ViewSonic Projector Pro9500 User Manual

136
ViewSonic
  Pro9500
When the connection to the projector could not 
be established, an error message, “Network 
Connection not established”, will come up.
Click
 the [OK] then the “LiveViewer” main 
menu is displayed even though the network 
is not established. Click 
 on the main menu 
to go back to item 1.5 Selecting the network 
connection method .
1.8.2 Connection error 1.8 Confirming the connection to your destination (continued)
• Check the network setting in the projector, and retry the...

137
ViewSonic
  Pro9500
1.9 Profile data
The network setting to connect the projector and computer can be stored as a 
profile data. Once the data is stored, all you need to do is to select the data to 
connect to the network. It is recommended when the same network connection is 
often used. 1.9.1 Outline of  Profile data
The profile data is made on the Manual 
Configuration screen.
Up to 10 profile data can be stored for each 
network adapter.
1) Select
 the [Profile] and click the [New].
2) 
 
The...

138
ViewSonic
  Pro9500
If necessary, the profile data can be edited on 
the Manual Configuration screen.
1) 
 Select
 the [Profile], and select one of the 
data listed in the window.
2) Click
 the [Edit].
3) The “Edit profile” screen will come up. 
4) 
 
Edit the information required to be revised.  
If you want to clear all information in the 
window, click
 the [Clear].
5) 
 
Click
 the  [OK], after the editing is completed.
If you don’t want to store it, click
 the  [Cancel] .
1.9.3 Editing Profile...

139
ViewSonic
  Pro9500
1.9.4 Registering My Connection 1.9 Profile data (continued)
One of the profile data, which is often used, can be registered as the My 
Connection profile data. Once the data is registered, all you need to do is to select 
the My Connection to connect to the network.
1) Click the [My Connection].
2) 
 The “Add My Connection” screen will come 
up.  
The currently selected profile data for the My 
Connection is shown with a check mark in 
the list.
3) 
 Select one of the profile...

140
ViewSonic
  Pro9500
1.9 Profile data (continued)
• If there are already 10 profile data, the check box cannot be checked. 
Please erase one of the existing profile data.
• The profile name for the stored data is assigned by the “LiveViewer” 
automatically. The name will be shown at the right side of the check box. NOTE
Also, you can register a profile data to My 
Connection, when the network connection 
is established. When it is established, the 
“Connection to Projector successful” screen is...

141
ViewSonic
  Pro9500



2.1 Using the “LiveViewer”
When you get the connection between your projector and computer, the 
“LiveViewer” main menu will be shown on the computer screen.
On the main menu you can configure settings and operate functions to send your 
images to the projector.
1) 
 Menu Type 
There are 2 type of the main menu, Easy type and Advanced type, which can 
be switched on screen.
2.1.1 Main menu and Operating buttons
• 
 When the network connection is not established, the...

142
ViewSonic
  Pro9500
2. Network Presentation
2.1 Using the “LiveViewer” (continued)
   Hold button
The image on screen is temporally frozen.  
The last image before the button is clicked is remained on screen.  
You can revise the image data on your computer without showing it on the 
projector’s screen.
 
 Display mode button
The button switches the Single PC mode and Multi PC mode.
 
 Connect button
The screen to select the connection mode is displayed.  
Go to item 1.5.
 
 Option button
The...

143
ViewSonic
  Pro9500
2.1.2 Displaying the status
1) 
 Indicator 
The indicator shows the following status.
2) 
 Status Display in Multi PC mode  
The icon is displayed at the right end of the Display mode buttons.  
One of the following icons to inform which quarter screens are used will be 
shown. 
• The status display is refreshed in every 3 seconds.
• If the status cannot be acquired, it will not be refreshed. NOTE
Indicator Status Note
Not connectedThe network connection to the projector is 
not...

144
ViewSonic
  Pro9500
2.1.3 Switching the display mode
The “LiveViewer” has the Single PC mode and Multi PC mode. The modes can be 
switched on the main menu.
1) 
 Click the 
 button on the main menu.
The buttons below are displayed.
2) 
 
Select from  to  buttons, and click it.
 Switching to the Single PC mode : Your image is displayed on full screen.
- Switching to the Multi PC mode : 
 Your image is displayed on a quarter 
screen identified in the button.
3) 
 
The projector screen is switched...

145
ViewSonic
  Pro9500
2.1.4 Option menu
Clicking the Option button displays the option menu on screen.
 
 Optimize Performance 
The “LiveViewer” captures computer screen in JPEG data and sends the 
JPEG data to the projector. The “LiveViewer” has two options that have 
different compression rate of JPEG data.
  
 “Not displaying confirmation dialog for adding Network settings” 
This setting allows you to choose to display or not the confirmation dialog 
for adding a Network configuration when you...