Toshiba E Studio 200S User Manual

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 A Re
 Stapler \(KK-1600\)
 Job separ Offset tr
 A
 Stac
 P
 P
e-STUDIO16
e-STUDIO20/25
 Stapler \(KK-1600\)
 A
\(MD-0101\)
 Stac
\(MY
 A
 Re
 Finisher including 
br
\(e-STUDIO20/25 only\)
 P
Large Capacity F
 \(KD-1010\)**
\(e-STUDIO20/25 only\)
*
*
Furoption f\) can be installed in KD-
1009.
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Control Panel
IMAGE MODE
Y
selected image mode illuminates...

4-1
1
2
3
4
5
6
7
9
10
11
128
4. EDIT MENU
1. DUPLEX COPYING ........................................................................................................ 4-2
 1-Sided Originals > 1-Sided Copies (default setting) ................................................ 4-3
 1-Sided Originals > 2-Sided Copies .......................................................................... 4-4
 2-Sided Originals > 2-Sided Copies .......................................................................... 4-8...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

4-3
1
2
3
4
5
6
7
9
10
11
128
 1-Sided Originals > 1-Sided Copies (default setting)
This copy mode is selected as the default setting when the copier is turned on. To change use the
following procedures.
1
Press the  key on the control panel while in the
initial screen for copying.
 The “EDIT MENU” screen appears.
3
Select “1>1” by pressing the  key.
Then press the 
 key. Press the  key to return
to the initial screen for copying.
Tip
The menu that appears here varies depending on whether
the...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

4-5
1
2
3
4
5
6
7
9
10
11
128How to place originals
 When placing originals vertically:
Align the edges of the originals and set them all in the same
direction (top to bottom).
 When placing originals horizontally:
Arrange the originals so that the odd and even pages are
placed alternately in opposite directions, and then set them in
the automatic document feeder (optional) or the reversing au-
tomatic document feeder (optional).
5
4
3
2
1
5
4
3
2
1
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
Downloaded...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

4-7
1
2
3
4
5
6
7
9
10
11
128
How to place originals on the glass
When setting originals vertically:
The first side and second side should be placed in the same
direction (top to bottom).
When setting originals horizontally:
The first side and second side should be placed in the oppo-
site direction (top to bottom).
Vertical placement
(First side) (Second side)
Horizontal placement
(First side) (Second side)
9
Repeat steps 5 to 8 until all the originals are copied.
10
After the last original is...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

4-9
1
2
3
4
5
6
7
9
10
11
128
9
7
5
3
1
Note
This copying mode requires the reversing automatic document feeder (optional) to be installed.
1
Press the  key on the control panel while in the
initial screen for copying.  The “EDIT MENU” screen
appears.
2
Confirm that “DUPLEX” is highlighted on the screen.
Then press the 
 key.
3
Select “2 > 1” by pressing the  key.
Then press the 
 key. Press the  key to return
to the initial screen for copying.
4
Select the desired paper cassette, reproduction ratio,...