ViewSonic Projector Pro9500 User Manual

							
166
ViewSonic
  Pro9500
3.10 Projector Control (Continued)
Item Description
PICTURE BRIGHTNESS Adjusts the brightness setting.
CONTRAST Adjusts the contrast setting.
GAMMA Selects the gamma setting.
COLOR TEMP Selects the color temperature setting.
COLOR Adjusts the color setting.
TINT Adjusts the tint setting.
SHARPNESS Adjusts the sharpness setting.
ACTIVE IRIS Selects the active iris setting. 
MYMEMORY SAVE Saves the MyMemory data.
MYMEMORY RECALL Recalls the MyMemory data.
IMAGE ASPECT Selects the aspect setting.
OVER SCAN Adjusts the over scan setting.
V POSITION Adjusts the vertical position.
H POSITION Adjusts the horizontal position.
H PHASE Adjusts the horizontal phase.
H SIZE Adjusts the horizontal size.
AUTO ADJUST 
EXECUTE Performs the automatic adjustment.
INPUT PROGRESSIVE Selects the progressive setting.
VIDEO NR Selects the video noise reduction setting.
COLOR SPACE Selects the color space.
COMPONENT Selects the COMPONENT port setting.
S-VIDEO FORMAT Selects the s-video format setting.
C-VIDEO FORMAT Selects the video format setting.
HDMI FORMAT Selects the HDMI
TM format setting.
HDMI RANGE Selects the HDMITM range setting.
COMPUTER IN1 Selects the COMPUTER IN1 input signal type.
COMPUTER IN2 Selects the COMPUTER IN2 input signal type. 
FRAME LOCK - 
COMPUTER IN1 Turns the FRAME LOCK-COMPUTER IN1 function on/off.
FRAME LOCK - 
COMPUTER IN2 Turns the FRAME LOCK-COMPUTER IN2 function on/off.
FRAME LOCK - HDMI Turns the FRAME LOCK-HDMI function on/off.
3. Web Control 
						

							
167
ViewSonic
  Pro9500
3.10 Projector Control (Continued)
Item Description
SETUP AUTO KEYSTONE 
EXECUTE Performs the automatic keystone distortion setting.
KEYSTONE V Adjusts the vertical keystone distortion setting.
KEYSTONE H Adjusts the horizontal keystone distortion setting.
PERFECT FIT Adjusts the shape of the projected image in each of the 
corners and sides.
AUTO ECO MODE Turns on/off the automatic eco mode function.
ECO MODE Selects the eco mode.
MIRROR Selects the mirror status.
STANDBY MODE Selects the standby mode.
MONITOR OUT - 
COMPUTER IN1 Assigns the 
MONITOR OUT  when the COMPUTER IN1  input 
port is selected.
MONITOR OUT - 
COMPUTER IN2 Assigns the 
MONITOR OUT  when the COMPUTER IN2  input 
port is selected.
MONITOR OUT -  LAN Assigns the MONITOR OUT when the LAN input port is 
selected.
MONITOR OUT - USB 
TYPE A Assigns the MONITOR OUT when the USB TYPE A input 
port is selected.
MONITOR OUT - USB 
TYPE B Assigns the MONITOR OUT when the USB TYPE B input 
port is selected.
MONITOR OUT - 
HDMI Assigns the MONITOR OUT when the HDMI input port is 
selected.
MONITOR OUT - 
COMPONENT Assigns the MONITOR OUT when the COMPONENT input 
port is selected.
MONITOR OUT - 
S-VIDEO Assigns the MONITOR OUT when the S-VIDEO input port is 
selected.
MONITOR OUT - 
VIDEO Assigns the MONITOR OUT when the VIDEO input port is 
selected.
MONITOR OUT - 
STANDBY Assigns the MONITOR OUT in the standby mode.
3. Web Control 
						

