Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual

Peripheral Installation
SMDR Printer/Call Accounting Device Options
Strata DK I&M    5/9910-39
Peripheral Installation
SMDR Programming
Program 03
©The SMDR output is provided by the PIOU or PIOUS with the lowest code assigned (41, 42, 
or 43).
©If using RSIU or RSIS PCB (DK424) in slot 11 for SMDR, set Program 03 code 49 for slot 11.
Notes
lWSIU (DK14) and TSIU (DK40i) do not require a Program 03 slot assignment.
lRSIU/RSIS (DK424) Program 76-1 code x2 overrides PIOU/PIOUS SMDR assignments and 
code 49...

Peripheral Installation
SMDR Printer/Call Accounting Device Options
10-40Strata DK I&M    5/99
Figure 10-21 PIOU/PIOUS SMDR Cable Connections
Basic Connection
3-pair
Modular
Cord (7 ft. max)
SMDR
Modular
Jack
Modular
Jack
Toshiba
PPTC1A-5M (25 pin), PPTC-25F, or PPTC9 (9-pin)
RS232, Modular AdapterDB25 or DB9
Plug
Basic Wiring
3
2
6
20
8
7
4 Jumper to 5RD
TD
DSR
DTR
CD
SG
RTS to CTS
50 ft. max
24 AWG Wire
Twisted Pair
Modularized
PPTC1A-5M Adapter
1
2
3
4
5
6to
to
to
to
to
to
6
5
4
3
2
1to
to
to
to
to...

Peripheral Installation
System Database Printout Using SMDR Port
Strata DK I&M    5/9910-41
Peripheral Installation
System Database Printout Using SMDR Port
If a printer is connected to the SMDR port, customer program information stored in the DK14, 
DK40i or DK424 RCTU RAM may be printed out for reference (see Figure 10-22).
Program 97
©Enables system program data to be printed via the SMDR port. See Program 97 record sheet.
Notes
lAn SMDR printer must be connected to the SMDR port to use the printout...

Peripheral Installation
Voice Mail Options
10-42Strata DK I&M    5/99
Voice Mail Options
Strata DK systems can support a Toshiba Stratagy, Stratagy DK, VP or customer-supplied voice 
mail system.
Voice mail systems connect to standard telephone circuits (QSTU2, KSTU2, RSTU2, RDSU/
RSTS, PSTU or PESU). The number of circuits required by each device depends on the 
customer’s voice mail requirements, such as the number of voice mail users. To support voice 
mail, DK14 KSU must have QCRU3 installed, DK40i...

Peripheral Installation
Voice Mail Options
Strata DK I&M    5/9910-43
Peripheral Installation
Figure 10-23 Voice Mail Block Diagram
Toshiba Stratagy, Stratagy DK, or Toshiba VP Programming
Some features of Strata DK system programming were designed for Toshiba Stratagy, Stratagy DK 
or VP systems, and do not necessarily apply to customer-supplied voice mail messaging systems. 
These programming features are:
Answer (A) Tone
The Strata DK stations send an answer tone to Stratagy or VP when the station...

Peripheral Installation
Voice Mail Options
10-44Strata DK I&M    5/99
Recall (B) Tone
Stations send a recall (B) tone to Stratagy or VP whenever Stratagy or VP answers a transfer 
(camp-on) recall from stations that did not answer a Stratagy or VP blind transfer. (The B tone 
notifies Stratagy or VP that the call is a recall and not a new call, allowing Stratagy or VP to 
respond with the appropriate greeting.) For this feature to operate, QSTU2, KSTU2, RSTU2, 
RDSU/RSTS, PSTU or PESU voice mail ports...

Peripheral Installation
Voice Mail Options
Strata DK I&M    5/9910-45
Peripheral Installation
Receive Auto Call Forward ID Codes
Provides auto digits from call forwarded stations to direct callers to station mailboxes. All VM 
ports should be set to receive auto ID code (Program 31, LED 16).
Voice Mail Program Checklist
Prior to Programming
Set Toshiba VP Maintenance Menu system parameters to “D” = Strata DK (any model). See 
Toshiba Stratagy, Stratagy DK, or VP documentation for other parameter...

Peripheral Installation
Voice Mail Options
10-46Strata DK I&M    5/99
advisable to turn Busy Station Transfer (LED 20) ON for all VM/Auto Attendant ports, and to 
turn Busy Station Ringing (LED 19) ON for all stations that must never be detected as busy 
when called by the VM/Auto Attendant port. Also turn LED 03 OFF to disable standard 
telephone MW signal to VM ports.
©Program 36: Sets Fixed Call Forward to VM [DN] per customer requirements.
©Program 37: Sets the transfer recall timer for the VM ports...

Peripheral Installation
PC/Data Communications Interface Units
Strata DK I&M    5/9910-47
Peripheral Installation
PC/Data Communications Interface Units
The Strata DK supports two types of Data Interface Units (DIUs) that enable digital telephone 
users to simultaneously transmit and receive data on the same digital station port and wire pair 
while communicating on a voice call.
One unit, called the integrated DIU (RCPI-DI, PDIU-DI/PDIU-DI2), becomes part of the digital 
telephone, replacing the...

Peripheral Installation
PC/Data Communications Interface Units
10-48Strata DK I&M    5/99
RPCI-DI Dual Mode
RPCI-DI can operate in the data communication or Telephone Application Program Interface 
(TAPI) mode.
©When in the Data Command mode, send the HEX (fØ), enter ALT (Hold) + 240 to the RPCI to 
switch it to the Data Communications mode. (Unplugging the telephone cord and then 
reconnecting it also resets the RPCI to the Data Communications mode.)
©When in the TAPI mode, send (ATCØ) to the RPCI to...