Toshiba Strata Dk Cordless Digital Telephone User Guide

							Configuration25
Configuration3
You can configure three items in your cordless digital telephone that affect the way it works 
with the Strata DK business telephone system. These are:
The above three settings default to the ON state.
Your cordless digital telephone can operate in either the DKT or the cordless mode and can be 
programmed whenever the telephone is idle. When entering the program mode during cordless 
operation, all calls coming to this station are ringback tone until the program mode is ended. 
Entering the program mode during DKT operation has no effect on current call status. 
SOFT KEY
)(On) causes the deskset to turn on the soft keys 
whenever the mode is changed from cordless to DKT.
)
 (Off) causes the deskset to turn off the soft keys 
whenever the mode is changed from cordless to DKT.
SOFT KEY LOCK (MODE 
70/71))(On)
 allows the Soft Key Mode 70/71 (Soft key Off/On) 
function to pass from the deskset to the Strata DK for 
controlling the soft key mode.
Do not use this 
) (On) setting unless you have Release 
3 of Strata DK280. Use with older systems may cause a 
system malfunction. Use 
) (Off).
)
 (Off) locks the Soft Key (Mode 70/71) function from 
passing from the deskset to the Strata DK.
RCV LEVEL
)(On)
 sets the receive level to normal level.
)(Off)
 sets the receive level to 4-dB level (lower 
volume). 
						

							Entering Program Mode–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
26Strata DK Cordless Digital Telephone 5/99
Entering Program Mode
äTo enter the program mode
1. Remove the handset from the 
base unit.
2. Press and hold
 * and  at the 
same time.
3. While holding 
* and , press 
7$ / ..
4. Release all three keys.
1178
1178b 
						

							–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Entering Program Mode
Configuration27
5. Press the 592/ button on 
the upper right side of the 
cordless handset until you 
toggle to the DATA STORE 
settings screen.
6. Press 
 to toggle the settings 
for each program step or store 
(save) the setting when in 
DATA STORE step.
7. Press 
7$ / . at any time to 
exit PROGRAM without 
saving changes. To save the 
changes step to DATA 
STORE and press 
 before 
pressing 
7$ / ..
8. Press  
087( to step through 
the program steps in the 
reverse order.
The LEDs above the 
)~)
buttons indicate the current 
setting for each of the program 
steps. Each time the feature is 
entered and digit 
 is pressed 
these LEDs change their 
indication.You see the following screens on the cordless LCD 
prompting you to configure your handset:
PROGRAM
SOFT KEY
ON MODE
SOFT KEY
OFF MODE
PASS
MODE 70/71
REJECT
MODE 70/71
RCV. LEVEL
NORMAL
RCV. LEVEL
-4 DB
TALK-QUIT
0-STORE
DATA STORE
TALK-QUIT 
R/VOL
F1
ON
F1
OFF
F2
ON
F2
OFF
F3
ON
F3
OFFR/VOL MUTE
TALKR/VOL MUTE
R/VOL MUTE0
0
0
0
1179 
						

							Entering Program Mode–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
28Strata DK Cordless Digital Telephone 5/99 
						

							The Handset29
The Handset4
Handset Controls
Handset Volume Level
äPress the
 592/ button on the side of the handset 
while on a call to select a loud or soft volume level.
Ringer Volume Level 
äWhile the telephone is idle, press the 592/ button on 
the side of the handset to select ring volume. When the 
handset is returned to the base, the ring volume 
automatically switches to RING HIGH.
NoteWhen the display is set for RING OFF, you receive 
a vibration alert instead of the audible ring tone.
R/VOL
MUTE
1161
1180
RING HIGH
RING LOW
RING OFF
R/VOL
R/VOLR/VOL 
						

							Using the Handset–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
30Strata DK Cordless Digital Telephone 5/99
Mute
äPress and hold the 087( button to consult another person in the room without the caller 
hearing you. Release the 
087( button to continue the conversation.
Using the Handset
äPick up the handset and press 
7$ / ..You may see:
When the cordless digital 
telephone communicates 
between the base unit and 
the handset, the screen 
goes to standby, and the 
telephone is ready to use.
When talking and the 
handset is at the range 
limit of your cordless 
digital telephone, you may 
see:
Take the following action:
äDuring a call, move back in 
range within 20 seconds.
äIn standby mode, move back 
within range.
When the display indicates 
DKT MODE, the telephone 
was not transferred to 
cordless mode at the base.
AQUIRING
LINK
1186
1187
NO SERVICE
1188
DKT MODE
1189 
						

							–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Charging the Handset
The Handset31
Charging the Handset
For more information see Page 21.
äTo charge your handset
äPlace the handset on the base unit either face down or face up, with or without the belt clip 
attached. (The battery pack in the handset automatically recharges in either position.) 
						

							Switching a Call to Your Cordless Digital Telephone–––––––––––––––––––––––––––––––––––––––––––––––––––
32Strata DK Cordless Digital Telephone 5/99
Switching a Call to Your Cordless Digital Telephone
You can switch a call from the deskset to the cordless digital telephone or vice versa whether 
idle or talking.
NoteTransferring while idle or when calls are on hold results in a steady light (skipping the 
flashing state).
äTo transfer an active call 
1. Press 
&25/(66 on the 
base unit.The CORDLESS 
LED flashes.
2. Pick up the handset and press 
7$ / ..The CORDLESS LED lights steady. The DKT LEDs 
go out and LCD display shows CORDLESS MODE.
3. When you finish the call, 
place the handset back on the 
base unit to automatically 
hang up.If the telephones are idle, the transfer takes place 
immediately without the need to pick up the handset.
1190
1245c 
						

							–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Switching a Call to the Desk Telephone
The Handset33
Switching a Call to the Desk Telephone
NoteIf the cordless AC Adapter is unplugged or if the Strata DK system is turned off, the 
mode automatically changes to the CORDLESS mode. 1. Press 
(6. on the base unit. The DESKLED 
flashes.
2. Pick up the handset on your 
desk telephone.The DESK LED lights steady.
3. Hang up your cordless digital 
telephone handset.
1246
1
TALKMSG HOLD
Cnf
TrnDIAL
4
7
F1 F2 F3
F4
2
5
8
03
6
9
#
ABC DEF
GHI
PRSJKL
TUV
OPERMNO
WXY
F2 F4F3
F1
1685
Cordless Digital Telephone with Digital Telephone  
						

							Using Memory–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
34Strata DK Cordless Digital Telephone 5/99
Using Memory
äTo store a number
NoteAfter pressing 0HPLDO the second time, you have 20 seconds to enter the memory 
location number you wish to use. Otherwise, an error tone sounds and the unit returns 
to standby.
äTo erase a stored number1. Remove the handset from the 
base unit.
2. Press 
0HPLDO.  You hear a beep and see:
3. Enter the number (up to 16 
digits) you want to store.
4. Press 
0HPLDO.  You see:
5. Enter the number (01~20) for 
the memory location you 
want to use.You hear a confirmation beep and see the message. 
The telephone then returns to standby.
1. Remove the handset from the 
base unit.You see:
PHONE#—
1181
MEMORY#—
1182
STORED
1183