Toshiba E Studio 200S User Manual
Have a look at the manual Toshiba E Studio 200S User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1 2 3 4 5 6 7 9 10 11 128 1-2BEFORE MAKING COPIES 1. DESCRIPTION OF THE OPTIONAL EQUIPMENT A Re Stapler \(KK-1600\) Job separ Offset tr A Stac P P e-STUDIO16 e-STUDIO20/25 Stapler \(KK-1600\) A \(MD-0101\) Stac \(MY A Re Finisher including br \(e-STUDIO20/25 only\) P Large Capacity F \(KD-1010\)** \(e-STUDIO20/25 only\) * * Furoption f\) can be installed in KD- 1009. Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Control Panel IMAGE MODE Y selected image mode illuminates Message Display Panel Displa g LIGHT/DARK Use this k PAPER SUPPLY Y ZOOM Y FINISHING Y COPY Press this k in the COPY mode in detail. Paper Jam Lamp This lamp b Recording Paper Lamp This lamp b Toner Lamp This lamp illuminates when the toner is about to r PC Communication Lamp This lamp is not used in the COPY mode This lamp b in the PRINTER mode FAX Communication Lamp This lamp is not used in the COPY mode This lamp b 2. DESCRIPTION OF THE DIGITAL COPIER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES When the po the copier is controlled using the depar P The Message Displa settings using br Message Display Panel 2. DESCRIPTION OF THE DIGITAL COPIER (Cont.) Message Light/Dar Zoom P selected paper source Finishing READY PAPER A4 :AUTO FINISHING EDIT Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Changing the Paper Size of the Cassette The paper siz procedure 3 Push the right (unlock) side of the size selection lever to unlock it. 4 While pushing the size selection lever in the direction of the arrow, set the side guide to the desired paper width (as indicated on the bottom surface of the cassette). 2 Move the width guide to the desired paper size position (as indicated on the bottom surface of the cassette). 1 Pull the cassette out until it stops. 3. PAPER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES 3. PAPER (Cont.) Turning ON the Power Switch / Auto Job Start Turning On the Power Switch 2 The “Ready” message appears. Auto Job Start READY PAPER :AUTO FINISHING EDIT While the copier is w select the desired cop key W When the machine reaches its proper oper cop Tip E k the cop auto job star key 1 Open the power switch cover and turn ON the switch. the basic screen : Please w W Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES 7 Repeat steps 4 to 6 to specify the paper size for other paper cassettes, as necessary. 8 Press the key to return to the initial screen for copying. 3. PAPER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Downloaded From ManualsPrinter.com Manuals HO 1. GENERAL COPYING PROCEDURE When or k the initial \(def copies to be made 1 Place originals.
4-1 1 2 3 4 5 6 7 9 10 11 128 4. EDIT MENU 1. DUPLEX COPYING ........................................................................................................ 4-2 1-Sided Originals > 1-Sided Copies (default setting) ................................................ 4-3 1-Sided Originals > 2-Sided Copies .......................................................................... 4-4 2-Sided Originals > 2-Sided Copies .......................................................................... 4-8 2-Sided Originals > 1-Sided Copies .......................................................................... 4-9 Book-Type Originals > 2-Sided Copies ................................................................... 4-10 2. DUAL PAGE COPYING ................................................................................................ 4-12 3. IMAGE SHIFT COPYING ............................................................................................. 4-13 4. EDGE ERASE COPYING ............................................................................................. 4-14 5. 2-IN-1/4-IN-1 ................................................................................................................4-15 6. MAGAZINE SORT ........................................................................................................ 4-18 7. ANNOTATION............................................................................................................... 4-21 8. EDITING ....................................................................................................................... 4-23 Mirror Image ................................................................................................................. 4-23 Negative/Positive Reversal .......................................................................................... 4-24 9. JOB BUILD ................................................................................................................... 4-25 10. COPYING MIXED SIZE ORIGINALS ........................................................................... 4-26 11. JOB MEMORY .............................................................................................................. 4-27 12. PAPER TYPE ............................................................................................................... 4-29 13. MENU LIST .................................................................................................................. 4-30 Downloaded From ManualsPrinter.com Manuals
1 2 3 4 5 6 7 9 10 11 128 1-2BEFORE MAKING COPIES 1. DESCRIPTION OF THE OPTIONAL EQUIPMENT Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011) Stapler (KK-1600) Job separator (MJ-5001) Offset tray (MJ-5002) Automatic duplexing unit (MD-0101) Stack feed bypass (MY-1016) Paper feed unit (MY-1015) Paper feed pedestal (KD-1009) e-STUDIO16 e-STUDIO20/25 Stapler (KK-1600) Automatic duplexing unit (MD-0101) Stack feed bypass (MY-1016) Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011) Finisher including Transportation bridge (MJ-1011)* (e-STUDIO20/25 only) Paper feed unit (MY-1015) Large Capacity Feeder (KD-1010)** (e-STUDIO20/25 only) * The Job separator (MJ-5001) or Offset tray (MJ-5002) can be installed in place of the Finisher. ** The Paper feed pedestal (KD-1009) can be installed in place of the Large capacity feeder (KD-1010). Furthermore, the Cassette module (MY-1017) (option for e-STUDIO20/25) can be installed in KD- 1009. Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Control Panel IMAGE MODE You can switch between the image modes (Text, Text/Photo and Photo) for copying. The lamp of the currently selected image mode illuminates. Message Display Panel Displays the copier conditions, operating procedures, and various instructions and information to the user in text and graphics. LIGHT/DARK Use this key when making a copy to specify the copy density. PAPER SUPPLY You can specify from which paper cassette you would like to feed paper for making a copy. ZOOM You can specify the scaling factor for copying. FINISHING You can specify how you would like to output copies (including Sort and Offset). COPY Press this key to switch from the other modes to the COPY mode. This manual describes the settings and operation in the COPY mode in detail. Paper Jam Lamp This lamp blinks when an original or copy paper is jammed. Recording Paper Lamp This lamp blinks in the COPY mode when no paper is loaded in the selected paper cassette. Toner Lamp This lamp illuminates when the toner is about to run out or runs out completely. PC Communication Lamp This lamp is not used in the COPY mode. This lamp blinks while the copier is serving as a printer and communicating with your computer, while it is printing out in the PRINTER mode, or while it is communicating as a local scanner. FAX Communication Lamp This lamp is not used in the COPY mode. This lamp blinks while the copier is communicating in the FAX mode. 2. DESCRIPTION OF THE DIGITAL COPIER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES When the power is turned on, the following basic screen is shown on the Message Display Panel. (When the copier is controlled using the department code, a different screen is display. Page 1-13) The Message Display Panel indicates the copier’s status. It also illustrates operational procedures or settings using brief sentences or icons. Message Display Panel 2. DESCRIPTION OF THE DIGITAL COPIER (Cont.) Message Copy quantity Light/Dark Zoom Paper size of the currently selected paper source Finishing READY PAPER A4 :AUTO FINISHING EDIT Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Changing the Paper Size of the Cassette The paper size of the copier’s cassettes can be changed to appropriate paper sizes using the following procedure. 3 Push the right (unlock) side of the size selection lever to unlock it. 4 While pushing the size selection lever in the direction of the arrow, set the side guide to the desired paper width (as indicated on the bottom surface of the cassette). 2 Move the width guide to the desired paper size position (as indicated on the bottom surface of the cassette). 1 Pull the cassette out until it stops. 3. PAPER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES 3. PAPER (Cont.) Turning ON the Power Switch / Auto Job Start Turning On the Power Switch 2 The “Ready” message appears. This message indicates that the copier is ready for operation. Auto Job Start READY PAPER :AUTO FINISHING EDIT While the copier is warming up, place the original on the glass, select the desired copy modes and press the key. Wait warming up:Auto Start When the machine reaches its proper operating temperature, copying will automatically star t. Tip Even after you have pressed the key, you can change the copy modes if copying has not yet started. To cancel the auto job start mode, press the key. 1 Open the power switch cover and turn ON the switch. This message appears on the message display panel of the basic screen : Please wait Wait warming up Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES 7 Repeat steps 4 to 6 to specify the paper size for other paper cassettes, as necessary. 8 Press the key to return to the initial screen for copying. 3. PAPER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 1. GENERAL COPYING PROCEDURE When originals are set and the key is pressed with all settings unchanged, copies are made using the initial (default) settings (*1). By selecting various copy modes, you can alter the number and type of copies to be made. 1 Place originals. When placing an original on the glass: Page 2-5 When placing originals facing up in the automatic document feeder (optional) or the reversing automatic document feeder (optional): Page 2-6 The initial (default) settings of the copier at the time of installation are as shown on the right. You can change these initial settings. Page 5-18 *1 The copy modes that are automatically set when the power is turned on or when the key is pressed on the control panel are called the initial (default) settings. Copying Procedure Reproduction ratio ........... 100% Copy quantity ................... 1 Automatic paper selection 1-side copies from 1-side originals Automatic image density Text/photo mode Non-sort mode Initial settings Original scale Original Slide Automatic document feeder Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 2. SETTING ORIGINALS Originals The following specifications apply to originals that can be used with this copier: Remarks Do not place any heavy object (4 kg or over) on the glass. Some of the originals on the left may not be used depending on type or thickness. (For details, consult your service technician.) Some of the originals on the left may not be used depending on paper quality. Maximum number that can be set 50 originals (50 to 80 g/m 2) or stacked height of originals 8 mm or less 100 originals (50 to 80 g/m 2) or stacked height of originals 16 mm or less Size capable of automatic detection Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 (for e-STUDIO20/ 25 only) Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 Types of original Sheets Three-dimensional objects Books Plain paper, thermal paper (for word processor or fax), long originals, originals with filing holes (2-, 3- and 4- holes): 50 to 105 g/m 2 (Multi-sheet feeding) 50 to 127 g/m 2 (1-sheet feeding) Plain paper, thermal paper (for word processor or fax), long originals, originals with filing holes (2-, 3- and 4- holes): 50 to 127 g/m 2 (1-sided original) 50 to 105 g/m 2 (2-sided original) Setting place Glass Automatic document feeder (optional) Reversing automatic document feeder (optional) Maximumsize Width : 302 mm Length : 432 mm Width : 297 mm Length : 432 mm Width : 297 mm Length : 432 mm Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES Using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (option) 2. SETTING ORIGINALS (Cont.) 1 After aligning the edges of the originals well, place them on the original feed tray facing up and align the slides to the width of the originals. Slide Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 3. INTERRUPT COPYING The interrupt copy is a convenient feature that allows the user to pause a job that is currently in progress. 1 Press the key. This message appears: Job interrupted The key illuminates during the INTERRUPT copying. Note One interrupt copy can be made from multiple originals by placing them on the glass one at a time. 2 Place the original. If the previous original remains on the glass, open the original cover or automatic document feeder (optional) or the reversing automatic document feeder (optional) and replace it with the original to be interrupt-copied. 3 Press the key. Repeat steps 2 to 4 if you need to interrupt copying again. 4 After interrupt copying is finished, press the key again. When the following is shown on the Message Display, press the key and perform the interrupted jobs. Ready to resume job. Ready to resume job PAPER FINISHING EDIT Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION Automatic Paper Selection (APS) When the power switch is turned ON, the Automatic Paper Selection (APS) mode is selected as the default mode. In this mode, when a regular-sized original is loaded for copying, the copier detects the original size automatically and selects a same paper size as the original size. For the e-STUDIO16, when the original is placed on the glass for copying, the copier cannot detect its size automatically. A message appears prompting the user to specify the size of the original. * This mode can only be used for actual-size (100%) copying. * For automatically selectable original sizes: Page 2-4 1 Check that APS mode is selected in the upper left portion of the Message Display. 4 Enter the desired copy quantity using numeric keys. A copy quantity up to 999 can be keyed in. The copy quantity default is set at one. When an incorrect quantity is set, press the key and key in the correct number. If you press the key, all current copier settings will be cleared, and returned to the default settings. 3 Select desired copy mode. 2 Place the original(s) on the original feed tray or on the glass. READY PAPER :AUTO FINISHING EDIT 5 Press the key. If the following messages are shown; Change the direction of original(s). Change direction of original. Load the cassette containing paper in the same size as the original. Set correct cassette Add paper in the cassette. Add Paper Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION (Cont.) Manual Paper Selection Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with dark borders, or non-regular sized originals such as newspaper and magazines, may be incapable of automatic paper selection. For these types of originals, use the manual paper selection. 1 Press the key with the initial screen shown in the COPY mode. 2 Use the or keys and select the paper cassette that you would like to feed paper from. Please note that the cassettes must be pre-defined with the size of paper loaded. Page 1-8 3 Place the original(s) on the original feed tray or on the glass. (“Setting Original”. Page 2-4) 4 Select desired copy mode and quantity as required. 