							
168
ViewSonic
  Pro9500
3.10 Projector Control (Continued)
3. Web Control
Item Description
AUDIO VOLUME Adjusts the volume setting.
SPEAKER Turns the built-in speaker on/off.
AUDIO SOURCE - 
COMPUTER IN1 Assigns the AUDIO SOURCE - COMPUTER IN1 input port.
AUDIO SOURCE - 
COMPUTER IN2 Assigns the AUDIO SOURCE - COMPUTER IN2 input port.
AUDIO SOURCE - 
LAN Assigns the AUDIO SOURCE - LAN input port.
AUDIO SOURCE - 
USB TYPE A Assigns the AUDIO SOURCE - USB TYPE A input port.
AUDIO SOURCE - 
USB TYPE B Assigns the AUDIO SOURCE - USB TYPE B input port.
AUDIO SOURCE - 
HDMI Assigns the AUDIO SOURCE - HDMI input port.
AUDIO SOURCE - 
COMPONENT Assigns the AUDIO SOURCE - COMPONENT input port.
AUDIO SOURCE - 
S-VIDEO Assigns the AUDIO SOURCE - S-VIDEO input port.
AUDIO SOURCE - 
VIDEO Assigns the AUDIO SOURCE - VIDEO input port.
AUDIO SOURCE - 
STANDBY Assigns the AUDIO SOURCE in the standby mode.
HDMI AUDIO Selects the HDMI
TM audio setting.
MIC LEVEL Selects the microphone level.
MIC VOLUME Adjusts the microphone volume setting.
SCREEN LANGUAGE Selects the language for the OSD.
MENU POSITION V Adjusts the vertical Menu position.
MENU POSITION H Adjusts the horizontal Menu position.
BLANK Selects the Blank mode.
START UP Selects the start up screen mode.
MyScreen Lock Turns MyScreen lock function on/off.
MESSAGE Turns the message function on/off.
TEMPLATE Selects the template setting.
C.C. - DISPLAY Selects Closed Caption DISPLAY setting.
C.C. - MODE Selects Closed Caption MODE setting.
C.C. - CHANNEL Selects Closed Caption CHANNEL setting. 
						

							
169
ViewSonic
  Pro9500
Item Description
OPTION AUTO SEARCH Turns the automatic signal search function on/off.
AUTO KEYSTONE Turns the automatic keystone distortion correction function 
on/off.
DIRECT POWER ON Turns the direct power on function on/off.
AUTO POWER OFF Configures the timer to shut off the projector when no signal 
is detected.
USB TYPE B Selects the USB TYPE B setting.
MY BUTTON-1 Assigns the functions for the MY BUTTON-1 button on the 
included remote control.
MY BUTTON-2 Assigns the functions for the MY BUTTON-2 button on the 
included remote control.
MY SOURCE Selects the My Source setting.
REMOTE FREQ. - 
NORMAL Turns the remote control signal frequency normal function 
on/off.
REMOTE FREQ. - 
HIGH Turns the remote control signal frequency high function on/
off.
3.10 Projector Control (Continued)
3. Web Control 
						

							
170
ViewSonic
  Pro9500
The items shown in the table below can be 
performed using the Projector Control menu. 
Click the [Quit Presenter Mode].
Item Description
SERVICE Quit Presenter Mode Quit compulsorily from the Presenter mode.
3.10 Projector Control (Continued)
3. Web Control 
						

							
171
ViewSonic
  Pro9500
3.11 Remote Control
You can use your Web browser to control the 
projector.
• Do not attempt to control the projector with 
the projector’s remote control and via your Web 
browser at the same time. It may cause some 
operational errors in the projector.
The functions on the bundled remote control are assigned to the W eb Remote 
Control screen.
Item Description
POWER Assigned the same operation as  STANDBY/ON button.
COMPUTER Assigned the same operation as  COMPUTER button.
VIDEO Assigned the same operation as  VIDEO button.
BLANK Assigned the same operation as  BLANK button.
FREEZE Assigned the same operation as  FREEZE button.
MUTE Assigned the same operation as  MUTE button.
MENU Assigned the same operation as  MENU button.
▲ Assigned the same operation as ▲ button.
▼ Assigned the same operation as ▼ button.
◄ Assigned the same operation as ◄ button.
► Assigned the same operation as ► button.
ENTER Assigned the same operation as  ENTER button.
RESET Assigned the same operation as  RESET button.
PAGE UP Assigned the same operation as  PAGE UP button.
PAGE DOWN Assigned the same operation as  PAGE DOWN button.
SLIDESHOW Starts the Slideshow.
3. Web Control
• The Web Remote Control does not support repeat function that 
performs an action while holding a button clicked down.
• Since the repeat function is not available, click the button repeatedly as many 
times as you require.
• 
Even if you hold the button clicked down for a while, the Web Remote Control 
sends your request command one time only. Release the button, then click it again. 
• When the [POWER] button is pushed, a message window comes up to confirm 
the operation. To control the power, push [OK], otherwise push [Cancel].
• The [PAGE DOWN] and [PAGE UP] buttons on the Web Remote Control 
cannot be used as mouse emulation function of the projector. NOTE 
						

