Toshiba E Studio 200S User Manual

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

3-7
1
2
3
4
5
6
7
9
10
11
128
Bypass Copying by Specifying the Copy Size
By specifying the copy size in bypass copying, you can select the following copying modes:
 Duplex copying  Dual-page copying  Sort copying  Offset
 Magazine sort  2-in-1/4-in-1  Alternation
1
Place sheets of copy paper on the stack feed bypass.
2
Select the desired copy size.
 Use the  or  key to select the copy size.
Make sure that the desired copy size and its direction
are displayed. Then press the 
 key.
3
Select the...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

3-9
1
2
3
4
5
6
7
9
10
11
128
5
Place the original(s) on the original feed tray or the
glass.
6
Select the desired image density and copy quantity.
7
Press the  key.
 If the following messages are shown;
Change the direction of original(s).
2
Select “AMS” by using the  key.
3
Press the  key to accept the “AMS”.
4
 Then select the paper cassette.
 ( Manual Paper Selection 
 Page 3-3).
READY 1
ZOOM: 100%
AMS
REDUCE/ENLARGE
READY 1
PAPER :
 A4 :AUTO
FINISHING :SORT ZOOM :AMS
 EDIT
Change direction of org....

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

3-11
1
2
3
4
5
6
7
9
10
11
128Zoom Up/Down
1
Select the paper cassette.
(Manual Paper Selection 
 Page 3-3.)
2
Press the  key or  key.
 Press the  key and go to step 3,
or press the 
 key and go to step 4.
3
Use the  or  keys and select “ZOOM UP/
DOWN.”  Press the 
 key.
4
Select the desired reproduction ratio using the 
or  key.  Then press the  key.
 For enlargement, use  key. For reduction, use 
key.
 Each time you press 
 or  key, the reproduction
ratio changes by 1%. Holding down the key changes...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

3-13
1
2
3
4
5
6
7
9
10
11
128
3. COPYING WITH COPY DENSITY SELECTION
There are two types of image density: automatic mode and manual mode.
In the automatic mode, the copier automatically detects the density of the original and selects the optimum
image density for it.
In the manual mode, the user can produce lighter or darker copies.
Copying in the Automatic Mode
1
Make sure that “  : AUTO” is displayed in the
message display.
If “ , ”  “NORMAL” or “  ” is displayed, press the  key
and select “AU TO”....

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

3-15
1
2
3
4
5
6
7
9
10
11
128
4. ORIGINAL IMAGE QUALITY SELECTION
You can select the copy mode (Text, Text/Photo, and Photo) and produce clear copies matched to the
type of original. The text mode is suitable for making copies of originals containing text, or text and line
artwork. The Photo mode is suitable for making copies of originals containing black-and-white photos,
color photos or halftone photos. The Text/Photo mode is selected as the default mode. This mode is used
for making copies of regular...