ViewSonic Projector Pro9500 User Manual

							
146
ViewSonic
  Pro9500
  Presenter Mode
In the Single PC mode, the projector can be occupied by one computer 
and can block an access from any other computer, if the Presenter mode is 
selected in the “LiveViewer”. 
While making your presentation, you don’t need to worry that the image on 
screen is unexpectedly switched to an image sent by another computer . 
If you want to turn it on, put a check mark in the check box.
• If the Multi PC mode is selected, the setting for the Presenter mode is 
invalid.
• When switching from the Multi PC mode to the Single PC mode, the Presenter 
mode setting of the computer is valid.
• The Presenter Mode is set valid in factory default setting.
• In addition to using the software menu on the computer on which Presenter 
Mode is turned on, you can cancel this function by using the projector's OSD 
menu QUIT PRESENTER MODE EXECUTE of the PRESENTATION item in 
the NETWORK menu. NOTE
 
 
Display User Name
A “User Name” that is up to 20 letters can be input by using alphanumeric 
characters. 
The user name can be displayed on the projector screen, so you can find out 
whose image is currently on the screen.  
(Refer to NETWORK menu in the Operating Guide ) 
If the check box is not marked, the information is not sent to the projector .
2. Network Presentation
2.1 Using the “LiveViewer” (continued) 
						

							
147
ViewSonic
  Pro9500
2. Network Presentation
2.2 Starting the Network Presentation
This chapter explains the Network Presentation feature with which you can project 
computer images transmitted through a network. 
The “LiveViewer” allows you to project images from one or multiple computers by 
connecting the projector to an existing network without using computer cables.
This Network Presentation feature helps you to smoothly make your presentations 
and conduct conferences.
To start the Network Presentation, select the LAN port as the input source on the 
projector and click the Starting Capture button on the “LiveViewer”.
2.2.1 Display mode
Two display modes, Single PC mode and Multi PC mode, are available for the 
Network Presentation.
1) Single PC mode
The projector displays images sent by one computer. 
						

							
148
ViewSonic
  Pro9500
2. Network Presentation
2.2 Starting the Network Presentation (continued)
2.2.2 Presenter mode
2.2.3 Display User Name In the Single PC mode, the projector can be occupied by one computer and can 
block an access from any other computer, if the Presenter mode is selected in the 
“LiveViewer”.
While making your presentation, you don’t need to worry that the image on screen 
is unexpectedly switched to an image sent by another computer. 
The Presenter mode can be set on the Option menu in the “LiveViewer” main 
menu.
A “User Name” can be input in the “LiveViewer”, which is displayed on screen 
by operating the menu on the projector. So, it can be found out whose image is 
currently displayed on screen. 2) Multi PC mode
The projector screen is divided to 4 zones. The projector displays images in 
one zone sent by a computer, so that the projector can display images sent by 
up to 4 computers at the same time.
1 2
34 
						

							
149
ViewSonic
  Pro9500
3. Web Control
You can adjust or control the projector via a network from a web browser on a 
computer that is connected to the same network.
• Internet Explorer 6.0 or later is required.
• If JavaScript is disabled in your web browser configuration, you must enable 
JavaScript in order to use the projector web pages properly. See the Help files 
for your web browser for details on how to enable JavaScript.
• It is recommended that all web browser updates are installed.  NOTE
3. Web Control 
						

							
150
ViewSonic
  Pro9500
3. Web Control
3.1 Logon
To use the Web Control function, you need to logon with your user name and 
password.
Refer to the following for configuring or controlling the projector via a web browser. 
1) 
 
Display the logon window as shown on the right.
There are two options to display this window. 
 Using the “LiveViewer” Connect your computer and the projector 
via Network using the “LiveViewer”.
Then click the Web Control button 
 on 
the “LiveViewer” main menu to start the 
Web browser software. 
 Using Web browser software Make sure that your computer and the 
projector is connected via network, and 
then start Web browser. 
Enter the projector's IP address into URL 
input box of the Web browser as the example below, and then press the 
Enter key or 
 button.
Example: 
 
If the IP address of the projector is set to 192.168.1.10 :
Enter “http://192.168.1.10/” into the address bar of the web 
browser and press the Enter key or click 
 button.
2) 
 
Enter your user name and password, and then click the  [OK].
Example: If the IP address of the projector is set to 192.168.1.10
:
• The language used on the Web Control screen is the same as that 
of the OSD on the projector. If you want to change it, you need to change the 
OSD language on the projector. (SCREEN menu in the Operating Guide )
NOTE 
						