5 Press the key. READY PAPER SUPPLY: :A4 :B4 Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION (Cont.) 5 Enter the desired copy quantity using the numeric keys. 6 Press the key. Tip If the paper misfeeds in the bypass and the Paper Jam Lamp flashes, remove the sheets from the bypass and replace them. Page 7-14. If the size of paper to be loaded is not identical to one specified in the default setting, the default settings must be reset. Page 1-11. Downloaded From ManualsPrinter.com Manuals BASIC MENU 2. REDUCTION AND ENLARGEMENT COPYING There are four methods available for enlargement and reduction copying. Using Automatic Magnification Selection (AMS): After selecting the AMS mode and copy size, the copier automatically detects the size of the original and calculates the appropriate reproduction ratio. For the e-STUDIO16, when the original is scanned on the glass, the user must to manually specify the size of the original. REDUCE/ENLARGE: When a regular-sized original and copy paper are used, select a ratio corresponding to the paper size. Selectable Ratio: Using Automatic Magnification Selection (AMS) 1 Press the key. ZOOM UP/DOWN: The Down and Up arrow keys select the desired reproduction ratio at 1% increments. XY ZOOM: This function allows you to alter the reproduction ratio in the X and Y directions of your copies. * Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with dark borders, or non-regular sized originals such as newspaper and magazines, may be incapable of automatic magnification selection. For these types of originals, use the reduction/enlargement modes. Ratio 50% 71% 82% 141% 200% Original/Copy A3/A5-R A3/A4-R, A4-R/A5-R, B4/B5-R B4/A4-R, B5-R/A5-R A4-R/A3, A5-R/A4-R, A5/A4, B5-R/B4 A5-R/A3 Downloaded From ManualsPrinter.com Manuals BASIC MENU 2. REDUCTION AND ENLARGEMENT COPYING (Cont.) Reduce/Enlarge 5 Place the original to be copied in the feeder or on the glass, key in the copy quantity, and press the key. 1 Select the appropriate paper cassette. (Manual Paper Selection Page 3-3.) 2 Press the key or key. Press the key and go to step 3, or press the key and go to step 4. 3 Use the or keys and select “REDUCE/ ENLARGE.” Press the key. 4 Select the desired reproduction ratio using the or key. Press the key. You must to manually specify the size of the original. READY PAPER A4 :AUTO FINISHING EDIT When a regular-sized original and copy paper are used, select a ratio corresponding to them. READY ZOOM: AMS REDUCE/ENLARGE ZOOM REDUCE /ENLARGE: 82% B4 > A4 141% A4 > A3 200% A5 > A3 Downloaded From ManualsPrinter.com Manuals BASIC MENU X-Y Zoom This function allows you to alter the reproduction ratio in the X and Y directions of your copies. 1 Press the key on the control panel. 2 Press the key to display “XY ZOOM.” Then press the key. 3 Specify the X and Y reproduction ratios. Select the X or Y direction using the or key and specify the reproduction ratio using the or key. Then press the key to accept the reproduction ratio. When the original is scanned on the original glass, the reproduction ratio can be specified to 50 % to 200 % for the e-STUDIO16, and 25 % to 400 % for the e-STUDIO20/25. When the original is scanned in the automatic document feeder (optional) or reversing automatic document feeder (optional), the reproduction ratio of 50 % to 200 % can be specified. 4 “Xxxx-Yxxx%” appears next to zoom on the display. 5 Select the desired paper cassette, image density and copy quantity. 6 Place the original on the glass or the feed tray and press the key. READY ZOOM: ZOOM UP/DOWN XY ZOOM ZOOM XY ZOOM: X 50% READY PAPER A4 :AUTO FINISHING EDIT 100%200% 100% 200% 2. REDUCTION AND ENLARGEMENT COPYING (Cont.) Downloaded From ManualsPrinter.com Manuals BASIC MENU 3 Press the or key to select the desired image density. T press the k step to the left and y lighter T press the k step to the r dar 4 When the key is pressed after density is set, the screen returns to the initial screen for copying. The specified cop displa 5 Place the original to be copied in the feeder or glass and press the key. Copies are made in the selected image density LIGHT/DARK MANUAL: -3-2-10+1+2+3 READY PAPER A4 : 2 FINISHING EDIT 3. COPYING WITH COPY DENSITY SELECTION (Cont.) Downloaded From ManualsPrinter.com Manuals BASIC MENU Downloaded From ManualsPrinter.com Manuals EDIT MENU 1. DUPLEX COPYING This function allows you to set the type of originals (1-sided, 2-sided or book-type) and the desired type of copying (1-sided or 2-sided). Original Copy *, , and require the optional automatic duplexing unit to be installed. * and require the optional reversing automatic document feeder to be installed. Downloaded From ManualsPrinter.com Manuals EDIT MENU 1-Sided Originals > 2-Sided Copies There are two methods of making duplexed copies from single-sided originals: Using the automatic document feeder (optional) or reversing automatic document feeder (optional) - For duplex-copying from sheet originals of the specified sizes and weights. Setting originals on the glass - For duplex-copying from originals that cannot be handled by the automatic document feeder (optional) or the reversing automatic document feeder (optional). Note This copying mode requires the automatic duplexing unit (optional) to be installed. 1. DUPLEX COPYING (Cont.) When using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (optional) 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “1 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 5 Place the originals on the feed tray. 6 Press the key. READY DUPLEX DUAL TYPE IMAGE SHIFT:OFF DUPLEX Original > Copy 1 > 1 1 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU When Placing the Original on the Glass 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “1 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 5 Place the first page of the originals (first side) on the glass. 6 Press the key. F \(APS\) mode or automatic magnification selection \(AMS\) is selected, a message appears prompting y siz Use the or k Then press the or 7 Place the next original (second side) on the glass. 8 Press the key. READY DUPLEX DUAL TYPE IMAGE SHIFT:OFF 1. DUPLEX COPYING (Cont.) Next original? YES NO DUPLEX Original > Copy 1 > 1 1 > 2 Select original size A4 A3 A4-R A5-R B4 Downloaded From ManualsPrinter.com Manuals EDIT MENU 2-Sided Originals > 2-Sided Copies Placing two sided originals on the re k The or scanned into memor Y 2\) or Note This cop duple 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “2 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, reproduction ratio, image density and copy quantity. The automatic paper selection mode is selected as the def 5 Place the originals on the feed tray. 6 Press the key. READY DUPLEX DUAL TYPE IMAGE SHIFT:OFF 1. DUPLEX COPYING (Cont.) DUPLEX Original > Copy 1 > 2 2 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU This cop 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “BOOK > 2” by pressing the key. 4 Press the key. 7 Specify the Book Margin then press the key, as necessary. Press the or k Each time either of the k incremented or decremented b Press the k k decrement the v Specify the v 6 Press the key. READY DUPLEX DUAL TYPE IMAGE SHIFT:OFF Book-Type Originals > 2-Sided Copies 5 Select the start and end page. Select the desired cop or key RIGHT > RIGHT Cop on a r RIGHT > LEFT Cop on a left page LEFT > LEFT Cop on a left page LEFT > RIGHT Cop on a r 1. DUPLEX COPYING (Cont.) DUPLEX Original > Copy 2 > 1 BOOK > 2 BOOK > 2 RIGHT > RIGHT RIGHT > LEFT LEFT > LEFT 8 Press the key. BOOK MARGIN 30mm 15mm 8mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 8 Press the key. 2. DUAL PAGE COPYING The f need not mo be copied onto tw Example of Dual P 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display the “DUAL PAGE” in reverse. Then press the key. 3 Press the key and select “ON.” Then press the key Upon selecting “ON”, y the appropr to 30 mm is acceptab When 20 mm is entered, a line that appears at the center of the cop made, a 10 mm margin is estab line When both the Edge Er specified, a bigger v 4 “DUAL PAGE: XXmm” appears. Press the key to return to the initial screen for copying. 5 Select the A4 paper cassette. 6 Place the original on the glass. 7 Select the desired image density, etc. as required. Only 100 % of reproduction r READY DUPLEX DUAL PAGE IMAGE SHIFT READY DUPLEX DUAL PAGE IMAGE SHIFT DUAL PAGE OFF ON BOOK MARGIN 30mm 8 mm 8mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 7 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 8 Press the key. 4. EDGE ERASE COPYING If the edges of an or Using the edge erase mode the mar to 20 mm. Example of Edge Er 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “Edge Erase.” Then press the key. 3 Press the key and select the “ON.” Then press the key. 4 The current edge erase margin appears on the screen. To change the edge erase margin, select the desired margin by using the or key. Then press the key. The edge er 5 The selected edge erase margin appears on the screen. Press the key to return to the initial screen for copying. 6 Place the original(s) on the feed tray or on the glass. READY DUAL PAGE IMAGE SHIFT EDGE ERASE READY DUAL PAGE IMAGE SHIFT EDGE ERASE EDGE ERASE OFF ON EDGE ERASE 20mm 10mm 4mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 5. 2-IN-1/4-IN-1 (Cont.) 5 Select the type of original and copy. 6 Press the key. 7 What is selected appears on the screen. Press the key to return to the initial screen for copying. 8 Select the desired paper cassette, image density, and copy quantity. 9 Press the key. 2IN1 Original > Copy 2 > 2 2 > 1 READY IMAGE SHIFT EDGE ERASE 2IN1/4IN1 Note T k and then select the desired paper cassette Downloaded From ManualsPrinter.com Manuals EDIT MENU The magazine sor along the inside as if y Note This copautomatic dupleunit \(optional\) to be installed. Example of magazine sor 6. MAGAZINE SORT 27 188765432145 36 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 3 Press the key to display “ON.” Then press the key. 4 Press the key and specify whether the originals are single-side or duplex. Then press the key. 5 “MAGAZINE SORT: X>2” appears. Press the key to return to the initial screen for copying. 6 Select the desired image density and copy quantity. READY EDGE ERASE 2IN1/4IN1 MAGAZINE SORT READY EDGE ERASE 2IN1/4IN1 MAGAZINE SORT 2 Press the key to display “MAGAZINE SORT.” Then press the key. MAGAZINE SORT OFF ON MAGAZINE SORT Original > Copy 1 > 2 2 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU 9 For the subsequent originals, repeat step 8 above. 10 When scanning of the last original has finished, select “NO.”Next Original? YES NO 11 Press the key. 6. MAGAZINE SORT (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU Tip In the annotation function, pr edge of the paper selected. cop Theref side of the machine 6 Place the original on the glass and press the key.When Placing the Original on the Glass 7 Select “YES,” set the next original and press the key. Next Original? YES NO Next Original? YES NO Memory clear? YES NOWhile the “Ne” screen is being sho the ANNO“YES” or “NO” and press the key 8 For the next and subsequent originals, repeat step 7 above. 9 When the last original is finished being scanned, select “NO.” 10 Press the key. 7. ANNOTATION (Cont.) F \(APS\) mode or automatic magnification selection \(AMS\) is selected, a message appears prompting y siz Use the or k Then press the document. When the first or“Ne Or” screen appears Select original size A4 A3 A4-R A5-R B4 Downloaded From ManualsPrinter.com Manuals EDIT MENU Negative/Positive Reversal This function allo * P Example of negativ 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “EDITING.” Then press the key. 3 Press the key and select “NEG/POS.” Then press the key. 4 “EDITING: NEG/POS” appears. Press the key to return to the initial screen for copying. 5 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 6 Place the original on the glass or the feeder tray and press the key. READY MAGAZINE SORT ANNOTATION EDITING READY MAGAZINE SORT ANNOTATION EDITING EDITING OFF MIRROR NEG/POS 8. EDITING (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU 1 Press the key on the control panel while in the initial screen for copying. 2 Press the key to display the “MIX SIZE”. Then press the key. 3 Press the key to display the “ON”. Then press the key. 4 Select the Automatic paper Selection (APS) mode or Automatic Magnification Selection (AMS) mode. Then select the desired paper cassette, reproduction ratio, image density and copy quantity as required. 5 Place the originals on the original feed tray. 6 Press the key. 10. COPYING MIXED SIZE ORIGINALS Put original in doc. feeder EDITING BUILD JOB MIX SIZE A set of or originals all have the same width. Note This copy function requires the optional reversing automatic document feeder \(RADF\) be installed. READY EDITING BUILD JOB MIX SIZE MIXED SIZE ORIGINAL OFF ON Note When the “MIX SIZE” is selected, the “APS” is automatically selected. Downloaded From ManualsPrinter.com Manuals EDIT MENU Recalling a Stored Combination of Copy Modes 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “JOB MEMORY” in reverse. Then press the key. 3 Press the key while “RECALL” is selected. 4 Select the desired Job number from “MEMORY1” to “MEMORY4”. Then press the key. Press the key to return to the initial screen for copying. Tip When the selected memor prog bo 5 Place the original on the glass or the feed tray and press the key. The original is copied in the combination of modes you have recalled. READY EDITING JOB BUILD JOB MEMORY JOB MEMORY RECALL MEMORY MEMORY MEMORY1 MEMORY2 MEMORY3 MEMORY4 11. JOB MEMORY (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU 13. MENU LIST 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. Pr’s men READY JOB MEMORY PAPER TYPE MENU LIST MENU LIST Printing acceptedThe menu list will be pr 2 Press the key to display “MENU LIST.” Then press the key. Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION 1. FINISHING MODE SELECTION Offset Tray (option) When the Offset Tray is configured, the copied set are collated or stacked in groups with each set offset. Job Separator (option) The job separator function allows a copied job and an optional fax job to be output onto separate paper trays. Stapler (option) Sets of copies can be manually stapled when the stapler with work surface is attached. Finisher (option for e-STUDIO20/25 only) When the Finisher is attached, the OFFSET, SORT/OFFSET, and STAPLE functions become available. Tr a y s Paper stopper Note When longer paper, such as Ledger size, is designated to output onto the lower tray, please use the paper stopper attached to the Job Separator. (Do not use the paper stopper attached to the lower tray.) Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION As sets of copies are output, the sets are sorted. Example: Making 5 sets of copies from 5-paper originals *Bypass copying is not possible in the sor t mode. 3. SORT COPYING 1 Place the originals in the feeder. Confirm that “SORT” is shown for “FINISHING.” 2 If “FINISHING:SORT” is not displayed, press the key and select the sort mode. Select “SORT” from the FINISHING menu by pressing the key. Then press the key. 3 Key in the desired copy quantity (sets) using the numeric keys. 4 Select the desired paper cassette, image density and reproduction ratio. 5 Press the key. The copier starts scanning the original. Press the key to stop scanning the original temporarily. Press the key to resume scanning. 54321 54321 54321 54321 54321 54321 Press START to resume PAPER A4-R :AUTO FINISHING If the stopped, the scanned data is deleted and the sor is ter“YES” or “NO” and press the key When all or star Memory clear? YES NO Tip NON SOR only when the Offset READY FINISHING: NONSORT/OFFSET SORT When Using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (optional) Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION 4. OFFSET COPYING When the Offset output in one pile b Example:Making 6 sets of copies from 3-page or \(Bypass cop mode 1 Place the originals in the feeder or on the glass. Select the desired number of copies, image density and reproduction ratio. 