ViewSonic Projector Pro9500 User Manual

6
ViewSonic
  Pro9500
Introduction
Introduction
The projector provides you with the broad use by the following features.
ü   
 This projector has a variety of I/O ports that supposedly cover for any 
business scene. The HDMI port can support various image equipment which 
have digital interface to get clearer pictures on a screen.
ü   
 This projector has a 1.7 times optical zoom, horizontal and vertical manual 
lens shift, allowing flexible installation.
ü   
 If you insert a USB storage device, such...

7
ViewSonic
  Pro9500
Introduction
Part names
Projector
(1) Lamp cover
The lamp unit is inside. 
(2) Speakers (x2)
(3) Filter cover The air filter and intake vent are inside.
(4) Elevator feet (x2)
(5) Elevator buttons (x2)
(6) Remote sensor
(7) Lens
(8) Lens cover
(9) Pocket caps
(10) Intake vents
(11) Control panel
(12) Lens adjuster door The adjusters for the lens are behind 
the door. 
(13) AC IN (AC inlet)
(14) Exhaust vent
(15) Rear panel
(16) Security bar
(17) Battery cover The internal clock...

8
ViewSonic
  Pro9500
Introduction
Part names (continued)
Control panel and Lens adjusters 
LOCK
(1) Lens adjuster door
(2) FOCUS ring
(3) ZOOM ring
(4) HORIZONTAL (horizontal) adjuster
(5) VERTICAL (vertical) adjuster
(6) LOCK (horizontal lens position lock)
(7) STANDBY/ON button
(8) INPUT button
(9) MENU button
(10) SECURITY indicator
(11) LAMP indicator
(12) TEMP indicator
(13) POWER indicator
(14) Cap storage pockets 
Rear panel
(1) LAN port
(2) USB TYPE A port
(3) HDMI port
(4) USB TYPE B port
(5)...

9
ViewSonic
  Pro9500
Introduction
Part names (continued)
Remote control 
Back of                           
the remote control
(2)
(1)
(6)
(5)
(16)
(8)
(9)
(19)
(17)
(20)
(22)
(24)
(10)
(4)
(3)
(7)
(12)
(14)
(11)
(13)
(15)
(18)
(21)
(23)
(25)
(26)
VIDEODOC.CAMERA
KEYSTON
E
ASPECT SEARCH
BLANK
M\fTE
MY B\fTTO N
POSITION
1 2
ESC ENTERMEN\fRESET
COMP\fTER
MY SO\fRCE\bA\fTO
MAGNIF
YPAGE
      \fPVOL\fME
DOWNo
ONOF
F
9×
FREEZE
(1) VIDEO button
(2) COMPUTER button
(3) SEARCH
 button
(4) STANDBY /ON button...

10
ViewSonic
  Pro9500
Setting up
Setting up
Install the projector according to the environment 
and manner the projector will be used in.
For the case of installation in a special state 
such as ceiling mount, the specified mounting 
accessories and service may be required. 
Before installing the projector, consult your 
dealer about your installation.
(continued on next page)
Arrangement
Refer to the following tables T-1 to determine the screen size and projection 
distance. The values shown in the...

11
ViewSonic
  Pro9500
Setting up
Arrangement (continued)
WARNING
(continued on next page)►Install the projector where you can access the power 
outlet easily. If an abnormality should occur, unplug the projector urgently. 
Otherwise it could cause a fire or electric shock.
►Do not subject the projector to unstable conditions.  If the projector falls 
or topples over, it could result in injury or damage to the projector and the 
surrounding things. Using a damaged projector could result in a fire and an...

12
ViewSonic
  Pro9500
Setting up
Arrangement (continued)
►Place the projector in a cool place with sufficient 
ventilation.  The projector may shutdown automatically or may malfunction if its 
internal temperature is too high.
Using a damaged projector could result in a fire and an electric shock.
• 
 
Do not place the projector in direct sunlight or near hot objects such as heaters. 
• 
 
Keep a space of 30 cm or more between a side of the projector and other 
objects such as walls.
• 
 
Do not place...

13
ViewSonic
  Pro9500
Setting up
Connecting with your devices
Before connecting the projector to a device, consult the manual of the device to 
confirm that the device is suitable for connecting with this projector and prepare 
the required accessories, such as a cable in accord with the signal of the device. 
Consult your dealer when the required accessory did not come with the product or 
the accessory is damaged.
After making sure that the projector and the devices are turned of f, perform 
the...

14
ViewSonic
  Pro9500
Setting up
Connecting with your devices (continued)
Computer
• Before connecting the projector to a computer, consult the computer’s 
manual and check the compatibility of the signal level, the synchronization 
methods and the display resolution output to the projector. 
- 
 
Some signal may need an adapter to input this projector.
- 
 
Some computers have multiple screen display modes that may include some 
signals which are not supported by this projector.
- 
 
Although the...

15
ViewSonic
  Pro9500
Setting up
Connecting with your devices (continued)
Computer
Access 
point
USB 
storage 
device
(continued on next page)
• If an oversized USB storage device blocks the  LAN port, use a USB 
extension cable to connect the USB storage device.
NOTE
► Before connecting the projector to a network system be sure 
to obtain the consent of the administrator of the network.
►Do not connect the LAN port to any network that might have the excessive 
voltage.
►Before removing the USB storage...