Toshiba Voice Processing Vp100 Installation And Maintenance Manual

10-10 installation and Mahtenance Manual 
(5700) with 19-k. sending a call record to the CO to turn ON message waiting 
for extension 2945700. 
. With Release 6. i. two changes to the above process occur. First, the 
TR\NSLXTION Table can now be used to alter the extension as it appears in 
the USER Table in prepatation for creating a message waiting command. 
Second. the fist digit of the translated 
extension, not the mailbox, is used to 
identify leading digits from the PREFIX DIGITS Table. 
In our...

- _ 
off, leaving a mailbox number 945700. Checking the TRAKSLATTON Table, the 
system absorbs the 915 and replaces those digits yxith a 5. This leaves mailbox 
5700, \ hich is ;I valid entry in the USER Table. ;r=nd the call is processed 
accordingly. 
To creare an ourgoing messag: waiting comma&_ rhe system checks the extension 
number associared Lvith mailbox 5500 and finds tiat it is also 5500. There is no 
entry in the TRANSLATION Table for the first tisits 55, so the system checks the 
PREFIX...

10-12 hsta/Jation and Mainfenance hkwwal 
n After All Changes Have Been Made for MWI and CPI 
After all changes have been made for &l)W and/or CPI. remember to restart the system and test all 
functions. 
Restart . After the changes have been made. exit the UPDATE program. The VP 100, 
prompts: 
FOR CHAIIGES TO TAKE EFFECT, SYSTEM MUST BE RESTARTF&J 
Test 
Restart the system. . 
Test to ensure that MWI and/or CPI are operational 
- _ 
. 
. 
Toshiba VP Systems Release 6.1 December. 1992  

CENTREX ADAPTIVE INTEGRATION 10-13 
10.5 VP IOOKENTREX INSTALLATION 
The VP 100 is connected to the Ctntrex data link from the CO via a modem connected to the VP lO_O’s 
RS-232C interface port. System Terminal Port. 
One data link must be configursd 

10-14 /nsta/lation and Maintenance Manual 
10.6 
- _ 
SMDI CALL RECORDS 
c 
.%. 
The call record the VP 100 receives from the CO contains a combination of ASCII characters. The first 
two or three characters indicate whether the call regards a call directed to the VP 100 or message wairing 
information (an error condition regarding message waiting). 
. 
Call records beginning with “MD” have the following format - 
MDgggmmmmaxxxxxsx yygyyyy 
Call records indicating an error with message waiting begin with...

CENTREX ADAPTIVE INTEGRATION 
10-15 
n Message Desk (Calls Directed to the VP 100) _ 
Tne following are a few e\;amples oi actual records and their description: 
JID0010002D 
_ 
. 
Tnis is a direct call into ths \.P 100 c the message desk) from outside of the Centrex. It came into the 
\P 100 port having OOlOW defined as the station number in the PORTS Table. In this type of call. 
the caller hears the compann)- greeting. 
\ID0010002D 2948395 .‘- 
- 
This is also a call direct to the VP 100 but with a...

10-16 Installation and Maintenance Manual 
n Message Waiting (Response to Command the VP 100 Sent to SMDI) 
Anorher type of call record received is- for an error on a message waiting command to the SMDI. It 
means that the station number indicated is not 3 valid Centrex MWI number and has not been , 
programmed as such. . 
The 
following is an example of an error record: 
M1FI294839.5 INV 
l *- 
MWI is message waiting. 2948395 is the station for which message waiting stutter dial tone was to be...