3 Select the OFFSET mode. Select “NONSOR” or “SOR” from the FINISHING men k the key 321 111 2 Press the ke“FINISHING” screen appear When the offset tra Remo Remo k contin Ref“NON-SOR COPYING” when “NONSOR” is selected. P Ref“SOR” when “SOR” is selected. P READY FINISHING: NONSORT/OFFSET SORT SORT/OFFSET Downloaded From ManualsPrinter.com Manuals 6-8FINISHING MODE SELECTION When Placing the Original on the Glass 2 Select the “AL” mode Select “AL” from the FINISHING men pressing the k key 3 K ke 4 Select the desired ima ratio. 5 Place the original and press the ke When scanning of the first or“NEXT ORIGINAL?” screen appears 6 Select “YES,” set the ne ke 7 For the ne 6. 8 When the last original has been finished being scanned,“NO” 1 Press the ke“FINISHING” screen appear Copying PAPER A4 :AUTO FINISHING The copier star Press the temporar Press START to resume PAPER A4 :AUTO FINISHING If the stopped, the scanned data is deleted, and the alter ter“YES” or “NO” and press the key When all or star Memory clear? YES NO Next Original? YES NO 5. READY FINISHING: SORT/OFFSET ALTERNATION Downloaded From ManualsPrinter.com Manuals 6-10FINISHING MODE SELECTION 6. When the optional finisher is installed, y capacity f A4, A4-R, B5 \(30 sheets B4 A3, FOLIO When the optional finisher is installed \(option f ABABAB FinishSet on the A Document FPlaced on the glass 1 Place the originals in the f 3 Select the “ST” mode Select “ST” from the FINISHING men k ke 4 K ke 5 Select the desired ima ratio. 6 Press the ke The copier star each set of copies are ejected. 2 Press the ke“FINISHING” screen appear When Using the A the Rever READY FINISHING:SORT SORT/OFFSET STAPLE Downloaded From ManualsPrinter.com Manuals 6-12FINISHING MODE SELECTION T’s top edge align them to the guide in the diagonal direction. When sets of copies are inser direction v Stapler kit \(KK-1600\) is installed. T in the front. 6. When the optional Stapler kit is installed Downloaded From ManualsPrinter.com Manuals 7-2WHEN THE GRAPHIC SYMBOL FLASHES 1. DESCRIPTION OF THE GRAPHIC SYMBOLS The message display panel shows the status of the copier. When one of the graphic symbols flashes, go to the pages referenced and take the recommended action. Page 7-12 to 23 Page 7-3 Page 7-5 Downloaded From ManualsPrinter.com Manuals 7-4WHEN THE GRAPHIC SYMBOL FLASHES B A 1 Pulling up the grip, draw out the large-capacity feeder carefully until it comes to a stop. 2 Open some paper packages, take out entire reams of paper and set them aligned in tray and tray . When setting the paper to the r aside to the left aside set neatly if y the tr and .\) Be sure that the centre le \(Ref Do not add paper abo Up to 2500 sheets of paper \(recommended b be set. P at first, and when it r mov position . Do not use creased, f per 2. LOADING PAPER (Cont.) Adding Paper to the Large-Capacity Feeder (option for e-STUDIO20/25) 3 Close the cover of the large-capacity feeder. Close the co mo Downloaded From ManualsPrinter.com Manuals 7-6WHEN 4 It is possible that the toner may have become caked in the replacement Toner Cartridge. In order to insure the toner flows smoothly, shake the new Toner Cartridge back and forth several times. 5 Pull the tab or remove the sealing tape from the new cartridge. 6 Install the new Toner Cartridge sliding it into the copier. 7 After installing the Toner Cartridge, move the charger wire cleaning lever (in and out) of the Process Unit several times to clean the charger wire. 3. REPLACING TONER CARTRIDGE (Cont.) Downloaded From ManualsPrinter.com Manuals 7-8WHEN Replacing Process Unit 1 Open the stack feed bypass. 2 Open the automatic duplexing unit by pulling up on the release grip. (Not all copiers are equipped with automatic duplexing units.) 3 Open the side cover of the copier. 4. REPLACING PROCESS UNIT Note Do not e sunlight or touch the dr The Process Unit requires replacement when the “Dr” is displa Tip When “Dr” is displa cop“Replace process unit” and the copier stops Downloaded From ManualsPrinter.com Manuals 7-10WHEN 4. REPLACING PROCESS UNIT (Cont.) 11 Pull the tab to remove the sealing tape from the Process Unit. Important Ne of the Process Unit. will cause pr Do not e Unit to light f be left an with cloth, paper 12 Insert the new Process Unit all the way into the copier. Then install the Toner Cartridge by reversing the removal procedure. Alw touch the g out of the copier f 13 After installing the Toner Cartridge, move the charger wire cleaning lever (in and out) of the Process Unit several times to clean the charger wire. 9 Discard the used Process Unit properly. 10 Open the package and take the new Process Unit out. 8 Grasping the colored handle on top of the Process Unit, remove the Process Unit from the copier. 14 Close the covers opened during this procedure and latch the deplexing unit into position (if attached). Downloaded From ManualsPrinter.com Manuals 7-12WHEN 5. CLEARING PAPER JAM Remo Use the f the Re jammed in the A remo 1 Press the button to unlock and open the cover. Paper Misfeeds in the Reversing Automatic Document Feeder (optional) When a paper misf appears: An illustr or k Misf xxxx represents the position where the tr to the f Misfeed in copier Open side cover of the copier. 1/ 4 Downloaded From ManualsPrinter.com Manuals 7-14WHEN 5. CLEARING PAPER JAM (Cont.) 5 Lift the original tray. When holding the co careful not to get y 8 Lift the reversing automatic document feeder to expose the under side. Then press the blue lever to release the access panel. 6 Remove any misfed originals. 7 Lower the original tray and close the reversing automatic document feeder cover. Downloaded From ManualsPrinter.com Manuals 7-16WHEN 5. CLEARING PAPER JAM (Cont.) 1 Open the side cover. 2 Remove any misfed paper. Then close the cover. Paper Misfeeds in Paper Feed Pedestal (optional) B Paper Misfeed in the Large-Capacity Feeder (option for e-STUDIO20/25) 2 Remove any misfed paper. 1 Open the cover . Downloaded From ManualsPrinter.com Manuals 7-18WHEN 5. CLEARING PAPER JAM (Cont.) 1 Making sure that the stack feed bypass and the automatic duplexing unit are opened, open the side cover.Paper Misfeeds in the Drum/Charger area 2 Press the two blue levers. To release any paper in the fuser unit. Caution As the Fuser Section is heated, pa handling it. 3 Rotate the knob indicated with a blue arrow toward the inside and remove any misfed paper. 4 After clearing all paper, return the two blue levers. Close the exit cover and the right side cover. Return the duplex unit to its normal position (if installed). Downloaded From ManualsPrinter.com Manuals 7-20WHEN 4 Press the two blue levers. To release anypaper in the fuser unit. 5. CLEARING PAPER JAM (Cont.) 5 After clearing paper, return the two blue levers. Close the fuser cover and tighten the two blue screws. Close the exit cover and the right cover. Return the automatic duplexing unit to normal position (if installed). Downloaded From ManualsPrinter.com Manuals 7-22WHEN 5. CLEARING PAPER JAM (Cont.) 2 Remove any misfed paper inside the relay unit. Paper Misfeed in the Relay Unit (option for e-STUDIO20/25) If paper is misf it pushing do Remo easier 1 Holding the cover handle of the relay unit, open it. Downloaded From ManualsPrinter.com Manuals 7-24WHEN 6. ADDING STAPLES Finisher (option for e-STUDIO20/25) 1 By pulling the lever, move the finisher away care- fully from the copier. 4 Remove the empty staple case upward from the staple cartridge. 5 Push in a new staple case into the staple cartridge completely inside until a click is heard. Do not remo case is set in the car 2 Holding the sides of the staple cartridge, slide it out. 3 Turn the staple cartridge upside down. Downloaded From ManualsPrinter.com Manuals 7-26WHEN 6. ADDING STAPLES (Cont.) Be sure to tur 1 Slide forward and lift up the staple cover. 2 Pull out the staple cartridge. 3 Press the cartridge knob to remove the empty staple case. 4 Insert a new staple case into the cartridge. Do not peel off the stic inser Staple kit (option) Downloaded From ManualsPrinter.com Manuals 7-28WHEN 7. REMOVING JAMMED STAPLES Finisher (option for e-STUDIO20/25) 1 Perform steps 1 and 2 of the procedure for “6. ADDING STAPLES Finisher ” ( Page 7-22). 3 Remove any jammed staples using your fingertip or something sharp. 4 Holding the knob, return part to its original position. A A 2 Holding the knob, lower part . 5 Return the staple cartridge to its original position. Inser with a clic 6 Attach the finisher to the copier. Downloaded From ManualsPrinter.com Manuals 7-30WHEN 5 Close the staple cover. 6 Restore power to the copier. Confirm proper operation of the stapler. 7. REMOVING JAMMED STAPLES (Cont.) Downloaded From ManualsPrinter.com Manuals 7-32WHEN 9. PERIODIC MAINTENANCE Note When the either of the following messages appears on the message display: Time f Maintenance/Drum This indicates that assistance from a qualified service technician is required. Call for service.or Downloaded From ManualsPrinter.com Manuals 9-2MAINTENANCE 1. DAILY INSPECTION Items to inspect every morning Power switch ON/OFF status We recommend turning the power switch ON at startup every morning so that copies can be made whenever you want. Also, make sure that you turn the power switch OFF when you leave the office. Items to inspect once a week Cleaning the Original Cover Clean the original cover or the back of the automatic document feeder (optional) or reversing automatic document feeder (optional) with alcohol or a well-squeezed soft cloth moistened with a neutral detergent. Then dry with a soft cloth. Cleaning the Automatic Document Feeder (optional) or Reversing Automatic Document Feeder (optional) Clean the automatic document feeder (optional) roller or reversing automatic document feeder (optional) roller with alcohol or a soft cloth moistened with a neutral detergent. Make sure that the soft cloth is squeezed well. Then dry with a soft cloth. Note Before cleaning the copier, be sure to turn OFF power switch. Please be careful not to scratch the glass surface or back of the cover, when cleaning it. Cleaning the Original Glass Clean the original glass scanning glass of the auto document feeder and scale with a soft cloth moistened with cleaning liquid. Then dry with a soft cloth. Downloaded From ManualsPrinter.com Manuals 9-4MAINTENANCE Cleaning the transfer charger wire 1 Making sure that the stack feed bypass and the automatic duplexing unit (if installed) are opened, open the side cover. 2 Clean the transfer charger wire using the attached charger cleaning accessory. 3 Close the side cover, automatic duplexing unit and stack feed bypass. 2. CLEANING THE WIRE (Cont.) When any of the following is generated on the copy, clean the transfer charger wire. White lines in the direction of paper feed. Uneven tone or dim images. BE SURE TO TURN OFF THE POWER before cleaning the transfer charger wire. Downloaded From ManualsPrinter.com Manuals 9-6MAINTENANCE 3. SIMPLE TROUBLE SHOOTING (Cont.) Copies are stained Countermeasure Close the cover firmly to shut out any external light. Clean the original glass with a cloth moistened with cleaning liquid. Then wipe it with a dry cloth. Clean the original cover with a cloth moistened with a neutral detergent. Then wipe the detergent completely off with a dry cloth. Set the image density properly. Reference page _ 9-2 9-2 3-12 Items to be checked Is the original cover firmly closed? Is the original glass dirty? Is the original cover dirty? Is the image density set properly? Countermeasure Replace the toner cartridge. Set the image density properly. Reference page 7-4 3-12 Items to be checked Has the message “Toner empty” appeared on the screen? Is the image density set properly? Countermeasure Set the image density properly.Reference page 3-12Items to be checked Is the image density set properly? Copy density is too low Copy density is too high Downloaded From ManualsPrinter.com Manuals 9-8MAINTENANCE Downloaded From ManualsPrinter.com Manuals 10-2SPECIFICATIONS & OPTIONS 1. e-STUDIO16/20/25 SPECIFICATIONS Model Name Body Type Copying System Original Glass Original Cover (Platen Cover) Frame Structure Photosensor Type Original Scanning System Resolution Scanning Data Output System Image Memory Maximum Original Capacity (with max. image memory installed) * Acceptable Originals Acceptable Copy Paper Size Warm-up Time First Copy Time Multiple Copying Reproduction Ratio Paper Supply Copy Density Adjustment Power Requirement/ Power Consumption Dimensions (Main Body only) Weight (Main Body only) DP1600/2000/2500 Desktop type Indirect electrophotographic method Fixed (original referenced to top left, referenced to center when using the Automatic Document Feeder or the Reversing Automatic Document Feeder) Option Fixed frame method OPC drum CCD sensor (7450 pixels) 600 x 600 dpi One Scan Multi-Copying Sort memory : (Std.) 8 MB (Max.) 136 MB Single sided : 250 sheets Double sided : 125 sheets Sheets, books and three-dimensional objects Automatic feeding : A3 to A5-R Manual feeding : A3 to A5-R 60 sec. or less (e-STUDIO16), 70 sec. or less (e-STUDIO20/25) 7.9 sec. or less (e-STUDIO16), 6.0 sec. or less (e-STUDIO20/25) Up to 999 copies (numeric key entry) Preset ratio : 50, 71, 82, 141, 200% Zoom : 50 to 200% (e-STUDIO16), 25 to 400% (e-STUDIO20/25)** (in 1% increments) Cassette: 64 to 80 g/m 2 550 sheets (Height of 60.5 mm or less when loaded) Automatic plus manual selection from 7 steps 220-240 VAC, 50/60 Hz 1.4 KW or less (e-STUDIO16), 1.7 KW or less (e-STUDIO20/25) 110-127 VAC, 50/60 Hz 1.4 KW or less (for Saudi Arabia 100V version only) 530 mm (W) x 554 mm (D) x 600 mm (H) Applox. 50 kg Specifications and appearance are subject to change without notice. * Requires optional memory and varies depending upon originals used and amount of memory installed. ** When the original is scaned in the automatic document feeder (optional) or reversing automatic document feeder (optional), the reproduction ratio of 50% to 200% can be specified. Downloaded From ManualsPrinter.com Manuals 10-4SPECIFICATIONS & OPTIONS Automatic Duplexing Unit Model Name Acceptable Originals Power Source Dimensions Weight MD-0101 Maximum A3 Minimum A5-R Paper weight 64 to 80 g/m2 Supplied from the copier 101 mm (W) x 488 mm (D) x 345 mm (H) Approx. 4.3 kg Paper Feed Unit Model Name Acceptable Paper Size Acceptable Paper Weight Cassette Capacity Power Source Dimensions Weight MY-1015 A3, A4, FOLIO, A4-R, B4, A5-R, LT, LT-R 64 to 80 g/m2 550 sheets (Height of 60.5 mm or less when loaded) Supplied from the copier 530 mm (W) x 536 mm (D) x 112 mm (H) Approx. 7.7 kg Paper Feed Pedestal/Large-capacity Feeder (for e-STUDIO20/25 only) Model Name Type Number of Cassettes Acceptable Paper Size Acceptable Paper Weight Cassette Capacity Power Source Dimensions Weight KD-1009 (Paper Feed Pedestal) Console Type One A3, A4, FOLIO, A4-R, B4, A5-R, LT, LT- R 64 to 80 g/m2 550 sheets (Height of 60.5 mm or less when loaded) Supplied from the copier Approx. 17 kg 2. SPECIFICATION OF OPTIONS (Cont.) Specifications and appearance are subject to change without notice. KD-1010 (Large-capacity feeder) A4 2500 sheeets Approx. 23 kg 530 mm (W) x 536 mm (D) x 305 mm (H) Downloaded From ManualsPrinter.com Manuals 10-6SPECIFICATIONS & OPTIONS Stack Feed Bypass Model Name Acceptable Paper Loading Capacity Power Source Dimensions Weight MY-1016 Continuous feed: 64 to 80 g/m 2 Single sheet feed: 80 to 163 g/m2 100 sheets (Height of 16 mm or less when loaded) Supplied from the copier 485.1 mm (W) x 119.6 mm (D) x 227.4 mm (H) Approx. 