ViewSonic Projector Pro9500 User Manual

56
ViewSonic
  Pro9500
SCREEN menu
Item Description
C.C.
(Closed Caption) The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption...

57
ViewSonic
  Pro9500
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to execute 
the item, except for the items LAMP TIME and FILTER 
TIME. Then perform it according to the following table.
Item Description
AUTO SEARCH Using the ▲/▼ buttons turns on/off the automatic signal search 
function.ON 
ó  OFF
When the ON is selected, detecting no signal automatically...

58
ViewSonic
  Pro9500
OPTION menu
Item Description
AUTO POWER  OFF Using the ▲/▼ buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes)  ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with 
 
no-signal or an unsuitable signal reaches at the set time, the 
projector lamp will be turned off. 
If one of the projector's buttons or the...

59
ViewSonic
  Pro9500
OPTION menu
Item Description
LAMP TIME The lamp time is the usage time of the lamp, counted after the last 
resetting. It is shown in the OPTION menu.
Pressing the RESET button on the remote control or the ► button 
of the projector displays a dialog. 
To reset the lamp time, select the OK using the ► button.
CANCEL
 ð  OK
• Please reset the lamp time only when you have replaced the lamp, 
for a suitable indication about the lamp.
• 
For the lamp replacement, see the section...

60
ViewSonic
  Pro9500
OPTION menu
Item Description
MY BUTTON This item is to assign one of the following functions to 
MY BUTTON 
1/2 on the remote control.
(1)
  Use the ▲/▼ buttons on the MY BUTTON menu to select a MY 
BUTTON - (1/2) and press the ► or ENTER button to display the 
MY BUTTON setup dialog. 
(2)
  Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the ENTER or INPUT 
button to save the setting.
• LAN: Selects input from LAN port.
• USB TYPE...

61
ViewSonic
  Pro9500
OPTION menu
Item Description
MY BUTTON (Continued )• 
 ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE.
• 
 
FILTER RESET: Displays the filter time reset confirmation dialogue.
• 
 
TEMPLATE: Makes the template pattern selected to the 
TEMPLATE item appear or disappear.
• 
 
AV MUTE: Turns the picture and audio on/off.
• 
 
RESOLUTION: Turns on/off the RESOLUTION dialog.
• 
 
MIC VOLUME: Turns  on/off the MIC VOLUME dialog.
• 
 
ECO MODE: Turns...

62
ViewSonic
  Pro9500
OPTION menu
Item Description
SERVICE Selecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the ENTER 
button on the remote control to execute 
the item.
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed of the cooling fans. 
The HIGH is the mode for use at highlands etc. If the projector is used 
at an altitude of about 1200 m or higher, select HIGH. Otherwise, select 
NORMAL. Note that the projector is noisier...

63
ViewSonic
  Pro9500
OPTION menu
Item Description
SERVICE
(continued) KEY LOCK
(1)
  Use the ▲/▼ buttons to choose the operations control.CONTROL PANEL  ó REMOTE CONTROL
(2)
  
Use the ◄/► buttons to select ON or OFF.
ON ó OFF
Selecting ON in Step 2 locks the buttons except  STANDBY/ON on 
the operations control selected in Step 1. Selecting OFF releases 
the locked buttons on the operations control selected in Step 1.
• Please use this function to prevent tampering or accidental 
operation. 
REMOTE...

64
ViewSonic
  Pro9500
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION (continued)
COMMUNICATION TYPE
Select the communication type for transmission via 
the CONTROL port.
NETWORK BRIDGE
 ó  OFF
NETWORK BRIDGE: 
Select this type, if it is required 
to control an external device as a network terminal, 
via this projector from the computer. 
The CONTROL port doesn't accept RS-232C 
commands (
6. Network Bridge Function  in the 
Network Guide)
OFF : Select this mode to receive RS-232C...

65
ViewSonic
  Pro9500
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION (continued)
RESPONSE LIMIT TIME
Select the time period to wait for receiving 
response data from other device communicating by 
the NETWORK BRIDGE and the HALF-DUPLEX 
through the CONTROL port.
OFF  ó 1s 
ó 2s 
ó 3s
    
OFF : Select this mode if it is not required to check 
the responses from the device that the projector 
sends data to. In this mode, the projector can 
send out data from the computer continuously.
1s...