Toshiba E Studio 200S User Manual

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

4-11
1
2
3
4
5
6
7
9
10
11
128
10
Select Edge Erase, if necessary.
 Page 4-14
11
Select the desired image density, reproduction ratio
and copy quantity.
12
Place the original on the glass and press the 
key.
The copy of page 1 will be ejected with its reverse side blank.
The copies of page 2 and subsequent pages will temporarily
be stacked inside the copier.
Place page 1 of the original first.
13
Set the next original.
Turn the page of the book and set it in the same way as
previously.
Select “YES”...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

4-13
1
2
3
4
5
6
7
9
10
11
128
3. IMAGE SHIFT COPYING
You can create margins on the copy and specify the position of these margins on either the right or the
left side of the copy. You can also create margins on copies of book originals using DUAL PAGE mode.
 Page 4-12.
The default margins is approximately 7 mm, but you can select any margin between 4 and 15 mm.
Example of Image Shift Copying
1
Press the  key on the control panel while in the
initial screen for copying.  The “EDIT MENU” screen
appears....

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
 Stapler (KK-1600)
 Job separator (MJ-5001) Offset tray (MJ-5002)
 Automatic duplexing unit (MD-0101)
 Stack feed bypass (MY-1016)
 Paper feed unit (MY-1015)
 Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
 Stapler (KK-1600)
 Automatic duplexing unit
(MD-0101)
 Stack feed bypass
(MY-1016)
 Automatic document feeder (MR-2012)...

4-15
1
2
3
4
5
6
7
9
10
11
128
5. 2-IN-1/4-IN-1
This function allows you to reduce and copy two or more originals onto a single sheet. Reducing four
sheets at a time onto a single sheet is called “4-in-1” copying.
Duplex copying of 4-in-1 allows 8 pages to be copied on one sheet.
* The reversing automatic document feeder (optional) is required to scan a double-sided original.
* The automatic duplexing unit (optional) is required for duplex copying.
* Reduction/enlargement copying is not available with...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 A Re
 Stapler \(KK-1600\)
 Job separ Offset tr
 A
 Stac
 P
 P
e-STUDIO16
e-STUDIO20/25
 Stapler \(KK-1600\)
 A
\(MD-0101\)
 Stac
\(MY
 A
 Re
 Finisher including 
br
\(e-STUDIO20/25 only\)
 P
Large Capacity F
 \(KD-1010\)**
\(e-STUDIO20/25 only\)
*
*
Furoption f\) can be installed in KD-
1009.
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Control Panel
IMAGE MODE
Y
selected image mode illuminates...

4-17
1
2
3
4
5
6
7
9
10
11
128
When Placing the Original on the Glass
1
Follow step 2 to 8 of “When Using The Automatic
Document Feeder.”  
 Page 4-15
Next Original? 3
YES
NO
Next Original? 3
YES
NO
Memory clear? 3
YES
NO
2
Place the original on the glass and press the 
key.
For the e-STUDIO16, a message appears prompting you to
specify the size of the original that you would like to copy.
Use the 
 or  key to specify the size of the original.
Then press the 
 key. The copier will start scanning the...

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 A Re
 Stapler \(KK-1600\)
 Job separ Offset tr
 A
 Stac
 P
 P
e-STUDIO16
e-STUDIO20/25
 Stapler \(KK-1600\)
 A
\(MD-0101\)
 Stac
\(MY
 A
 Re
 Finisher including 
br
\(e-STUDIO20/25 only\)
 P
Large Capacity F
 \(KD-1010\)**
\(e-STUDIO20/25 only\)
*
*
Furoption f\) can be installed in KD-
1009.
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Control Panel
IMAGE MODE
Y
selected image mode illuminates...

4-19
1
2
3
4
5
6
7
9
10
11
128
7
Place the originals on the feed tray and press the
 key.
When Placing the Original on the Glass
7
Place the original on the glass and press the 
key.
8
Select “YES,” set the next original and press the 
key.
Next Original? 3
YES
NO
Memory clear? 3
YES
NOWhile the “Next Original?” screen is being shown, if the
 key is pressed, the scanned data is deleted and
MAGAZINE SORT is terminated. Select “YES” or “NO” and
press the 
 key. For the e-STUDIO16, a message appears...