2.6 kg Stapler Model Name Type of Stapling Number of Sheet Stapled Staple Capacity Power Source Dimensions Weight KK-1600 Flat Clinch Method Up to 50 sheets of 52 to 80 g/m 2 paper Up to 48 sheets of 52 to 80 g/m 2 paper + 2 sheets of 200 g/m2 paper Paper thickness: Max. 5.5 mm 5000 staples Supplied from the copier 257 mm (W) x 423 mm (D) x 173 mm (H) Approx. 3.4 kg 2. SPECIFICATION OF OPTIONS (Cont.) Finisher (for e-STUDIO20/25 only) MJ-1011 A3, A4, A4-R, A5-R, B4, B5, B5-R 60 to 80 g/m2 30 sheets (A4, A4-R, B5, LT, LT- R) 20 sheets (B4) 15 sheets (A3) Rear Supplied from the copier 431 mm (W) x 541 mm (D) x 413 mm (H) Approx. 18.6 kg *Specifications and appearance are subject to change without notice. Model Name Copy Size Paper Thickness Number of Copies Staple at a Time (64 to 80 g/m 2) Stapling Position Power Source Dimensions Weight Downloaded From ManualsPrinter.com Manuals 10-8SPECIFICATIONS & OPTIONS 4. COPY FUNCTION COMBINATION MATRIX e-STUDIO16/20/25 Copy Function Combination Table The reason why the combination is not available.*1When 2nd function is programmed, the 1st function is cleared. *2When 2nd function is programmed, the magnification ratio is reset to 100%. *3When 2nd function is programmed, the magnification ratio is reset to 100% and the Paper-Auto function is selected automatically. *4When 2nd function is programmed, the Lighten/Darken is reset to “Auto” mode. *5It is impossible to change the magnification ratio manually. *6When 2nd function is programmed, the Paper-Auto is reset and A4 or LT size paper is selected automatically. *7The annotation is added only on the leading edge of copy output in transportation direction. Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 No No No No No No No Yes *F Ye s Ye s Ye s No *1 No No No Ye s No *5 Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Ye s No *5 No *5 Yes *A Yes *A Ye s Ye s Ye s Ye s No *1 Ye s Ye s Ye s No Ye s No Zoom (Manual) *BLight/Dark(Auto/Manu) Dual Page Edge Erase *C Image Shift *D APS AMS Text Mode Photo Mode Text/Photo Sort Sort-Offset Offset Magazine Sort2-in-1/4-in-1(Include Duplex) Page Number Page Number & Date 1->2 2->1 2->2Bypass(Undefined Size) X-Y Zoom Neg/Pos Mirror Alternation Book -> 2 Staple Mix Size 2nd FunctionOffsetSort-OffsetSortText/PhotoPhoto ModeText ModeAMSAPSImage Shift *DEdge Erase *CDual PageLighter/Dark(Auto Manu) Zoom (Manual) *B Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *2 Ye s Ye s No No *6 No *1 *2 Ye s Ye s Ye s Ye s Ye s No No No No *7 No *7 Ye s No No No No *2 No No Ye s No Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s No No Ye s Ye s Ye s Ye s No Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No No No Ye s Ye s No *2 Ye s No Ye s Ye s No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s*F No *1 Ye s Ye s No No Ye s Ye s No *2 Ye s No Ye s Ye s No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s*F No *1 Ye s Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Yes *E Yes *E Yes *E Yes *E Yes *E Yes *E Yes *E Yes *F Ye s No No No *1 Yes *E No Yes *E Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *F Ye s No No No *1 Ye s No Ye s 1st Function Downloaded From ManualsPrinter.com Manuals 10-10SPECIFICATIONS & OPTIONS Downloaded From ManualsPrinter.com Manuals
4-3 1 2 3 4 5 6 7 9 10 11 128 1-Sided Originals > 1-Sided Copies (default setting) This copy mode is selected as the default setting when the copier is turned on. To change use the following procedures. 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 3 Select “1>1” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. Tip The menu that appears here varies depending on whether the auto-duplexer unit (optional) and the reversing automatic document feeder (optional) are installed or not. 2 Confirm that “DUPLEX” is highlighted on the screen. Press the key. 6 Press the key. 5 Place the original(s) on the feed tray or on the glass. 4 Select the desired paper cassette, reproduction ratio, image density and copy quantity. DUPLEX 1 Original > Copy 1 > 1 1 > 2 READY 1 DUPLEX :1 > 1 DUAL PAGE :OFF IMAGE SHIFT :OFF Downloaded From ManualsPrinter.com Manuals
1 2 3 4 5 6 7 9 10 11 128 1-2BEFORE MAKING COPIES 1. DESCRIPTION OF THE OPTIONAL EQUIPMENT Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011) Stapler (KK-1600) Job separator (MJ-5001) Offset tray (MJ-5002) Automatic duplexing unit (MD-0101) Stack feed bypass (MY-1016) Paper feed unit (MY-1015) Paper feed pedestal (KD-1009) e-STUDIO16 e-STUDIO20/25 Stapler (KK-1600) Automatic duplexing unit (MD-0101) Stack feed bypass (MY-1016) Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011) Finisher including Transportation bridge (MJ-1011)* (e-STUDIO20/25 only) Paper feed unit (MY-1015) Large Capacity Feeder (KD-1010)** (e-STUDIO20/25 only) * The Job separator (MJ-5001) or Offset tray (MJ-5002) can be installed in place of the Finisher. ** The Paper feed pedestal (KD-1009) can be installed in place of the Large capacity feeder (KD-1010). Furthermore, the Cassette module (MY-1017) (option for e-STUDIO20/25) can be installed in KD- 1009. Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Control Panel IMAGE MODE You can switch between the image modes (Text, Text/Photo and Photo) for copying. The lamp of the currently selected image mode illuminates. Message Display Panel Displays the copier conditions, operating procedures, and various instructions and information to the user in text and graphics. LIGHT/DARK Use this key when making a copy to specify the copy density. PAPER SUPPLY You can specify from which paper cassette you would like to feed paper for making a copy. ZOOM You can specify the scaling factor for copying. FINISHING You can specify how you would like to output copies (including Sort and Offset). COPY Press this key to switch from the other modes to the COPY mode. This manual describes the settings and operation in the COPY mode in detail. Paper Jam Lamp This lamp blinks when an original or copy paper is jammed. Recording Paper Lamp This lamp blinks in the COPY mode when no paper is loaded in the selected paper cassette. Toner Lamp This lamp illuminates when the toner is about to run out or runs out completely. PC Communication Lamp This lamp is not used in the COPY mode. This lamp blinks while the copier is serving as a printer and communicating with your computer, while it is printing out in the PRINTER mode, or while it is communicating as a local scanner. FAX Communication Lamp This lamp is not used in the COPY mode. This lamp blinks while the copier is communicating in the FAX mode. 2. DESCRIPTION OF THE DIGITAL COPIER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES When the power is turned on, the following basic screen is shown on the Message Display Panel. (When the copier is controlled using the department code, a different screen is display. Page 1-13) The Message Display Panel indicates the copier’s status. It also illustrates operational procedures or settings using brief sentences or icons. Message Display Panel 2. DESCRIPTION OF THE DIGITAL COPIER (Cont.) Message Copy quantity Light/Dark Zoom Paper size of the currently selected paper source Finishing READY 1 PAPER : A4 :AUTO FINISHING :SORT ZOOM :100% EDIT Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Changing the Paper Size of the Cassette The paper size of the copier’s cassettes can be changed to appropriate paper sizes using the following procedure. 3 Push the right (unlock) side of the size selection lever to unlock it. 4 While pushing the size selection lever in the direction of the arrow, set the side guide to the desired paper width (as indicated on the bottom surface of the cassette). 2 Move the width guide to the desired paper size position (as indicated on the bottom surface of the cassette). 1 Pull the cassette out until it stops. 3. PAPER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES 3. PAPER (Cont.) Turning ON the Power Switch / Auto Job Start Turning On the Power Switch 2 The “Ready” message appears. This message indicates that the copier is ready for operation. Auto Job Start READY 1 PAPER :APS :AUTO FINISHING :NONSORT ZOOM :100% EDIT While the copier is warming up, place the original on the glass, select the desired copy modes and press the key. Wait warming up:Auto Start When the machine reaches its proper operating temperature, copying will automatically star t. Tip Even after you have pressed the key, you can change the copy modes if copying has not yet started. To cancel the auto job start mode, press the key. 1 Open the power switch cover and turn ON the switch. This message appears on the message display panel of the basic screen : Please wait Wait warming up Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES 7 Repeat steps 4 to 6 to specify the paper size for other paper cassettes, as necessary. 8 Press the key to return to the initial screen for copying. 3. PAPER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 1. GENERAL COPYING PROCEDURE When originals are set and the key is pressed with all settings unchanged, copies are made using the initial (default) settings (*1). By selecting various copy modes, you can alter the number and type of copies to be made. 1 Place originals. When placing an original on the glass: Page 2-5 When placing originals facing up in the automatic document feeder (optional) or the reversing automatic document feeder (optional): Page 2-6 The initial (default) settings of the copier at the time of installation are as shown on the right. You can change these initial settings. Page 5-18 *1 The copy modes that are automatically set when the power is turned on or when the key is pressed on the control panel are called the initial (default) settings. Copying Procedure Reproduction ratio ........... 100% Copy quantity ................... 1 Automatic paper selection 1-side copies from 1-side originals Automatic image density Text/photo mode Non-sort mode Initial settings Original scale Original Slide Automatic document feeder Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 2. SETTING ORIGINALS Originals The following specifications apply to originals that can be used with this copier: Remarks Do not place any heavy object (4 kg or over) on the glass. Some of the originals on the left may not be used depending on type or thickness. (For details, consult your service technician.) Some of the originals on the left may not be used depending on paper quality. Maximum number that can be set 50 originals (50 to 80 g/m 2) or stacked height of originals 8 mm or less 100 originals (50 to 80 g/m 2) or stacked height of originals 16 mm or less Size capable of automatic detection Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 (for e-STUDIO20/ 25 only) Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 Types of original Sheets Three-dimensional objects Books Plain paper, thermal paper (for word processor or fax), long originals, originals with filing holes (2-, 3- and 4- holes): 50 to 105 g/m 2 (Multi-sheet feeding) 50 to 127 g/m 2 (1-sheet feeding) Plain paper, thermal paper (for word processor or fax), long originals, originals with filing holes (2-, 3- and 4- holes): 50 to 127 g/m 2 (1-sided original) 50 to 105 g/m 2 (2-sided original) Setting place Glass Automatic document feeder (optional) Reversing automatic document feeder (optional) Maximumsize Width : 302 mm Length : 432 mm Width : 297 mm Length : 432 mm Width : 297 mm Length : 432 mm Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES Using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (option) 2. SETTING ORIGINALS (Cont.) 1 After aligning the edges of the originals well, place them on the original feed tray facing up and align the slides to the width of the originals. Slide Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 3. INTERRUPT COPYING The interrupt copy is a convenient feature that allows the user to pause a job that is currently in progress. 1 Press the key. This message appears: Job interrupted The key illuminates during the INTERRUPT copying. Note One interrupt copy can be made from multiple originals by placing them on the glass one at a time. 2 Place the original. If the previous original remains on the glass, open the original cover or automatic document feeder (optional) or the reversing automatic document feeder (optional) and replace it with the original to be interrupt-copied. 3 Press the key. Repeat steps 2 to 4 if you need to interrupt copying again. 4 After interrupt copying is finished, press the key again. When the following is shown on the Message Display, press the key and perform the interrupted jobs. Ready to resume job. Ready to resume job 3 PAPER :APS :AUTO FINISHING :SORT ZOOM :100% EDIT Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION Automatic Paper Selection (APS) When the power switch is turned ON, the Automatic Paper Selection (APS) mode is selected as the default mode. In this mode, when a regular-sized original is loaded for copying, the copier detects the original size automatically and selects a same paper size as the original size. For the e-STUDIO16, when the original is placed on the glass for copying, the copier cannot detect its size automatically. A message appears prompting the user to specify the size of the original. * This mode can only be used for actual-size (100%) copying. * For automatically selectable original sizes: Page 2-4 1 Check that APS mode is selected in the upper left portion of the Message Display. 4 Enter the desired copy quantity using numeric keys. A copy quantity up to 999 can be keyed in. The copy quantity default is set at one. When an incorrect quantity is set, press the key and key in the correct number. If you press the key, all current copier settings will be cleared, and returned to the default settings. 3 Select desired copy mode. 2 Place the original(s) on the original feed tray or on the glass. READY 1 PAPER :APS :AUTO FINISHING :SORT ZOOM :100% EDIT 5 Press the key. If the following messages are shown; Change the direction of original(s). Change direction of original. Load the cassette containing paper in the same size as the original. Set correct cassette Add paper in the cassette. Add Paper Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION (Cont.) Manual Paper Selection Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with dark borders, or non-regular sized originals such as newspaper and magazines, may be incapable of automatic paper selection. For these types of originals, use the manual paper selection. 1 Press the key with the initial screen shown in the COPY mode. 2 Use the or keys and select the paper cassette that you would like to feed paper from. Please note that the cassettes must be pre-defined with the size of paper loaded. Page 1-8 3 Place the original(s) on the original feed tray or on the glass. (“Setting Original”. Page 2-4) 4 Select desired copy mode and quantity as required. 5 Press the key. READY 1 PAPER APS SUPPLY: :A4 :B4 Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION (Cont.) 5 Enter the desired copy quantity using the numeric keys. 6 Press the key. Tip If the paper misfeeds in the bypass and the Paper Jam Lamp flashes, remove the sheets from the bypass and replace them. Page 7-14. If the size of paper to be loaded is not identical to one specified in the default setting, the default settings must be reset. Page 1-11. Downloaded From ManualsPrinter.com Manuals BASIC MENU 2. REDUCTION AND ENLARGEMENT COPYING There are four methods available for enlargement and reduction copying. Using Automatic Magnification Selection (AMS): After selecting the AMS mode and copy size, the copier automatically detects the size of the original and calculates the appropriate reproduction ratio. For the e-STUDIO16, when the original is scanned on the glass, the user must to manually specify the size of the original. REDUCE/ENLARGE: When a regular-sized original and copy paper are used, select a ratio corresponding to the paper size. Selectable Ratio: Using Automatic Magnification Selection (AMS) 1 Press the key. ZOOM UP/DOWN: The Down and Up arrow keys select the desired reproduction ratio at 1% increments. XY ZOOM: This function allows you to alter the reproduction ratio in the X and Y directions of your copies. * Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with dark borders, or non-regular sized originals such as newspaper and magazines, may be incapable of automatic magnification selection. For these types of originals, use the reduction/enlargement modes. Ratio 50% 71% 82% 141% 200% Original/Copy A3/A5-R A3/A4-R, A4-R/A5-R, B4/B5-R B4/A4-R, B5-R/A5-R A4-R/A3, A5-R/A4-R, A5/A4, B5-R/B4 A5-R/A3 Downloaded From ManualsPrinter.com Manuals BASIC MENU 2. REDUCTION AND ENLARGEMENT COPYING (Cont.) Reduce/Enlarge 5 Place the original to be copied in the feeder or on the glass, key in the copy quantity, and press the key. 1 Select the appropriate paper cassette. (Manual Paper Selection Page 3-3.) 