Toshiba E Studio 200S User Manual

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

1-9
1
2
3
4
5
6
7
9
10
11
1285
Push the left (lock) side to lock the size selection
lever.
Tip
Changing the paper size of the cassette alone does not change
the cassette size indication on the display. To change the cassette
size, perform cassette size setting on the Message Display Panel.
  Page 1-11
7
Install the cassette into the copier.
6
Place paper in the cassette.
 Up to 550 sheets of paper (60 mm) (recommended by
Toshiba) can be set.
 Do not add paper above the line indicated on the guide.
 Do...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

1-11
1
2
3
4
5
6
7
9
10
11
128
Cassette Size Setting
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
1
Press the  key to enter the program menu.
2
Select 01.DEFAULT SETTINGS and press the 
key.
Enter the paper size loaded in each paper cassette in the copier.  When the size of the paper loaded in
a cassette is changed (
Page 1-8), please reset the cassette size before making a copy. A paper jam
indication may result if the wrong paper size is selected.
3
Select 01.MACHINE DEFAULTS and press the...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

1-13
1
2
3
4
5
6
7
9
10
11
128
4. DEPARTMENT CODES
If the copier is set up so that department codes can be used, you can make copies only after entering a
pre-assigned department code.
1
When the department control function is in use, the
screen shown on the right appears immediately after
the power switch is turned on.
2
Enter the 5-digit department code, and press  key.
 The department code is shown with asterisks (*****).  When
a correct department code is entered, the following message
appears.
3...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

2-1
1
2
3
4
5
6
7
9
10
11
128
2. HOW TO MAKE COPIES
1. GENERAL COPYING PROCEDURE ............................................................................. 2-2
2. SETTING ORIGINALS ................................................................................................... 2-4
Originals ......................................................................................................................... 2-4
Placing the Original on the Glass...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

2-3
1
2
3
4
5
6
7
9
10
11
1282
Set the desired copy modes.
 The automatic paper selection (APS) mode, automatic image
density mode and copying of one original are the default
settings.
3
Press the  key.
 The message “COPYING” appears.  The copier starts
copying.  After completion of the copying, the message
“READY” appears again.
 For the e-STUDIO16, when an original is scanned from
the glass, a message appears prompting you to specify
the size of the original that you would like to copy.
Use the 
 or...