							
151
ViewSonic
  Pro9500
Below are the factory default settings for user name and password.
User namePassword
Administrator 
If you logon successfully, the screen below will be displayed.
Main menu
3)  Click the desired operation or configuration item on the main menu.
3.1 Logon (Continued)
3. Web Control 
						

							
152
ViewSonic
  Pro9500
3.2 Network Information
Displays the projector’s current network configuration settings.
Item Description
Projector Name Displays the projector name settings.
DHCP Displays the DHCP configuration settings.
IP Address Displays the current IP address.
Subnet Mask Displays the subnet mask.
Default Gateway Displays the default gateway.
DNS Server Address Displays the DNS server address.
MAC Address Displays the ethernet MAC address.
3. Web Control 
						

							
153
ViewSonic
  Pro9500
3.3 Network Settings
Displays and configures network settings.
Item Description
IP Configuration Configures network settings.
DHCP ON Enables DHCP.
DHCP OFF Disables DHCP.
IP Address Configures the IP address when DHCP is disabled.
Subnet Mask Configures the subnet mask when DHCP is disabled.
Default Gateway Configures the default gateway when DHCP is disabled.
Projector Name Configures the name of the projector.
The length of the Projector Name can be up to 64 alphanumeric 
characters. Only alphabets, numbers and following symbols 
can be used.  !"#$%&'*+,-./:;?@[\]^_`{|}~ and space. 
Particular projector name is pre-assigned by default.
sysLocation (SNMP)
Configures the location to be referred to when using SNMP.The length of the sysLocation can be up to 255 alphanumeric 
characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.
sysContact (SNMP)Configures the contact information to be referred to when 
using SNMP.The length of the sysContact can be up to 255 alphanumeric 
characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.
DNS Server Address
Configures the DNS  server address.
AMX D.D.
(AMX Device Discovery)
Configures the AMX Device Discovery setting to detect the projector 
from the controllers of AMX connected to the same network. For the 
details of AMX Device Discovery, visit the AMX web site.
URL: http://www.amx.com
• The new configuration settings are activated after restarting the network connection. 
When the configuration settings are changed, you must restart the network connection. You can 
restart the network connection by clicking the [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network 
administrator before setting server addresses. NOTE
3. Web Control
Click the [Apply] button to save the settings. 
						

							
154
ViewSonic
  Pro9500
3.4 Port Settings
Displays and configures communication port settings.
Item Description
Network Control Port1 
(Port:23) Configures command control port 1 (Port:23).
Port open Click the [Enable] check box to use port 23.
Authentication Click the [Enable] check box when authentication is required 
for this port.
Network Control Port2 
(Port:9715) Configures command control port 2 (Port:9715).
Port open Click the [Enable] check box to use port 9715.
Authentication Click the [Enable] check box when authentication is required 
for this port.
PJLink
TM Port 
(Port:4352) Configures the PJLinkTM port (Port:4352).
Port open Click the [Enable] check box to use port 4352.
Authentication Click the [Enable] check box when authentication is required 
for this port.
My Image Port
(Port:9716) Configures the My Image Port (Port:9716).
Port open Click the [Enable] check box to use port 9716.
Authentication Click the [Enable] check box when authentication is required 
for this port.
Messenger Port
(Port:9719) Configures the Messenger Port (Port:9719).
Port open Click the [Enable] check box to use port 9719.
Authentication Click the [Enable] check box when authentication is required 
for this port.
3. Web Control 
						

							
155
ViewSonic
  Pro9500
Item Description
SNMP Port Configures the SNMP port.
Port open Click the [Enable] check box to use SNMP.
Trap address Configures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain 
name if the valid DNS server is setup in the 
Network 
Settings. The maximum length of host or domain name is up 
to 255 characters.
Download MIB file Downloads a MIB file from the projector.
Network Bridge Port Configures the Bridge port number.
Port Number Input the port number. 
Except for 9715, 9716, 9719, 9720, 5900, 5500, 4352 
between 1024 and 65535 can be set up. It is set to 9717 as 
the default setting.
Click the [Apply] button to save the settings. 3.4 Port Settings (Continued)
• The new configuration settings are activated after restarting the 
network connection. When the configuration settings are changed, you must 
restart the network connection. You can restart the network connection by 
clicking the  [Network Restart]  on the main menu.
NOTE
3. Web Control