2 Press the key or key. Press the key and go to step 3, or press the key and go to step 4. 3 Use the or keys and select “REDUCE/ ENLARGE.” Press the key. 4 Select the desired reproduction ratio using the or key. Press the key. You must to manually specify the size of the original. READY 1 PAPER : A4 :AUTO FINISHING :SORT ZOOM :65% EDIT When a regular-sized original and copy paper are used, select a ratio corresponding to them. READY 1 ZOOM: 100% AMS REDUCE/ENLARGE ZOOM 1 REDUCE 50% A3 > A5 /ENLARGE: 71% A3 > A4 82% B4 > A4 141% A4 > A3 200% A5 > A3 Downloaded From ManualsPrinter.com Manuals BASIC MENU X-Y Zoom This function allows you to alter the reproduction ratio in the X and Y directions of your copies. 1 Press the key on the control panel. 2 Press the key to display “XY ZOOM.” Then press the key. 3 Specify the X and Y reproduction ratios. Select the X or Y direction using the or key and specify the reproduction ratio using the or key. Then press the key to accept the reproduction ratio. When the original is scanned on the original glass, the reproduction ratio can be specified to 50 % to 200 % for the e-STUDIO16, and 25 % to 400 % for the e-STUDIO20/25. When the original is scanned in the automatic document feeder (optional) or reversing automatic document feeder (optional), the reproduction ratio of 50 % to 200 % can be specified. 4 “Xxxx-Yxxx%” appears next to zoom on the display. 5 Select the desired paper cassette, image density and copy quantity. 6 Place the original on the glass or the feed tray and press the key. READY 1 ZOOM: REDUCE/ENLARGE ZOOM UP/DOWN XY ZOOM ZOOM 1 XY ZOOM: 200% X 100 % - Y 99 % 50% READY 1 PAPER : A4 :AUTO FINISHING :SORT ZOOM :X100-Y99% EDIT 100%200% 100% 200% 2. REDUCTION AND ENLARGEMENT COPYING (Cont.) Downloaded From ManualsPrinter.com Manuals BASIC MENU 3 Press the or key to select the desired image density. T press the k step to the left and y lighter T press the k step to the r dar 4 When the key is pressed after density is set, the screen returns to the initial screen for copying. The specified cop displa 5 Place the original to be copied in the feeder or glass and press the key. Copies are made in the selected image density LIGHT/DARK 1 MANUAL: -3-2-10+1+2+3 READY 1 PAPER : A4 : 2 FINISHING :SORT ZOOM :100% EDIT 3. COPYING WITH COPY DENSITY SELECTION (Cont.) Downloaded From ManualsPrinter.com Manuals BASIC MENU Downloaded From ManualsPrinter.com Manuals EDIT MENU 1. DUPLEX COPYING This function allows you to set the type of originals (1-sided, 2-sided or book-type) and the desired type of copying (1-sided or 2-sided). Original Copy *, , and require the optional automatic duplexing unit to be installed. * and require the optional reversing automatic document feeder to be installed. Downloaded From ManualsPrinter.com Manuals EDIT MENU 1-Sided Originals > 2-Sided Copies There are two methods of making duplexed copies from single-sided originals: Using the automatic document feeder (optional) or reversing automatic document feeder (optional) - For duplex-copying from sheet originals of the specified sizes and weights. Setting originals on the glass - For duplex-copying from originals that cannot be handled by the automatic document feeder (optional) or the reversing automatic document feeder (optional). Note This copying mode requires the automatic duplexing unit (optional) to be installed. 1. DUPLEX COPYING (Cont.) When using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (optional) 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “1 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 5 Place the originals on the feed tray. 6 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF DUPLEX 1 Original > Copy 1 > 1 1 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU When Placing the Original on the Glass 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “1 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 5 Place the first page of the originals (first side) on the glass. 6 Press the key. F \(APS\) mode or automatic magnification selection \(AMS\) is selected, a message appears prompting y siz Use the or k Then press the or 7 Place the next original (second side) on the glass. 8 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF 1. DUPLEX COPYING (Cont.) Next original? 1 YES NO DUPLEX 1 Original > Copy 1 > 1 1 > 2 Select original size 1 A4 A3 A4-R A5-R B4 Downloaded From ManualsPrinter.com Manuals EDIT MENU 2-Sided Originals > 2-Sided Copies Placing two sided originals on the re k The or scanned into memor Y 2\) or Note This cop duple 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “2 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, reproduction ratio, image density and copy quantity. The automatic paper selection mode is selected as the def 5 Place the originals on the feed tray. 6 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF 1. DUPLEX COPYING (Cont.) DUPLEX 1 Original > Copy 1 > 2 2 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU This cop 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “BOOK > 2” by pressing the key. 4 Press the key. 7 Specify the Book Margin then press the key, as necessary. Press the or k Each time either of the k incremented or decremented b Press the k k decrement the v Specify the v 6 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF Book-Type Originals > 2-Sided Copies 5 Select the start and end page. Select the desired cop or key RIGHT > RIGHT Cop on a r RIGHT > LEFT Cop on a left page LEFT > LEFT Cop on a left page LEFT > RIGHT Cop on a r 1. DUPLEX COPYING (Cont.) DUPLEX 1 Original > Copy 2 > 1 BOOK > 2 BOOK > 2 1 RIGHT > RIGHT RIGHT > LEFT LEFT > LEFT 8 Press the key. BOOK MARGIN 1 30mm 15mm 8mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 8 Press the key. 2. DUAL PAGE COPYING The f need not mo be copied onto tw Example of Dual P 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display the “DUAL PAGE” in reverse. Then press the key. 3 Press the key and select “ON.” Then press the key Upon selecting “ON”, y the appropr to 30 mm is acceptab When 20 mm is entered, a line that appears at the center of the cop made, a 10 mm margin is estab line When both the Edge Er specified, a bigger v 4 “DUAL PAGE: XXmm” appears. Press the key to return to the initial screen for copying. 5 Select the A4 paper cassette. 6 Place the original on the glass. 7 Select the desired image density, etc. as required. Only 100 % of reproduction r READY 1 DUPLEX :1>1 DUAL PAGE :OFF IMAGE SHIFT :OFF READY 1 DUPLEX :1>1 DUAL PAGE :8mm IMAGE SHIFT :OFF DUAL PAGE 1 OFF ON BOOK MARGIN 1 30mm 8 mm 8mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 7 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 8 Press the key. 4. EDGE ERASE COPYING If the edges of an or Using the edge erase mode the mar to 20 mm. Example of Edge Er 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “Edge Erase.” Then press the key. 3 Press the key and select the “ON.” Then press the key. 4 The current edge erase margin appears on the screen. To change the edge erase margin, select the desired margin by using the or key. Then press the key. The edge er 5 The selected edge erase margin appears on the screen. Press the key to return to the initial screen for copying. 6 Place the original(s) on the feed tray or on the glass. READY 1 DUAL PAGE :OFF IMAGE SHIFT :OFF EDGE ERASE :OFF READY 1 DUAL PAGE :OFF IMAGE SHIFT :OFF EDGE ERASE :10mm EDGE ERASE 1 OFF ON EDGE ERASE 1 20mm 10mm 4mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 5. 2-IN-1/4-IN-1 (Cont.) 5 Select the type of original and copy. 6 Press the key. 7 What is selected appears on the screen. Press the key to return to the initial screen for copying. 8 Select the desired paper cassette, image density, and copy quantity. 9 Press the key. 2IN1 1 Original > Copy 2 > 2 2 > 1 READY 1 IMAGE SHIFT :OFF EDGE ERASE :OFF 2IN1/4IN1 :2IN1(2>1) Note T k and then select the desired paper cassette Downloaded From ManualsPrinter.com Manuals EDIT MENU The magazine sor along the inside as if y Note This copautomatic dupleunit \(optional\) to be installed. Example of magazine sor 6. MAGAZINE SORT 27 188765432145 36 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 3 Press the key to display “ON.” Then press the key. 4 Press the key and specify whether the originals are single-side or duplex. Then press the key. 5 “MAGAZINE SORT: X>2” appears. Press the key to return to the initial screen for copying. 6 Select the desired image density and copy quantity. READY 1 EDGE ERASE :OFF 2IN1/4IN1 :OFF MAGAZINE SORT:OFF READY 1 EDGE ERASE :OFF 2IN1/4IN1 :OFF MAGAZINE SORT:1>2 2 Press the key to display “MAGAZINE SORT.” Then press the key. MAGAZINE SORT 1 OFF ON MAGAZINE SORT 1 Original > Copy 1 > 2 2 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU 9 For the subsequent originals, repeat step 8 above. 10 When scanning of the last original has finished, select “NO.”Next Original? 3 YES NO 11 Press the key. 6. MAGAZINE SORT (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU Tip In the annotation function, pr edge of the paper selected. cop Theref side of the machine 6 Place the original on the glass and press the key.When Placing the Original on the Glass 7 Select “YES,” set the next original and press the key. Next Original? 3 YES NO Next Original? 3 YES NO Memory clear? 3 YES NOWhile the “Ne” screen is being sho the ANNO“YES” or “NO” and press the key 8 For the next and subsequent originals, repeat step 7 above. 9 When the last original is finished being scanned, select “NO.” 10 Press the key. 7. ANNOTATION (Cont.) F \(APS\) mode or automatic magnification selection \(AMS\) is selected, a message appears prompting y siz Use the or k Then press the document. When the first or“Ne Or” screen appears Select original size 1 A4 A3 A4-R A5-R B4 Downloaded From ManualsPrinter.com Manuals EDIT MENU Negative/Positive Reversal This function allo * P Example of negativ 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “EDITING.” Then press the key. 3 Press the key and select “NEG/POS.” Then press the key. 4 “EDITING: NEG/POS” appears. Press the key to return to the initial screen for copying. 5 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 6 Place the original on the glass or the feeder tray and press the key. READY 1 MAGAZINE SORT:OFF ANNOTATION :OFF EDITING :OFF READY 1 MAGAZINE SORT:OFF ANNOTATION :OFF EDITING :NEG/POS EDITING 1 OFF MIRROR NEG/POS 8. EDITING (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU 1 Press the key on the control panel while in the initial screen for copying. 2 Press the key to display the “MIX SIZE”. Then press the key. 3 Press the key to display the “ON”. Then press the key. 4 Select the Automatic paper Selection (APS) mode or Automatic Magnification Selection (AMS) mode. Then select the desired paper cassette, reproduction ratio, image density and copy quantity as required. 5 Place the originals on the original feed tray. 6 Press the key. 10. COPYING MIXED SIZE ORIGINALS Put original in doc. feeder 1 EDITING :OFF BUILD JOB :OFF MIX SIZE :ON A set of or originals all have the same width. Note This copy function requires the optional reversing automatic document feeder \(RADF\) be installed. READY 1 EDITING :OFF BUILD JOB :OFF MIX SIZE :OFF MIXED SIZE ORIGINAL 1 OFF ON Note When the “MIX SIZE” is selected, the “APS” is automatically selected. Downloaded From ManualsPrinter.com Manuals EDIT MENU Recalling a Stored Combination of Copy Modes 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “JOB MEMORY” in reverse. Then press the key. 3 Press the key while “RECALL” is selected. 4 Select the desired Job number from “MEMORY1” to “MEMORY4”. Then press the key. Press the key to return to the initial screen for copying. Tip When the selected memor prog bo 5 Place the original on the glass or the feed tray and press the key. The original is copied in the combination of modes you have recalled. READY 1 EDITING :OFF JOB BUILD :OFF JOB MEMORY JOB MEMORY 1 RECALL MEMORY MEMORY 1 MEMORY1 MEMORY2 MEMORY3 MEMORY4 11. JOB MEMORY (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU 13. MENU LIST 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. Pr’s men READY 1 JOB MEMORY PAPER TYPE :OFF MENU LIST MENU LIST Printing acceptedThe menu list will be pr 2 Press the key to display “MENU LIST.” Then press the key. Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION 1. FINISHING MODE SELECTION Offset Tray (option) When the Offset Tray is configured, the copied set are collated or stacked in groups with each set offset. Job Separator (option) The job separator function allows a copied job and an optional fax job to be output onto separate paper trays. Stapler (option) Sets of copies can be manually stapled when the stapler with work surface is attached. Finisher (option for e-STUDIO20/25 only) When the Finisher is attached, the OFFSET, SORT/OFFSET, and STAPLE functions become available. Tr a y s Paper stopper Note When longer paper, such as Ledger size, is designated to output onto the lower tray, please use the paper stopper attached to the Job Separator. (Do not use the paper stopper attached to the lower tray.) Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION As sets of copies are output, the sets are sorted. Example: Making 5 sets of copies from 5-paper originals *Bypass copying is not possible in the sor t mode. 3. SORT COPYING 1 Place the originals in the feeder. Confirm that “SORT” is shown for “FINISHING.” 2 If “FINISHING:SORT” is not displayed, press the key and select the sort mode. Select “SORT” from the FINISHING menu by pressing the key. Then press the key. 3 Key in the desired copy quantity (sets) using the numeric keys. 4 Select the desired paper cassette, image density and reproduction ratio. 5 Press the key. The copier starts scanning the original. Press the key to stop scanning the original temporarily. Press the key to resume scanning. 54321 54321 54321 54321 54321 54321 Press START to resume 3 PAPER : A4-R :AUTO FINISHING :SORT ZOOM :100% If the stopped, the scanned data is deleted and the sor is ter“YES” or “NO” and press the key When all or star Memory clear? 3 YES NO Tip NON SOR only when the Offset READY 1 FINISHING: NONSORT NONSORT/OFFSET SORT When Using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (optional) Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION 4. OFFSET COPYING When the Offset output in one pile b Example:Making 6 sets of copies from 3-page or \(Bypass cop mode 1 Place the originals in the feeder or on the glass. Select the desired number of copies, image density and reproduction ratio. 3 Select the OFFSET mode. Select “NONSOR” or “SOR” from the FINISHING men k the key 321 111 2 Press the ke“FINISHING” screen appear When the offset tra Remo Remo k contin Ref“NON-SOR COPYING” when “NONSOR” is selected. P Ref“SOR” when “SOR” is selected. P READY 1 FINISHING: NONSORT/OFFSET SORT SORT/OFFSET Downloaded From ManualsPrinter.com Manuals 6-8FINISHING MODE SELECTION When Placing the Original on the Glass 2 Select the “AL” mode Select “AL” from the FINISHING men pressing the k key 3 K ke 4 Select the desired ima ratio. 