ViewSonic Projector Pro9500 User Manual

126
ViewSonic
  Pro9500
Wired LAN
Subnet mask *1:   255.255.255.128 
(example)
2) Click the [Connect].
3) 
 The network connection will be established.  
Proceed to item 1.8 Confirming the 
connection to your destination .
1) 
 Enter the following information for the 
projector.
*1 
 If you use a Subnet mask other than Class A, B or C, this screen appears.
• If you require the network setting information on the projector , take 
the following procedure to find it out.
1) 
 
Turn on the projector, and...

127
ViewSonic
  Pro9500
1.6 Manual configuration
There are 3 options for the manual 
configuration.
If you select Configure Network Settings 
Manually, proceed to item 1.7 Configuring the 
network settings manually.• Profile
• History
• Configure Network Settings Manually
• To check the setting in a profile data, follow the process below.
1) Choose a profile data that you want to check.
2) 
 
Move the mouse cursor to the profile data, and click the right button on the 
mouse to display a pop-up menu.
3)...

128
ViewSonic
  Pro9500
• The number of the history record is maximum 10 for each network 
adapter. When the 11th data is stored, the oldest record among the 10 will be 
overwritten.
• The date & time information in each history record is renewed when the 
network is connected by using the history record.
• If the DHCP is set on in the projector, the network connection between the 
projector and computer may not be established since IP address may be 
varied.
• Even if you use the profile connection, it...

129
ViewSonic
  Pro9500
All setting for the network connection between 
the projector and computer is input manually.
Select the [Configure Network Settings 
Manually].
1.7 Configuring the network settings manually
The information to be input manually is different, depending on how you want to 
connect the projector and computer. 
If you use the wired LAN, go to Wired LAN. Wired LAN The projector is required to be connected to an access point by a LAN cable. Wireless LAN
1. Connection to the network 

130
ViewSonic
  Pro9500
Wireless LAN
SSID: WirelessAccessPoint (example)
Encryption: WEP64bit (example)
Encryption key *2:  ********** (example)
Mode: INFRASTRUCTURE
2) Click the [Next].
3) 
 Enter the following information that is set in 
the projector. *3
IP address : 192.168.1.10 (example)
Subnet mask: 255.255.255.0 (example)
4) Click the [Connect].
5) 
 The wireless connection will be established.  
Proceed to item 1.8 Confirming the connection to your destination .
1) 
 The setting on the access...

131
ViewSonic
  Pro9500
Wired LAN
IP address : 192.168.1.10 (example)
Subnet mask : 255.255.255.0 (example)
2) Click the [Connect].
3) 
 The network connection will be established.  
Proceed to item 1.8 Confirming the connection to your destination .
1) 
 Enter the following information for the 
projector. *1
Consult to the network administrator.  Log in the Windows under Administrator 
authority. After that, please resume at item 1.3.2 Starting the “LiveViewer”.
[Troubleshooting]
n A network connection...

132
ViewSonic
  Pro9500
1.7 Configuring the network settings manually (continued)
1. Connection to the network
This dialog will be displayed when you 
need to add a Network configuration on 
your computer to connect to the projector.  
Confirm with your network administrator if 
the Network configuration displayed on the 
dialog is OK, and then click the [Yes].
n 
 If you need to add a Network configuration on your computer to connect to the 
projector.
Click the [NO], then the “LiveViewer” main menu is...

133
ViewSonic
  Pro9500
1.7 Configuring the network settings manually (continued)
1. Connection to the network
If the entered IP address and projector's IP 
address are the same, a warning dialog shown 
to the right will be displayed.  
Click the [OK], and then enter a different IP 
address from the projector's one in the dialog 
for changing Network configuration.
If the connection is not available with the 
entered Network configuration, a warning 
dialog shown to the right will be displayed....

134
ViewSonic
  Pro9500
1.8 Confirming the connection to your destination
When the network connection is established, 
the “Connection to Projector successful” screen 
is displayed.
Make sure that the right projector that you want 
to send your image to is selected, by checking 
the projector name and IP address shown in 
the screen. 1.8.1 Connection and transmission
•   
To send images to the projector, click the  [Yes]. The transmission will be started.
To display the transmitted images, select the...

135
ViewSonic
  Pro9500
1.8 Confirming the connection to your destination (continued)
The projector you want to send your images 
to is in the Slideshow mode in the PC-LESS 
Presentation.
n 
 
A Slideshow is currently running on the projector that you are trying to display to.
The projector is not set to the LAN as an 
input signal.
n 
 Are you sure you want to change the input channel of the Projector to LAN? •   Click 
the [Yes], then the projector will stop 
the Slideshow and switch the input source...