Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual

ISDN
Programs *66-2 and *66-4 – Call-by-Call Trunk Group Codes and Network ID
Strata DK Programming 5/997-23
ISDN
Program *66-4 Call-by-Call Network ID
Processor Type:All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI
Initialized Default:Blank
Program *66-4 Overview
Some Call-by-Call services are provided by inter-exchange carriers. These services need a 
network ID code for call setup. When a Network ID Code is entered, the service parameters in 
*66-2 must be blank.
If both the Service Parameter...

ISDN
Program *66-3 – Channel Group/Trunk Parameters
7-24Strata DK Programming 5/99
Program *66-3 – Channel Group/Trunk Parameters
Processor Type:All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI
Initialized Default:Blank
LEDs 03~06 specify the trunk types shown in the following table.
Program *66-3 Overview
This program assigns special call treatment and defines the ISDN service. Call treatment includes 
whether or not operator calls are allowed, if carrier access is allowed, etc. The ISDN...

ISDN
Program *66-5 – Line Directory Number (LDN) Registration
Strata DK Programming 5/997-25
ISDN
Program *66-5 – Line Directory Number (LDN) 
Registration
Processor Type:DK40i, All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI and BRI
Initialized Default:Blank
Program *66-5 Overview
This program is used to assign seven-digit listed directory numbers per channel group. The index 
number assigned is correlated to a CO line port number in Program *66-6 for direct inward ringing 
assignments and to...

ISDN
Program *66-6 – LDN/Trunk Group to Channel Group Assignments
7-26Strata DK Programming 5/99
Program *66-6 – LDN/Trunk Group to Channel Group 
Assignments
Processor Type:DK40i, All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI and BRI
Initialized Default:Blank
 
Program *66-6 Overview
This program assigns Listed Directory Numbers (LDNs) trunk groups to the member’s channel 
group.
NoteThe number of direct appearing CO lines cannot exceed the number of CO ports allocated 
in Program 03. One...

ISDN
Program *66-7 – LDN/Trunk Group Assignments
Strata DK Programming 5/997-27
ISDN
Program *66-7 – LDN/Trunk Group Assignments
Processor Type:All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI
Initialized Default:Blank
Program *66-7 Overview
This program assigns Listed Directory Numbers (LDNs) to each ISDN trunk group. 




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Channel 
GroupLDN 
IndexTrunk Groups
12345678910111213141516
DIR = Trunk Group (1~16).
0 = blank. The lowest...

ISDN
Program *67-1 – Trunk Group Call Direction
7-28Strata DK Programming 5/99
Program *67-1 – Trunk Group Call Direction
Processor Type:All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI
Initialized Default:Both Way
Program *67-1 Overview
This program assigns the call direction for each ISDN trunk group. 




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
ValueTrunk GroupsCall Direction12345678910111213141516
1Incoming
2Outgoing
3Both Way
DIR = Call Direction
1 = Incoming
2 =...

ISDN
Program *67-2 – Call Types for ISDN Trunk Group Supported
Strata DK Programming 5/997-29
ISDN
Program *67-2 – Call Types for ISDN Trunk Group 
Supported
Processor Type:All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI
Initialized Default:Blank 
Program *67-2 Overview
This program defines the call type or “Bearer Services” allowed for each ISDN trunk group. These 
settings will be set for three different time zones in an upcoming release. All of the call types that 
will be used should be...

ISDN
Program *67-3 – ISDN Trunk Group Minimum Channel Reservation
7-30Strata DK Programming 5/99
Program *67-3 – ISDN Trunk Group Minimum Channel 
Reservation
Processor Type:All RCTUs (Release 4.1)
Program Type:Trunk, PRI
Initialized Default:Default = 00
Program *67-3 Overview
This program defines the minimum number of B-channels reserved for this service. Each of the 
three time zones may have a different value.
äEnter the minimum and maximum number of B-channels reserved for each Time Zone.



...

ISDN
Program *67-4 – ISDN Trunk Groups Maximum Channel Reservation
Strata DK Programming 5/997-31
ISDN
Program *67-4 – ISDN Trunk Groups Maximum Channel 
Reservation
Processor Type:All RCTUs (Release 4.1 or higher)
Program Type:Trunk, PRI
Initialized Default:23 maximum default channels
Program *67-4 Overview
This program specifies the maximum number of B-channels that can be used to carry calls with 
this service. Each of the three time zones may have a different value.
Use the record sheet with Program...

ISDN
Program *67-5 – Multiple Time Zone Settings
7-32Strata DK Programming 5/99
Program *67-5 – Multiple Time Zone Settings
Processor Type:All RCTUs (Release 4.1 or higher)
Program Type:Trunk, PRI
Initialized Default:Default = 0000
Program *67-5 Overview
This program enables setting three different time zones. In Release 4.1, the maximum number of 
lines that can be obtained by each trunk group and the minimum number of lines that can be 
sequred is programmable. By programming the max. and min. number...