5 Place the original and press the ke When scanning of the first or“NEXT ORIGINAL?” screen appears 6 Select “YES,” set the ne ke 7 For the ne 6. 8 When the last original has been finished being scanned,“NO” 1 Press the ke“FINISHING” screen appear Copying 3 PAPER : A4 :AUTO FINISHING :ALTERNATION ZOOM :100% The copier star Press the temporar Press START to resume 3 PAPER : A4 :AUTO FINISHING :ALTERNATION ZOOM :100% If the stopped, the scanned data is deleted, and the alter ter“YES” or “NO” and press the key When all or star Memory clear? 3 YES NO Next Original? 3 YES NO 5. READY 1 FINISHING: SORT SORT/OFFSET ALTERNATION Downloaded From ManualsPrinter.com Manuals 6-10FINISHING MODE SELECTION 6. When the optional finisher is installed, y capacity f A4, A4-R, B5 \(30 sheets B4 A3, FOLIO When the optional finisher is installed \(option f ABABAB FinishSet on the A Document FPlaced on the glass 1 Place the originals in the f 3 Select the “ST” mode Select “ST” from the FINISHING men k ke 4 K ke 5 Select the desired ima ratio. 6 Press the ke The copier star each set of copies are ejected. 2 Press the ke“FINISHING” screen appear When Using the A the Rever READY 1 FINISHING:SORT SORT/OFFSET STAPLE Downloaded From ManualsPrinter.com Manuals 6-12FINISHING MODE SELECTION T’s top edge align them to the guide in the diagonal direction. When sets of copies are inser direction v Stapler kit \(KK-1600\) is installed. T in the front. 6. When the optional Stapler kit is installed Downloaded From ManualsPrinter.com Manuals 7-2WHEN THE GRAPHIC SYMBOL FLASHES 1. DESCRIPTION OF THE GRAPHIC SYMBOLS The message display panel shows the status of the copier. When one of the graphic symbols flashes, go to the pages referenced and take the recommended action. Page 7-12 to 23 Page 7-3 Page 7-5 Downloaded From ManualsPrinter.com Manuals 7-4WHEN THE GRAPHIC SYMBOL FLASHES B A 1 Pulling up the grip, draw out the large-capacity feeder carefully until it comes to a stop. 2 Open some paper packages, take out entire reams of paper and set them aligned in tray and tray . When setting the paper to the r aside to the left aside set neatly if y the tr and .\) Be sure that the centre le \(Ref Do not add paper abo Up to 2500 sheets of paper \(recommended b be set. P at first, and when it r mov position . Do not use creased, f per 2. LOADING PAPER (Cont.) Adding Paper to the Large-Capacity Feeder (option for e-STUDIO20/25) 3 Close the cover of the large-capacity feeder. Close the co mo Downloaded From ManualsPrinter.com Manuals 7-6WHEN 4 It is possible that the toner may have become caked in the replacement Toner Cartridge. In order to insure the toner flows smoothly, shake the new Toner Cartridge back and forth several times. 5 Pull the tab or remove the sealing tape from the new cartridge. 6 Install the new Toner Cartridge sliding it into the copier. 7 After installing the Toner Cartridge, move the charger wire cleaning lever (in and out) of the Process Unit several times to clean the charger wire. 3. REPLACING TONER CARTRIDGE (Cont.) Downloaded From ManualsPrinter.com Manuals 7-8WHEN Replacing Process Unit 1 Open the stack feed bypass. 2 Open the automatic duplexing unit by pulling up on the release grip. (Not all copiers are equipped with automatic duplexing units.) 3 Open the side cover of the copier. 4. REPLACING PROCESS UNIT Note Do not e sunlight or touch the dr The Process Unit requires replacement when the “Dr” is displa Tip When “Dr” is displa cop“Replace process unit” and the copier stops Downloaded From ManualsPrinter.com Manuals 7-10WHEN 4. REPLACING PROCESS UNIT (Cont.) 11 Pull the tab to remove the sealing tape from the Process Unit. Important Ne of the Process Unit. will cause pr Do not e Unit to light f be left an with cloth, paper 12 Insert the new Process Unit all the way into the copier. Then install the Toner Cartridge by reversing the removal procedure. Alw touch the g out of the copier f 13 After installing the Toner Cartridge, move the charger wire cleaning lever (in and out) of the Process Unit several times to clean the charger wire. 9 Discard the used Process Unit properly. 10 Open the package and take the new Process Unit out. 8 Grasping the colored handle on top of the Process Unit, remove the Process Unit from the copier. 14 Close the covers opened during this procedure and latch the deplexing unit into position (if attached). Downloaded From ManualsPrinter.com Manuals 7-12WHEN 5. CLEARING PAPER JAM Remo Use the f the Re jammed in the A remo 1 Press the button to unlock and open the cover. Paper Misfeeds in the Reversing Automatic Document Feeder (optional) When a paper misf appears: An illustr or k Misf xxxx represents the position where the tr to the f Misfeed in copier Open side cover of the copier. 1/ 4 Downloaded From ManualsPrinter.com Manuals 7-14WHEN 5. CLEARING PAPER JAM (Cont.) 5 Lift the original tray. When holding the co careful not to get y 8 Lift the reversing automatic document feeder to expose the under side. Then press the blue lever to release the access panel. 6 Remove any misfed originals. 7 Lower the original tray and close the reversing automatic document feeder cover. Downloaded From ManualsPrinter.com Manuals 7-16WHEN 5. CLEARING PAPER JAM (Cont.) 1 Open the side cover. 2 Remove any misfed paper. Then close the cover. Paper Misfeeds in Paper Feed Pedestal (optional) B Paper Misfeed in the Large-Capacity Feeder (option for e-STUDIO20/25) 2 Remove any misfed paper. 1 Open the cover . Downloaded From ManualsPrinter.com Manuals 7-18WHEN 5. CLEARING PAPER JAM (Cont.) 1 Making sure that the stack feed bypass and the automatic duplexing unit are opened, open the side cover.Paper Misfeeds in the Drum/Charger area 2 Press the two blue levers. To release any paper in the fuser unit. Caution As the Fuser Section is heated, pa handling it. 3 Rotate the knob indicated with a blue arrow toward the inside and remove any misfed paper. 4 After clearing all paper, return the two blue levers. Close the exit cover and the right side cover. Return the duplex unit to its normal position (if installed). Downloaded From ManualsPrinter.com Manuals 7-20WHEN 4 Press the two blue levers. To release anypaper in the fuser unit. 5. CLEARING PAPER JAM (Cont.) 5 After clearing paper, return the two blue levers. Close the fuser cover and tighten the two blue screws. Close the exit cover and the right cover. Return the automatic duplexing unit to normal position (if installed). Downloaded From ManualsPrinter.com Manuals 7-22WHEN 5. CLEARING PAPER JAM (Cont.) 2 Remove any misfed paper inside the relay unit. Paper Misfeed in the Relay Unit (option for e-STUDIO20/25) If paper is misf it pushing do Remo easier 1 Holding the cover handle of the relay unit, open it. Downloaded From ManualsPrinter.com Manuals 7-24WHEN 6. ADDING STAPLES Finisher (option for e-STUDIO20/25) 1 By pulling the lever, move the finisher away care- fully from the copier. 4 Remove the empty staple case upward from the staple cartridge. 5 Push in a new staple case into the staple cartridge completely inside until a click is heard. Do not remo case is set in the car 2 Holding the sides of the staple cartridge, slide it out. 3 Turn the staple cartridge upside down. Downloaded From ManualsPrinter.com Manuals 7-26WHEN 6. ADDING STAPLES (Cont.) Be sure to tur 1 Slide forward and lift up the staple cover. 2 Pull out the staple cartridge. 3 Press the cartridge knob to remove the empty staple case. 4 Insert a new staple case into the cartridge. Do not peel off the stic inser Staple kit (option) Downloaded From ManualsPrinter.com Manuals 7-28WHEN 7. REMOVING JAMMED STAPLES Finisher (option for e-STUDIO20/25) 1 Perform steps 1 and 2 of the procedure for “6. ADDING STAPLES Finisher ” ( Page 7-22). 3 Remove any jammed staples using your fingertip or something sharp. 4 Holding the knob, return part to its original position. A A 2 Holding the knob, lower part . 5 Return the staple cartridge to its original position. Inser with a clic 6 Attach the finisher to the copier. Downloaded From ManualsPrinter.com Manuals 7-30WHEN 5 Close the staple cover. 6 Restore power to the copier. Confirm proper operation of the stapler. 7. REMOVING JAMMED STAPLES (Cont.) Downloaded From ManualsPrinter.com Manuals 7-32WHEN 9. PERIODIC MAINTENANCE Note When the either of the following messages appears on the message display: Time f Maintenance/Drum This indicates that assistance from a qualified service technician is required. Call for service.or Downloaded From ManualsPrinter.com Manuals 9-2MAINTENANCE 1. DAILY INSPECTION Items to inspect every morning Power switch ON/OFF status We recommend turning the power switch ON at startup every morning so that copies can be made whenever you want. Also, make sure that you turn the power switch OFF when you leave the office. Items to inspect once a week Cleaning the Original Cover Clean the original cover or the back of the automatic document feeder (optional) or reversing automatic document feeder (optional) with alcohol or a well-squeezed soft cloth moistened with a neutral detergent. Then dry with a soft cloth. Cleaning the Automatic Document Feeder (optional) or Reversing Automatic Document Feeder (optional) Clean the automatic document feeder (optional) roller or reversing automatic document feeder (optional) roller with alcohol or a soft cloth moistened with a neutral detergent. Make sure that the soft cloth is squeezed well. Then dry with a soft cloth. Note Before cleaning the copier, be sure to turn OFF power switch. Please be careful not to scratch the glass surface or back of the cover, when cleaning it. Cleaning the Original Glass Clean the original glass scanning glass of the auto document feeder and scale with a soft cloth moistened with cleaning liquid. Then dry with a soft cloth. Downloaded From ManualsPrinter.com Manuals 9-4MAINTENANCE Cleaning the transfer charger wire 1 Making sure that the stack feed bypass and the automatic duplexing unit (if installed) are opened, open the side cover. 2 Clean the transfer charger wire using the attached charger cleaning accessory. 3 Close the side cover, automatic duplexing unit and stack feed bypass. 2. CLEANING THE WIRE (Cont.) When any of the following is generated on the copy, clean the transfer charger wire. White lines in the direction of paper feed. Uneven tone or dim images. BE SURE TO TURN OFF THE POWER before cleaning the transfer charger wire. Downloaded From ManualsPrinter.com Manuals 9-6MAINTENANCE 3. SIMPLE TROUBLE SHOOTING (Cont.) Copies are stained Countermeasure Close the cover firmly to shut out any external light. Clean the original glass with a cloth moistened with cleaning liquid. Then wipe it with a dry cloth. Clean the original cover with a cloth moistened with a neutral detergent. Then wipe the detergent completely off with a dry cloth. Set the image density properly. Reference page _ 9-2 9-2 3-12 Items to be checked Is the original cover firmly closed? Is the original glass dirty? Is the original cover dirty? Is the image density set properly? Countermeasure Replace the toner cartridge. Set the image density properly. Reference page 7-4 3-12 Items to be checked Has the message “Toner empty” appeared on the screen? Is the image density set properly? Countermeasure Set the image density properly.Reference page 3-12Items to be checked Is the image density set properly? Copy density is too low Copy density is too high Downloaded From ManualsPrinter.com Manuals 9-8MAINTENANCE Downloaded From ManualsPrinter.com Manuals 10-2SPECIFICATIONS & OPTIONS 1. e-STUDIO16/20/25 SPECIFICATIONS Model Name Body Type Copying System Original Glass Original Cover (Platen Cover) Frame Structure Photosensor Type Original Scanning System Resolution Scanning Data Output System Image Memory Maximum Original Capacity (with max. image memory installed) * Acceptable Originals Acceptable Copy Paper Size Warm-up Time First Copy Time Multiple Copying Reproduction Ratio Paper Supply Copy Density Adjustment Power Requirement/ Power Consumption Dimensions (Main Body only) Weight (Main Body only) DP1600/2000/2500 Desktop type Indirect electrophotographic method Fixed (original referenced to top left, referenced to center when using the Automatic Document Feeder or the Reversing Automatic Document Feeder) Option Fixed frame method OPC drum CCD sensor (7450 pixels) 600 x 600 dpi One Scan Multi-Copying Sort memory : (Std.) 8 MB (Max.) 136 MB Single sided : 250 sheets Double sided : 125 sheets Sheets, books and three-dimensional objects Automatic feeding : A3 to A5-R Manual feeding : A3 to A5-R 60 sec. or less (e-STUDIO16), 70 sec. or less (e-STUDIO20/25) 7.9 sec. or less (e-STUDIO16), 6.0 sec. or less (e-STUDIO20/25) Up to 999 copies (numeric key entry) Preset ratio : 50, 71, 82, 141, 200% Zoom : 50 to 200% (e-STUDIO16), 25 to 400% (e-STUDIO20/25)** (in 1% increments) Cassette: 64 to 80 g/m 2 550 sheets (Height of 60.5 mm or less when loaded) Automatic plus manual selection from 7 steps 220-240 VAC, 50/60 Hz 1.4 KW or less (e-STUDIO16), 1.7 KW or less (e-STUDIO20/25) 110-127 VAC, 50/60 Hz 1.4 KW or less (for Saudi Arabia 100V version only) 530 mm (W) x 554 mm (D) x 600 mm (H) Applox. 50 kg Specifications and appearance are subject to change without notice. * Requires optional memory and varies depending upon originals used and amount of memory installed. ** When the original is scaned in the automatic document feeder (optional) or reversing automatic document feeder (optional), the reproduction ratio of 50% to 200% can be specified. Downloaded From ManualsPrinter.com Manuals 10-4SPECIFICATIONS & OPTIONS Automatic Duplexing Unit Model Name Acceptable Originals Power Source Dimensions Weight MD-0101 Maximum A3 Minimum A5-R Paper weight 64 to 80 g/m2 Supplied from the copier 101 mm (W) x 488 mm (D) x 345 mm (H) Approx. 4.3 kg Paper Feed Unit Model Name Acceptable Paper Size Acceptable Paper Weight Cassette Capacity Power Source Dimensions Weight MY-1015 A3, A4, FOLIO, A4-R, B4, A5-R, LT, LT-R 64 to 80 g/m2 550 sheets (Height of 60.5 mm or less when loaded) Supplied from the copier 530 mm (W) x 536 mm (D) x 112 mm (H) Approx. 7.7 kg Paper Feed Pedestal/Large-capacity Feeder (for e-STUDIO20/25 only) Model Name Type Number of Cassettes Acceptable Paper Size Acceptable Paper Weight Cassette Capacity Power Source Dimensions Weight KD-1009 (Paper Feed Pedestal) Console Type One A3, A4, FOLIO, A4-R, B4, A5-R, LT, LT- R 64 to 80 g/m2 550 sheets (Height of 60.5 mm or less when loaded) Supplied from the copier Approx. 17 kg 2. SPECIFICATION OF OPTIONS (Cont.) Specifications and appearance are subject to change without notice. KD-1010 (Large-capacity feeder) A4 2500 sheeets Approx. 23 kg 530 mm (W) x 536 mm (D) x 305 mm (H) Downloaded From ManualsPrinter.com Manuals 10-6SPECIFICATIONS & OPTIONS Stack Feed Bypass Model Name Acceptable Paper Loading Capacity Power Source Dimensions Weight MY-1016 Continuous feed: 64 to 80 g/m 2 Single sheet feed: 80 to 163 g/m2 100 sheets (Height of 16 mm or less when loaded) Supplied from the copier 485.1 mm (W) x 119.6 mm (D) x 227.4 mm (H) Approx. 2.6 kg Stapler Model Name Type of Stapling Number of Sheet Stapled Staple Capacity Power Source Dimensions Weight KK-1600 Flat Clinch Method Up to 50 sheets of 52 to 80 g/m 2 paper Up to 48 sheets of 52 to 80 g/m 2 paper + 2 sheets of 200 g/m2 paper Paper thickness: Max. 5.5 mm 5000 staples Supplied from the copier 257 mm (W) x 423 mm (D) x 173 mm (H) Approx. 3.4 kg 2. SPECIFICATION OF OPTIONS (Cont.) Finisher (for e-STUDIO20/25 only) MJ-1011 A3, A4, A4-R, A5-R, B4, B5, B5-R 60 to 80 g/m2 30 sheets (A4, A4-R, B5, LT, LT- R) 20 sheets (B4) 15 sheets (A3) Rear Supplied from the copier 431 mm (W) x 541 mm (D) x 413 mm (H) Approx. 