Toshiba L350 Manual
Have a look at the manual Toshiba L350 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
GMAD00163010 01/08 If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Something Goes Wrong” on page 146 in this guide. Satellite ® L350 Series User’s Guide
2 5.375 x 8.375 ver 2.3 Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling . Model: Satellite® L350 Series Recordable and/or ReWritable Drive(s) and Associated Software Warranty The computer system you purchased may include Recordable and/or ReWritable optical media drive(s) an d associated software, among the most advanced data storage technologies avai lable. As with any new technology, you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed or provided electronically. If you fail to do so, this product may not functi on properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY THEREOF. Protection of Stored Data For your important data, please make peri odic back-up copies of all the data stored on the hard disk or other storag e devices as a precaution against possible failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. WHEN COPYING OR TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED. TOSHIBA DISCLA IMS ANY LIABILITY FOR THE FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY .
3 5.375 x 8.375 ver 2.3 Critical Applications The computer you have purchased is not designed for any “critical applications.” “Critical applications” means life s upport systems, medical applications, connections to implanted medical devi ces, commercial transportation, nuclear facilities or systems or any other applicatio ns where product failure could lead to injury to persons or loss of lif e or catastrophic property damage. ACCORDINGLY, TOSHIBA, ITS AFFILIATES AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE. FCC Notice “Declaration of Conformity Information” This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of th e FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can ra diate radio frequency energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. Ho wever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the eq uipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ❖Reorient or relocate the receiving antenna. ❖Increase the separation between the equipment and receiver. ❖Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. ❖Consult the dealer or an experien ced radio/TV technician for help. Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncomplia nt peripherals or peripherals not recommended by Toshiba is lik ely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computers parallel port, monitor po rt, USB port, PS/2 port ®, i.LINK® port, HDMI out port and microphone jack (Port availability depe nds on model selected). Changes or modifications made to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the users authority to operate the equipment. NOTE
4 5.375 x 8.375 ver 2.3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ❖This device may not cause harmful interference. ❖This device must accept any interferen ce received, including interference that may cause undesired operation. Contact either: ❖Toshiba’s Support Web site at pcsupport.toshiba.com. ❖Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada. FCC requirements The following information is pursuant to FCC CFR 47, Part 68 and refers to internal modems. This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN ) for this equipment. If requested, the information must be provided to the telephone company. The modem connects to the telephone line by means of a standard jack called the USOC RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with th e applicable FCC part 68 rules and requirements adopted by the ACTA. It is designed to be connected to a compatible modular jack th at is also compliant. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a tele phone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determin ed by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represente d by the ## are the REN without a decimal point (e.g., 03 is a REN of 0. 3). For earlier products, the REN is separately shown on the label.
5 5.375 x 8.375 ver 2.3 Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service co mmission or corporation commission for information. Telephone Company Procedures The goal of the telephone company is to provide you with the best service it can. In order to do this, it may occasionally be necessary for them to make changes in their equipment, operations or procedur es. If these changes might affect your service or the operation of your equipmen t, the telephone company will give you notice, in writing, to allow you to ma ke any changes necessary to maintain uninterrupted service. If Problems Arise If this equipment causes harm to the te lephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advanced notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. If trouble is experienced with this eq uipment, for repair or limited warranty information, please contact Toshiba Corp oration, Toshiba America Information Systems, Inc. or an author ized representative of Tosh iba, or the Toshiba Support Centre within the United Stat es at (800) 457-7777 or Outside the United States at (949) 859-4273. If the equipment is causing harm to the telephone network, the telephone company may request that y ou disconnect the equipment until the problem is resolved. Disconnection If you should ever decide to perman ently disconnect your modem from its present line, please call the telephone company and let them know of this change. Fax Branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other elect ronic device, including Fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and th e telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distan ce transmission charges.) In order to program this in formation into your fax transmission, refer to the fax software instructions installed on this computer.
