ViewSonic Projector Pro9500 User Manual

116
ViewSonic
  Pro9500
• If the DHCP is set on in the projector, the network connection 
between the projector and computer may not be established since IP  address 
may be varied. If you like to use the My Connection, set the DHCP  off in the 
projector.
• If no profile data is assigned to the My Connection, it can’t be used. NOTE
Proceed to item 1.8 Confirming the connection to your destination
.
[Troubleshooting] Select the [My Connection]  and click the 
[Connect].
If you select the My Connection,...

117
ViewSonic
  Pro9500
n  Are you sure you want to connect the selected projector?
The message is appeared when the 
wireless adapter you selected is already 
used for another network connection. 
• 
 To connect, click the [Yes]. Proceed to 
item 1.8 Confirming the connection to 
your destination .
• 
 Not to connect, click the [No] to return to 
the screen to select the network connection 
mode.
1. Connection to the network
1.4 Selecting the network connection mode (continued) 

118
ViewSonic
  Pro9500
1.5 Selecting the network connection method
There are some options to connect to the 
network.
• Enter PassCode
• Configure Manually
• Select From List
Select From List
Before selecting this item, your computer and the projectors need to be connected 
to the same network.
If the connection is already established, select the  [Select From List].
From the list of the projectors connected to the network, select which projector 
you would like to send your images. Proceed to  1.8...

119
ViewSonic
  Pro9500
1.5.1 Passcode connection
The unique Passcode system brings you very quick and simple connection to the 
network.
The Passcode is a code that expresses the network setting in the projector . If you 
input the code in the “LiveViewer” in your computer, the network setting in the projector 
and computer can be matched and the connection will be established immediately .
The section is intended to explain how to use the Passcode.
• The Passcode system does not work under the...

120
ViewSonic
  Pro9500
1)  Turn on the projector, and make sure that the projector image is on screen.
2)   Press the MENU button on the remote control or the ▲/▼ buttons on the 
projector to show the menu on screen.
3) 
 Use the ▲/▼ cursor buttons to select the “ADVANCED MENU”, and use the 
► cursor button to enter the item.
4) 
 Use the ▲/▼ cursor buttons to select the NETWORK, and use the ► cursor 
button to enter the item.
5) 
 Use the ▲/▼ cursor buttons to select the INFORMATION, and use the ►...

121
ViewSonic
  Pro9500
• When entering the Passcode, capital and small letters are not 
distinguished.
• If you are using a Subnet mask other than Class A, B or C, you will have to 
establish the connection manually.
If the manual setting screen is displayed, please follow item  1.5.1 (3).
NOTE
If you select [Enter PassCode] at item 1.5, 
the “Please enter the PassCode” screen is 
displayed. Please enter the Passcode divided 
4-digit each in 3 boxes (total 12-digit).
Example PASSCODE: 1234 - 5678 -...

122
ViewSonic
  Pro9500
Windows prevented network configuration 
changes.
You may log in the Windows under User 
authority.
Click the [OK], then the “LiveViewer” main 
menu is displayed even though the network 
is not established. Click 
 on the main and 
go back to item 1.5 Selecting the network 
connection method .
This dialog will be displayed when you 
need to add a Network configuration on 
your computer to connect to the projector.  
Confirm with your network administrator if 
the Network...

123
ViewSonic
  Pro9500
If you want to change the Network 
configuration to add, click the [Change]. A 
dialog for changing the Network configuration 
as shown to the right will be displayed. Enter 
IP address and subnet mask , then click the 
[OK]. Procedure to connect to the projector 
will start. 
Proceed to item 1.8 Confirming the 
connection to your destination .
If you click the [Cancel], you will return to the 
dialog for adding a Network configuration.
If the entered IP address and...

124
ViewSonic
  Pro9500
The message is appeared when the wireless 
adapter you selected is already used for 
another network connection. 
• 
 To connect, click the [Yes]. Proceed to item 
1.8 Confirming the connection to your 
destination .
• 
 Not to connect, click the [No] then the 
“LiveViewer” main menu is displayed even 
though the network is not established.   
Click 
 on the main menu to go back 
to item 1.5 Selecting the network 
connection method .
n Are you sure you want to connect the...

125
ViewSonic
  Pro9500
After entering the Passcode, you are required to enter the network configuration 
manually if you use a Subnet mask other than Class A, B or C. (3) Configuring manually
Wireless LAN
The projector is required to be connected to an access point by a LAN cable.
1. Connection to the network
1.5 Selecting the network connection method (continued)
SSID : WirelessAccessPoint (example)
Encryption: WEP64bit (example)
Encryption key *2:  ********** (example)
2) 
 The setting on the...