18.6 kg *Specifications and appearance are subject to change without notice. Model Name Copy Size Paper Thickness Number of Copies Staple at a Time (64 to 80 g/m 2) Stapling Position Power Source Dimensions Weight Downloaded From ManualsPrinter.com Manuals 10-8SPECIFICATIONS & OPTIONS 4. COPY FUNCTION COMBINATION MATRIX e-STUDIO16/20/25 Copy Function Combination Table The reason why the combination is not available.*1When 2nd function is programmed, the 1st function is cleared. *2When 2nd function is programmed, the magnification ratio is reset to 100%. *3When 2nd function is programmed, the magnification ratio is reset to 100% and the Paper-Auto function is selected automatically. *4When 2nd function is programmed, the Lighten/Darken is reset to “Auto” mode. *5It is impossible to change the magnification ratio manually. *6When 2nd function is programmed, the Paper-Auto is reset and A4 or LT size paper is selected automatically. *7The annotation is added only on the leading edge of copy output in transportation direction. Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 No No No No No No No Yes *F Ye s Ye s Ye s No *1 No No No Ye s No *5 Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Ye s No *5 No *5 Yes *A Yes *A Ye s Ye s Ye s Ye s No *1 Ye s Ye s Ye s No Ye s No Zoom (Manual) *BLight/Dark(Auto/Manu) Dual Page Edge Erase *C Image Shift *D APS AMS Text Mode Photo Mode Text/Photo Sort Sort-Offset Offset Magazine Sort2-in-1/4-in-1(Include Duplex) Page Number Page Number & Date 1->2 2->1 2->2Bypass(Undefined Size) X-Y Zoom Neg/Pos Mirror Alternation Book -> 2 Staple Mix Size 2nd FunctionOffsetSort-OffsetSortText/PhotoPhoto ModeText ModeAMSAPSImage Shift *DEdge Erase *CDual PageLighter/Dark(Auto Manu) Zoom (Manual) *B Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *2 Ye s Ye s No No *6 No *1 *2 Ye s Ye s Ye s Ye s Ye s No No No No *7 No *7 Ye s No No No No *2 No No Ye s No Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s No No Ye s Ye s Ye s Ye s No Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No No No Ye s Ye s No *2 Ye s No Ye s Ye s No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s*F No *1 Ye s Ye s No No Ye s Ye s No *2 Ye s No Ye s Ye s No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s*F No *1 Ye s Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Yes *E Yes *E Yes *E Yes *E Yes *E Yes *E Yes *E Yes *F Ye s No No No *1 Yes *E No Yes *E Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *F Ye s No No No *1 Ye s No Ye s 1st Function Downloaded From ManualsPrinter.com Manuals 10-10SPECIFICATIONS & OPTIONS Downloaded From ManualsPrinter.com Manuals
4-5 1 2 3 4 5 6 7 9 10 11 128How to place originals When placing originals vertically: Align the edges of the originals and set them all in the same direction (top to bottom). When placing originals horizontally: Arrange the originals so that the odd and even pages are placed alternately in opposite directions, and then set them in the automatic document feeder (optional) or the reversing au- tomatic document feeder (optional). 5 4 3 2 1 5 4 3 2 1 TOP TOP TOP TOP TOP TOP TOP TOP TOP TOP Downloaded From ManualsPrinter.com Manuals
1 2 3 4 5 6 7 9 10 11 128 1-2BEFORE MAKING COPIES 1. DESCRIPTION OF THE OPTIONAL EQUIPMENT Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011) Stapler (KK-1600) Job separator (MJ-5001) Offset tray (MJ-5002) Automatic duplexing unit (MD-0101) Stack feed bypass (MY-1016) Paper feed unit (MY-1015) Paper feed pedestal (KD-1009) e-STUDIO16 e-STUDIO20/25 Stapler (KK-1600) Automatic duplexing unit (MD-0101) Stack feed bypass (MY-1016) Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011) Finisher including Transportation bridge (MJ-1011)* (e-STUDIO20/25 only) Paper feed unit (MY-1015) Large Capacity Feeder (KD-1010)** (e-STUDIO20/25 only) * The Job separator (MJ-5001) or Offset tray (MJ-5002) can be installed in place of the Finisher. ** The Paper feed pedestal (KD-1009) can be installed in place of the Large capacity feeder (KD-1010). Furthermore, the Cassette module (MY-1017) (option for e-STUDIO20/25) can be installed in KD- 1009. Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Control Panel IMAGE MODE You can switch between the image modes (Text, Text/Photo and Photo) for copying. The lamp of the currently selected image mode illuminates. Message Display Panel Displays the copier conditions, operating procedures, and various instructions and information to the user in text and graphics. LIGHT/DARK Use this key when making a copy to specify the copy density. PAPER SUPPLY You can specify from which paper cassette you would like to feed paper for making a copy. ZOOM You can specify the scaling factor for copying. FINISHING You can specify how you would like to output copies (including Sort and Offset). COPY Press this key to switch from the other modes to the COPY mode. This manual describes the settings and operation in the COPY mode in detail. Paper Jam Lamp This lamp blinks when an original or copy paper is jammed. Recording Paper Lamp This lamp blinks in the COPY mode when no paper is loaded in the selected paper cassette. Toner Lamp This lamp illuminates when the toner is about to run out or runs out completely. PC Communication Lamp This lamp is not used in the COPY mode. This lamp blinks while the copier is serving as a printer and communicating with your computer, while it is printing out in the PRINTER mode, or while it is communicating as a local scanner. FAX Communication Lamp This lamp is not used in the COPY mode. This lamp blinks while the copier is communicating in the FAX mode. 2. DESCRIPTION OF THE DIGITAL COPIER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES When the power is turned on, the following basic screen is shown on the Message Display Panel. (When the copier is controlled using the department code, a different screen is display. Page 1-13) The Message Display Panel indicates the copier’s status. It also illustrates operational procedures or settings using brief sentences or icons. Message Display Panel 2. DESCRIPTION OF THE DIGITAL COPIER (Cont.) Message Copy quantity Light/Dark Zoom Paper size of the currently selected paper source Finishing READY 1 PAPER : A4 :AUTO FINISHING :SORT ZOOM :100% EDIT Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Changing the Paper Size of the Cassette The paper size of the copier’s cassettes can be changed to appropriate paper sizes using the following procedure. 3 Push the right (unlock) side of the size selection lever to unlock it. 4 While pushing the size selection lever in the direction of the arrow, set the side guide to the desired paper width (as indicated on the bottom surface of the cassette). 2 Move the width guide to the desired paper size position (as indicated on the bottom surface of the cassette). 1 Pull the cassette out until it stops. 3. PAPER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES 3. PAPER (Cont.) Turning ON the Power Switch / Auto Job Start Turning On the Power Switch 2 The “Ready” message appears. This message indicates that the copier is ready for operation. Auto Job Start READY 1 PAPER :APS :AUTO FINISHING :NONSORT ZOOM :100% EDIT While the copier is warming up, place the original on the glass, select the desired copy modes and press the key. Wait warming up:Auto Start When the machine reaches its proper operating temperature, copying will automatically star t. Tip Even after you have pressed the key, you can change the copy modes if copying has not yet started. To cancel the auto job start mode, press the key. 1 Open the power switch cover and turn ON the switch. This message appears on the message display panel of the basic screen : Please wait Wait warming up Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES 7 Repeat steps 4 to 6 to specify the paper size for other paper cassettes, as necessary. 8 Press the key to return to the initial screen for copying. 3. PAPER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 1. GENERAL COPYING PROCEDURE When originals are set and the key is pressed with all settings unchanged, copies are made using the initial (default) settings (*1). By selecting various copy modes, you can alter the number and type of copies to be made. 1 Place originals. When placing an original on the glass: Page 2-5 When placing originals facing up in the automatic document feeder (optional) or the reversing automatic document feeder (optional): Page 2-6 The initial (default) settings of the copier at the time of installation are as shown on the right. You can change these initial settings. Page 5-18 *1 The copy modes that are automatically set when the power is turned on or when the key is pressed on the control panel are called the initial (default) settings. Copying Procedure Reproduction ratio ........... 100% Copy quantity ................... 1 Automatic paper selection 1-side copies from 1-side originals Automatic image density Text/photo mode Non-sort mode Initial settings Original scale Original Slide Automatic document feeder Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 2. SETTING ORIGINALS Originals The following specifications apply to originals that can be used with this copier: Remarks Do not place any heavy object (4 kg or over) on the glass. Some of the originals on the left may not be used depending on type or thickness. (For details, consult your service technician.) Some of the originals on the left may not be used depending on paper quality. Maximum number that can be set 50 originals (50 to 80 g/m 2) or stacked height of originals 8 mm or less 100 originals (50 to 80 g/m 2) or stacked height of originals 16 mm or less Size capable of automatic detection Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 (for e-STUDIO20/ 25 only) Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 Types of original Sheets Three-dimensional objects Books Plain paper, thermal paper (for word processor or fax), long originals, originals with filing holes (2-, 3- and 4- holes): 50 to 105 g/m 2 (Multi-sheet feeding) 50 to 127 g/m 2 (1-sheet feeding) Plain paper, thermal paper (for word processor or fax), long originals, originals with filing holes (2-, 3- and 4- holes): 50 to 127 g/m 2 (1-sided original) 50 to 105 g/m 2 (2-sided original) Setting place Glass Automatic document feeder (optional) Reversing automatic document feeder (optional) Maximumsize Width : 302 mm Length : 432 mm Width : 297 mm Length : 432 mm Width : 297 mm Length : 432 mm Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES Using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (option) 2. SETTING ORIGINALS (Cont.) 1 After aligning the edges of the originals well, place them on the original feed tray facing up and align the slides to the width of the originals. Slide Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 3. INTERRUPT COPYING The interrupt copy is a convenient feature that allows the user to pause a job that is currently in progress. 1 Press the key. This message appears: Job interrupted The key illuminates during the INTERRUPT copying. Note One interrupt copy can be made from multiple originals by placing them on the glass one at a time. 2 Place the original. If the previous original remains on the glass, open the original cover or automatic document feeder (optional) or the reversing automatic document feeder (optional) and replace it with the original to be interrupt-copied. 3 Press the key. Repeat steps 2 to 4 if you need to interrupt copying again. 4 After interrupt copying is finished, press the key again. When the following is shown on the Message Display, press the key and perform the interrupted jobs. Ready to resume job. Ready to resume job 3 PAPER :APS :AUTO FINISHING :SORT ZOOM :100% EDIT Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION Automatic Paper Selection (APS) When the power switch is turned ON, the Automatic Paper Selection (APS) mode is selected as the default mode. In this mode, when a regular-sized original is loaded for copying, the copier detects the original size automatically and selects a same paper size as the original size. For the e-STUDIO16, when the original is placed on the glass for copying, the copier cannot detect its size automatically. A message appears prompting the user to specify the size of the original. * This mode can only be used for actual-size (100%) copying. * For automatically selectable original sizes: Page 2-4 1 Check that APS mode is selected in the upper left portion of the Message Display. 4 Enter the desired copy quantity using numeric keys. A copy quantity up to 999 can be keyed in. The copy quantity default is set at one. When an incorrect quantity is set, press the key and key in the correct number. If you press the key, all current copier settings will be cleared, and returned to the default settings. 3 Select desired copy mode. 2 Place the original(s) on the original feed tray or on the glass. READY 1 PAPER :APS :AUTO FINISHING :SORT ZOOM :100% EDIT 5 Press the key. If the following messages are shown; Change the direction of original(s). Change direction of original. Load the cassette containing paper in the same size as the original. Set correct cassette Add paper in the cassette. Add Paper Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION (Cont.) Manual Paper Selection Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with dark borders, or non-regular sized originals such as newspaper and magazines, may be incapable of automatic paper selection. For these types of originals, use the manual paper selection. 1 Press the key with the initial screen shown in the COPY mode. 2 Use the or keys and select the paper cassette that you would like to feed paper from. Please note that the cassettes must be pre-defined with the size of paper loaded. Page 1-8 3 Place the original(s) on the original feed tray or on the glass. (“Setting Original”. Page 2-4) 4 Select desired copy mode and quantity as required. 5 Press the key. READY 1 PAPER APS SUPPLY: :A4 :B4 Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION (Cont.) 5 Enter the desired copy quantity using the numeric keys. 6 Press the key. Tip If the paper misfeeds in the bypass and the Paper Jam Lamp flashes, remove the sheets from the bypass and replace them. Page 7-14. If the size of paper to be loaded is not identical to one specified in the default setting, the default settings must be reset. Page 1-11. Downloaded From ManualsPrinter.com Manuals BASIC MENU 2. REDUCTION AND ENLARGEMENT COPYING There are four methods available for enlargement and reduction copying. Using Automatic Magnification Selection (AMS): After selecting the AMS mode and copy size, the copier automatically detects the size of the original and calculates the appropriate reproduction ratio. For the e-STUDIO16, when the original is scanned on the glass, the user must to manually specify the size of the original. REDUCE/ENLARGE: When a regular-sized original and copy paper are used, select a ratio corresponding to the paper size. Selectable Ratio: Using Automatic Magnification Selection (AMS) 1 Press the key. ZOOM UP/DOWN: The Down and Up arrow keys select the desired reproduction ratio at 1% increments. XY ZOOM: This function allows you to alter the reproduction ratio in the X and Y directions of your copies. * Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with dark borders, or non-regular sized originals such as newspaper and magazines, may be incapable of automatic magnification selection. For these types of originals, use the reduction/enlargement modes. Ratio 50% 71% 82% 141% 200% Original/Copy A3/A5-R A3/A4-R, A4-R/A5-R, B4/B5-R B4/A4-R, B5-R/A5-R A4-R/A3, A5-R/A4-R, A5/A4, B5-R/B4 A5-R/A3 Downloaded From ManualsPrinter.com Manuals BASIC MENU 2. REDUCTION AND ENLARGEMENT COPYING (Cont.) Reduce/Enlarge 5 Place the original to be copied in the feeder or on the glass, key in the copy quantity, and press the key. 1 Select the appropriate paper cassette. (Manual Paper Selection Page 3-3.) 