6 5.375 x 8.375 ver 2.3 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions abou t what will disable alarm equipment, consult your telephone compan y or a qualified installer. Instructions for IC CS-03 Certified Equipment 1NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network prot ective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirement s document(s). The Department does not guarantee the equipment will opera te to the user’s satisfaction. Before installing this equipment, users s hould ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed usin g an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipmen t malfunctions, may give the telecommunications company cause to re quest the user to disconnect the equipment. Users should ensure for their own pr otection that the electrical ground connections of the power utility, teleph one lines and internal metallic water pipe system, if present, are connect ed together. This precaution may be particularly importa nt in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. 2 The user manual of analog equipmen t must contain the equipment’s Ringer Equivalence Number (REN) a nd an explanation notice similar to the following: The Ringer Equivalence Number (REN) of this device can be found on the label affixed to your computer. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any comb ination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. 3 The standard connecting arrangemen t (telephone jack type) for this equipment is jack t ype(s): USOC RJ11C.
7 5.375 x 8.375 ver 2.3 Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined and approved by the Institute of El ectrical and Electronics Engineers. ❖The Wireless Fidelity (Wi-Fi®) certification as defined by the Wi-Fi Alliance. The “Wi-Fi CERTIFIED” logo is a cer tification mark of the Wi-Fi Alliance. Bluetooth® and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network perfor mance or even lose your network connection. If you should exper ience any such problem, immediately turn off your Bluetooth or Wireless LAN device. Please contact Toshiba computer product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information. Radio Frequency Interference Requirements This device is restricted to indoor use due to its op eration in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as prim ary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz band s. These radar stations can cause interference with and/or damage this device. Wireless LAN and Your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the elect romagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate w ithin the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. Thes e standards and recommendations reflect the consensus of the scientif ic community and result from deliberations of panels and committees of scientists who continua lly review and interpret the extensive research literature.
8 5.375 x 8.375 ver 2.3 In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization. These situatio ns may for example include: ❖Using the Wireless LAN equipment on board airplanes, or ❖In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the us e of wireless devices in a specific organization or environment (e.g. ai rports), you are encouraged to ask for authorization to use the Wireless LAN de vice prior to turning on the equipment. Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency ex posure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card sha ll be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s inst ructions as described in the user documentation that comes with the pr oduct. This device complies with the following radio frequency and safety standards. Canada – Indust ry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment mu st ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consu lt Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device shall not be co-located with any other transmitter that has not been tested with this device. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause unde sired operation of this device. L’ utilisation de ce dispositif est soumis aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même s’il est susceptible de compromettre son fonctionnement.
9 5.375 x 8.375 ver 2.3 The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met. To prevent radio interference to the licensed service, this device is intended to be operated indoors an d away from windows to pr ovide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empecher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit etre utilize a l’interieu r et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d’emission) est installe a l’exterieu r, il doit faire l’objet d’une licence. This device is restricted to indoor use due to its op eration in the 5.15 GHz to 5.25 GHz frequency range. Industry Canada requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-cha nnel Mobile Satellite systems. High power radars are allocated as prim ary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. The above Caution information applies to produc ts that operate with an 802.11a device. EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: This product is carrying the CE-Mark in accordance w ith the related European Directives. The party responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. Supplementary Information: *The product complies with the requirements of the Low Voltage Directive 73/23/EEC, the EMC Directive 89/336/EEC and/or the R&TTE Directive 1999/5/EC. NOTE
10 5.375 x 8.375 ver 2.3 VCCI Class B Information Modem Warning Notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on ever y PSTN network termination point. In the event of problems, y ou should contact your equi pment supplier in the first instance. Ta i w a n The legal communications mentioned in the above item refer to radio communications operated in accordan ce with telecommunication laws and regulations. Low power radio frequency electric machinery shall resist against interference from legal communications or from indu strial, scientific and medical radio emission electric machinery. Using this Equipment in Japan In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communicatio n systems such as this equipment Article 14 Unless approved, for any mo del accredited low power radio frequency electric machinery, any company, trad er or user shall not change the frequency, increase the power or change the features and functions of the original design. Article 17 Any use of low power radio frequ ency electric machinery shall not affect aviation safety and interfere with legal communications. In the event interference is caused, the use of such electric machinery shall be immediately discontinued. Operation of such products can be resumed only when they are modified and can no longer cause interference.