Toshiba Voice Processing Vp100 Installation And Maintenance Manual

., CONFIGURATION APPLICATIONS TERM ‘I.~L 
3-3 
r 
I files I files I 
I GNSSM 
- _ Greetings, 
Names, et& 
 
 
The following describes the VP 100 Software Package programs, directories, and files. and 
explains how they are organized on the PC hard disk. 
. 
._ 
. . - 
VMXCAn Directory used to store the executable CAT program and all C.\T 
program utilities. Various subdirectories within VMXCAlI m used 
to store VP 100 system software, VP 100 system prompts. individual 
system configuration, and log file...

3-4 lnstallanm and Maintenance Manual 
_ 
- CAT.tOG GNSSM 
There is one subdirectory below every SNxxxxxx. 100 nam,it 
GNSSXI. This subdirectory is used to backup Greetings. Tames. 
Scripted. and Sequential Messages. 
. 
File used to store a communication session with a selected L-P 100 on 
the CAT hard disk drive. This text file can be saved, deleted_ vie\ved 
and printed. The file is automatically created and/or updateif 
(appended) before each communication session w&h a selected VP 
100 system....

CONFIGURATION APPLICATIONS TEFiW;NAL 
3-5 
II Terminal Conventions 
- The follo\ving 
are the basic conventions and terminology used with the VP CAT. For further 
details, refer to ths operating manual provided with your PC. For a Summary of the INS 
commands. refer to Appendix A. 
1 
Arrow Keys Use the arrow keys on the keyboard to move the cursor or tishlight 
the various menu screens. 
.*- 
ALT Keys 
\- 
I 
Control Keys 
-. 
“‘ 
Escape (ESC) Key Press the IEscape] ke to exit any menu and return to...

3-6 Installarim and Maintenance Manual 
_ 
[F21 is used \vhen in the Select System screen in order to m&ify an 
existing System Name, ID. Serial Number. or Release of sy;rem 
software number. i 
, 
. 
a 
is used to obtain a directory of all mailboxes backed up on the 
CAT hard disk while in the Restore Greetings, Names, Scripred. and 
Sequential Messages menu. 
.*- 
Reverse Video The term “reverse video” refers to the appearance of characters on the 
screen. Reverse video is when the color normally used...

CONFIGURATION APPLICATIONS TERMINAL 3-7 
,’ 
. 3.2 LAPTOP PC DESCRIPTION AND SETUP 
This section provides information on laptop PC preparation. It is essential that the PC be set-up 
correctly before proceeding with the installation and operation of the CAT software. Consult the PC 
. 
owner’s manual for specific setup and installation procedures. 
- _ The set up parameters for the PC should include the following. 
f, 
n 
. 
Initial Setup 
.*- 
21ost PCs provide a setup program for configuring memory...

. 
3-8 Inxallation and Maintenance Manual 
- _ 
VP 100 SOFTWARE PACKAGE INSTALLATION 
This section explains ho\v to install the CAT soft\vare and VP 100 system software onto the’PC 
hard disk drive. Information on floppy diskette u-rite protection is also included in this section. All 
I 
prosrams and files are stored in subdirectories as described in the Software Description section in 
this chapter. If the CAT software is an update to an earlier release, the old version is-deleted and 
replaced with...

CONFIGURATION APPLICATIONS TERM ‘IAL 
3-9 
3 
_- 
- 
. . 
.I 
-. . 
. . - 
At the C:> prompt. type: 
A:IXSTALL -\I :Entsr 
-hl 
is optional. It Lvill adjust the rerm_inal display. _ 
A window menu appears. Select the PC type to be used. The following screens le>j you 
through the remainder of the install. 
e If this is the first time the C.aT program is being installed, the instaJ1 utility ri:es a 
_ L choice to modify the AUTOEXEC.BAT and CONFIGSYS tiles so the CAT program 
uill automatically start when...

3-10 /nsta/;zt;on and hfaaintenance Manual ’ 
When a new (different) release is installed, other releases previously installed ‘xe not 
affected, except to provide update procedures to the new release. A new direcrory is 
created for ths new release and 
files are copied into it. 
_- 
n 
- _ 
-. . 
n Reboot the PC  VP 100 System Prompts Installation 
The VP 100 System Prompts are supplied by Toshiba on 3.5 inch DS-HD fl6ppy disks. Insure 
the diskettes are wrire protected prior to installation. Refer to...

CONFIGURATION APPLICATIONS TERMINAL 3-11 
H 
Floppy Diskette Write Protection 
The 3.5 inch floppy diskettes have a square hole with a plastic tab in ths lower left-hand corner 
of the front of the diskette. Write protect the diskette by sliding the plastic tab on the back of 
the diskette toward the bottom edge.of the-diskette until it clicks. When !ou look at this hole 
from the front of the diskette, the plastic tab should 
not be visible through the hole. 
- _ 
Enlargement .,_ 
Enable Writing: Tab...

3-12 ;-xallation and Maintenance Manual 
3.4 COMMUNICATION WITH THE VP 100 
Terminal port I on the VP 100 supports. 
n EIA standard RS-237C serial. . 
n Asynchronous (ASCII) data with 7 data bit