							
172
ViewSonic
  Pro9500
3.12 Projector Status
Displays and configures the current projector status.
Item Description
Error Status Displays the current error status
Lamp Time Displays the usage time for the current lamp.
Filter Time Displays the usage time for the current filter.
Power Status Displays the current power status.
Input Status Displays the current input signal source.
Blank On/Off Displays the current Blank on/off status.
Mute Displays the current Mute on/off status.
Freeze Displays the current Freeze status.
3. Web Control 
						

							
173
ViewSonic
  Pro9500
3.13 Network Restart
Restarts the projector’s network connection.
Item Description
Restart Restarts the projector’s network connection in order to 
activate new configuration settings.
• Restarting requires you to re-log on in order to further control or 
configure the projector via a web browser. Wait 30 seconds or more after 
clicking the  [Restart] button to log on again.
NOTE
3. Web Control 
						

							
174
ViewSonic
  Pro9500
4. My Image Function
The projector can display still images that are transferred via the network.
• It is possible to allocate the image file up to 4 in the maximum.
• Using MY BUTTON that registered MY IMAGE can display transferred image.
(OPTION menu  in the Operating Guide )
• The image file also can be displayed by using schedule function from the web 
browser. Refer to item 7.3 Event Scheduling  in detail.
• If you display MY IMAGE data on screen while you are using the USB Display 
function, the application for the USB Display will be closed. To restart the 
application, exit the MY IMAGE function, and then the software in the projector, 
LiveViewerLiteUSB.exe, will run again. ( USB Display in the Operating Guide)
NOTE
Transfer image data
Display image data (
1 - 4)
MY IMAGE transmission requires an exclusive application for your computer. 
Use the application to transfer the image data. 
It can be downloaded from the ViewSonic web site (http://www.viewsonic.com/
products/pro9500.htm).
Refer to the manual for the application for instructions.
To display the transferred image, select the MY IMAGE item in the NETWORK 
menu. For more information, please see the description of the MY IMAGE item of 
the NETWORK menu. (NETWORK menu in the Operating Guide)
4. My Image Function 
						

							
175
ViewSonic
  Pro9500
4. My Image Function
4. My Image Function (Continued)
Configure the following items from a web browser when MY IMAGE function is 
used.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter "http://192.168.1.10/" into the address bar of the web browser.
2) 
 Enter your user name and password, and then 
click the [OK]. 
3) Click the [Port Settings] on the main menu.
4) 
 Click the [Enable] check box to open the My 
Image Port (Port: 9716). Click the [Enable] 
check box for the [Authentication]  setting 
when authentication is required, otherwise clear 
the check box.
5) Click the [Apply] button to save the settings.
When the authentication setting is enabled, the following settings are required.
6) Click the [Security Settings] on the main menu.
7) 
 Select the [Network Control] and enter the desired authentication password. 
8) Click the [Apply] button to save the settings. 
• The Authentication Password will be the same for  Network Control 
Port1 (Port: 23), Network Control Port2 (Port: 9715), PJLink™ Port (Port: 
4352) , My Image Port (Port: 9716) and Messenger Port (Port: 9719) .
• The new configuration settings are activated after restarting the network 
connection. When the configuration settings are changed, you must restart the 
network connection. You can restart the network connection by clicking the 
[Network Restart]  on the main menu.
NOTE