2 Press the key or key. Press the key and go to step 3, or press the key and go to step 4. 3 Use the or keys and select “REDUCE/ ENLARGE.” Press the key. 4 Select the desired reproduction ratio using the or key. Press the key. You must to manually specify the size of the original. READY 1 PAPER : A4 :AUTO FINISHING :SORT ZOOM :65% EDIT When a regular-sized original and copy paper are used, select a ratio corresponding to them. READY 1 ZOOM: 100% AMS REDUCE/ENLARGE ZOOM 1 REDUCE 50% A3 > A5 /ENLARGE: 71% A3 > A4 82% B4 > A4 141% A4 > A3 200% A5 > A3 Downloaded From ManualsPrinter.com Manuals BASIC MENU X-Y Zoom This function allows you to alter the reproduction ratio in the X and Y directions of your copies. 1 Press the key on the control panel. 2 Press the key to display “XY ZOOM.” Then press the key. 3 Specify the X and Y reproduction ratios. Select the X or Y direction using the or key and specify the reproduction ratio using the or key. Then press the key to accept the reproduction ratio. When the original is scanned on the original glass, the reproduction ratio can be specified to 50 % to 200 % for the e-STUDIO16, and 25 % to 400 % for the e-STUDIO20/25. When the original is scanned in the automatic document feeder (optional) or reversing automatic document feeder (optional), the reproduction ratio of 50 % to 200 % can be specified. 4 “Xxxx-Yxxx%” appears next to zoom on the display. 5 Select the desired paper cassette, image density and copy quantity. 6 Place the original on the glass or the feed tray and press the key. READY 1 ZOOM: REDUCE/ENLARGE ZOOM UP/DOWN XY ZOOM ZOOM 1 XY ZOOM: 200% X 100 % - Y 99 % 50% READY 1 PAPER : A4 :AUTO FINISHING :SORT ZOOM :X100-Y99% EDIT 100%200% 100% 200% 2. REDUCTION AND ENLARGEMENT COPYING (Cont.) Downloaded From ManualsPrinter.com Manuals BASIC MENU 3 Press the or key to select the desired image density. To produce lighter copies, press the key. Each time you press the key, the density-indicating mark moves one step to the left and your copies are produced proportionally lighter. To produce darker copies, press the key. Each time you press the key, the density-indicating mark moves one step to the right and your copies are produced proportionally darker. 4 When the key is pressed after density is set, the screen returns to the initial screen for copying. The specified copying density appears on the message display. 5 Place the original to be copied in the feeder or glass and press the key. Copies are made in the selected image density. LIGHT/DARK 1 MANUAL: -3-2-10+1+2+3 READY 1 PAPER : A4 : 2 FINISHING :SORT ZOOM :100% EDIT 3. COPYING WITH COPY DENSITY SELECTION (Cont.) Downloaded From ManualsPrinter.com Manuals BASIC MENU Downloaded From ManualsPrinter.com Manuals EDIT MENU 1. DUPLEX COPYING This function allows you to set the type of originals (1-sided, 2-sided or book-type) and the desired type of copying (1-sided or 2-sided). Original Copy *, , and require the optional automatic duplexing unit to be installed. * and require the optional reversing automatic document feeder to be installed. Downloaded From ManualsPrinter.com Manuals EDIT MENU 1-Sided Originals > 2-Sided Copies There are two methods of making duplexed copies from single-sided originals: Using the automatic document feeder (optional) or reversing automatic document feeder (optional) - For duplex-copying from sheet originals of the specified sizes and weights. Setting originals on the glass - For duplex-copying from originals that cannot be handled by the automatic document feeder (optional) or the reversing automatic document feeder (optional). Note This copying mode requires the automatic duplexing unit (optional) to be installed. 1. DUPLEX COPYING (Cont.) When using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (optional) 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “1 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 5 Place the originals on the feed tray. 6 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF DUPLEX 1 Original > Copy 1 > 1 1 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU When Placing the Original on the Glass 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “1 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 5 Place the first page of the originals (first side) on the glass. 6 Press the key. For the e-STUDIO16, when the automatic paper selection (APS) mode or automatic magnification selection (AMS) is selected, a message appears prompting you to specify the size of the original that you would like to copy. Use the or key to specify the size of the original. Then press the key. The copier will start scanning the original. 7 Place the next original (second side) on the glass. 8 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF 1. DUPLEX COPYING (Cont.) Next original? 1 YES NO DUPLEX 1 Original > Copy 1 > 1 1 > 2 Select original size 1 A4 A3 A4-R A5-R B4 Downloaded From ManualsPrinter.com Manuals EDIT MENU 2-Sided Originals > 2-Sided Copies Placing two sided originals on the reversing automatic document feeder (optional) and pressing the key feeds the original and scans the first side of the original into memory. The original and the sheet are then turned over automatically and the second side of the original is scanned into memory. Once both sides of all originals are scanned, the desired copies are printed. You can set up to 100 A4 size (64 to 80 g/m 2) originals at a time. Note This copying mode requires the reversing automatic document feeder (optional) and the automatic duplexing unit (optional) to be installed. 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “2 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, reproduction ratio, image density and copy quantity. The automatic paper selection mode is selected as the default mode. 5 Place the originals on the feed tray. 6 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF 1. DUPLEX COPYING (Cont.) DUPLEX 1 Original > Copy 1 > 2 2 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU This copying mode requires the automatic duplexing unit (optional) to be installed. 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “BOOK > 2” by pressing the key. 4 Press the key. 7 Specify the Book Margin then press the key, as necessary. Press the or key to specify the Book Margin. Each time either of the keys is pressed, a value is incremented or decremented by 1mm. Press the key to increment, or key to decrement the value. Specify the value within a range of 8 mm to 30 mm. 6 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF Book-Type Originals > 2-Sided Copies 5 Select the start and end page. Select the desired copy mode using the or key. RIGHT > RIGHT Copying is star ted from a right page of the book and it ends on a right page. RIGHT > LEFT Copying is star ted from a right page of the book and it ends on a left page. LEFT > LEFT Copying is started from a left page of the book and it ends on a left page. LEFT > RIGHT Copying is started from a left page of the book and it ends on a right page. 1. DUPLEX COPYING (Cont.) DUPLEX 1 Original > Copy 2 > 1 BOOK > 2 BOOK > 2 1 RIGHT > RIGHT RIGHT > LEFT LEFT > LEFT 8 Press the key. BOOK MARGIN 1 30mm 15mm 8mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 8 Press the key. 2. DUAL PAGE COPYING The facing pages of a book or magazine are copied one at a time onto two separate sheets of paper. You need not move the original on the glass. Two A4 size originals placed side by side on the glass can also be copied onto two separate sheets of paper. Example of Dual Page Copying 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display the “DUAL PAGE” in reverse. Then press the key. 3 Press the key and select “ON.” Then press the key Upon selecting “ON”, you are given an opportunity to select the appropriate book margin. Any value ranging from 8 mm to 30 mm is acceptable. When 20 mm is entered, a line that appears at the center of the copy is masked in a range of 20 mm. When a copy is made, a 10 mm margin is established on both sides of the line. When both the Edge Erase width and the Book Margin are specified, a bigger value would be specified for the margin. 4 “DUAL PAGE: XXmm” appears. Press the key to return to the initial screen for copying. 5 Select the A4 paper cassette. 6 Place the original on the glass. 7 Select the desired image density, etc. as required. Only 100 % of reproduction ratio is acceptable. READY 1 DUPLEX :1>1 DUAL PAGE :OFF IMAGE SHIFT :OFF READY 1 DUPLEX :1>1 DUAL PAGE :8mm IMAGE SHIFT :OFF DUAL PAGE 1 OFF ON BOOK MARGIN 1 30mm 8 mm 8mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 7 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 8 Press the key. 4. EDGE ERASE COPYING If the edges of an original are torn or dirty, they are reproduced as black stains on the copy. Using the edge erase mode, a white border will be created along the outside edges of the copy eliminating the marks. The default edge erase margin is 10 mm, but you can select any margin within the range of 4 to 20 mm. Example of Edge Erase Copying 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “Edge Erase.” Then press the key. 3 Press the key and select the “ON.” Then press the key. 4 The current edge erase margin appears on the screen. To change the edge erase margin, select the desired margin by using the or key. Then press the key. The edge erase margin changes at increments of 1 mm. 5 The selected edge erase margin appears on the screen. Press the key to return to the initial screen for copying. 6 Place the original(s) on the feed tray or on the glass. READY 1 DUAL PAGE :OFF IMAGE SHIFT :OFF EDGE ERASE :OFF READY 1 DUAL PAGE :OFF IMAGE SHIFT :OFF EDGE ERASE :10mm EDGE ERASE 1 OFF ON EDGE ERASE 1 20mm 10mm 4mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 5. 2-IN-1/4-IN-1 (Cont.) 5 Select the type of original and copy. 6 Press the key. 7 What is selected appears on the screen. Press the key to return to the initial screen for copying. 8 Select the desired paper cassette, image density, and copy quantity. 9 Press the key. 2IN1 1 Original > Copy 2 > 2 2 > 1 READY 1 IMAGE SHIFT :OFF EDGE ERASE :OFF 2IN1/4IN1 :2IN1(2>1) Note To select the paper cassette, press the key, select AMS and then select the desired paper cassette. Downloaded From ManualsPrinter.com Manuals EDIT MENU The magazine sort mode allows you to copy and sort originals so that the copies can be folded in half along the inside as if you were making a magazine. Note This copying mode requires the optional automatic duplexing unit (optional) to be installed. Example of magazine sort 6. MAGAZINE SORT 27 188765432145 36 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 3 Press the key to display “ON.” Then press the key. 4 Press the key and specify whether the originals are single-side or duplex. Then press the key. 5 “MAGAZINE SORT: X>2” appears. Press the key to return to the initial screen for copying. 6 Select the desired image density and copy quantity. READY 1 EDGE ERASE :OFF 2IN1/4IN1 :OFF MAGAZINE SORT:OFF READY 1 EDGE ERASE :OFF 2IN1/4IN1 :OFF MAGAZINE SORT:1>2 2 Press the key to display “MAGAZINE SORT.” Then press the key. MAGAZINE SORT 1 OFF ON MAGAZINE SORT 1 Original > Copy 1 > 2 2 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU 9 For the subsequent originals, repeat step 8 above. 10 When scanning of the last original has finished, select “NO.”Next Original? 3 YES NO 11 Press the key. 6. MAGAZINE SORT (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU Tip In the annotation function, printing is performed along the lead- edge of the paper selected. This may be the top or the side of copy depending upon the orientation of the copy paper. Therefore, place the original with its top facing the paper output side of the machine. 6 Place the original on the glass and press the key.When Placing the Original on the Glass 7 Select “YES,” set the next original and press the key. Next Original? 3 YES NO Next Original? 3 YES NO Memory clear? 3 YES NOWhile the “Next Original?” screen is being shown, if the key is pressed, the scanned data is deleted, and the ANNOTAION is terminated. Select “YES” or “NO,” and press the key. 8 For the next and subsequent originals, repeat step 7 above. 9 When the last original is finished being scanned, select “NO.” 10 Press the key. 7. ANNOTATION (Cont.) For the e-STUDIO16, when the automatic paper selection (APS) mode or automatic magnification selection (AMS) is selected, a message appears prompting you to specify the size of the original that you would like to copy. Use the or key to specify the size of the original. Then press the key. The copier will start scanning the document. When the first original has been scanned, the “Next Original?” screen appears. Select original size 1 A4 A3 A4-R A5-R B4 Downloaded From ManualsPrinter.com Manuals EDIT MENU Negative/Positive Reversal This function allows you to reverse the black areas on the original as white areas, or vice versa. * This function is not available with Edge Erase, Sort, Alternation, Duplex copying, Srot/Offset, Dual Page, 2-in-1/4-in-1, Magazine Sort and Book > 2. Example of negative/positive reversal 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “EDITING.” Then press the key. 3 Press the key and select “NEG/POS.” Then press the key. 4 “EDITING: NEG/POS” appears. Press the key to return to the initial screen for copying. 5 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 6 Place the original on the glass or the feeder tray and press the key. READY 1 MAGAZINE SORT:OFF ANNOTATION :OFF EDITING :OFF READY 1 MAGAZINE SORT:OFF ANNOTATION :OFF EDITING :NEG/POS EDITING 1 OFF MIRROR NEG/POS 8. EDITING (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU 1 Press the key on the control panel while in the initial screen for copying. 2 Press the key to display the “MIX SIZE”. Then press the key. 3 Press the key to display the “ON”. Then press the key. 4 Select the Automatic paper Selection (APS) mode or Automatic Magnification Selection (AMS) mode. Then select the desired paper cassette, reproduction ratio, image density and copy quantity as required. 5 Place the originals on the original feed tray. 6 Press the key. 10. COPYING MIXED SIZE ORIGINALS Put original in doc. feeder 1 EDITING :OFF BUILD JOB :OFF MIX SIZE :ON A set of originals with different paper sizes can be copied together in the same operation, as long as the originals all have the same width. Note This copy function requires the optional reversing automatic document feeder (RADF) be installed. READY 1 EDITING :OFF BUILD JOB :OFF MIX SIZE :OFF MIXED SIZE ORIGINAL 1 OFF ON Note When the “MIX SIZE” is selected, the “APS” is automatically selected. Downloaded From ManualsPrinter.com Manuals EDIT MENU Recalling a Stored Combination of Copy Modes 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “JOB MEMORY” in reverse. Then press the key. 3 Press the key while “RECALL” is selected. 4 Select the desired Job number from “MEMORY1” to “MEMORY4”. Then press the key. Press the key to return to the initial screen for copying. Tip When the selected memory location contains a pre- programmed job, the Job Memory icon is highlighted with a box. 5 Place the original on the glass or the feed tray and press the key. The original is copied in the combination of modes you have recalled. READY 1 EDITING :OFF JOB BUILD :OFF JOB MEMORY JOB MEMORY 1 RECALL MEMORY MEMORY 1 MEMORY1 MEMORY2 MEMORY3 MEMORY4 11. JOB MEMORY (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU 13. MENU LIST 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. Print out the copier’s menu list. READY 1 JOB MEMORY PAPER TYPE :OFF MENU LIST MENU LIST Printing acceptedThe menu list will be printed out. 2 Press the key to display “MENU LIST.” Then press the key. Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION 1. FINISHING MODE SELECTION Offset Tray (option) When the Offset Tray is configured, the copied set are collated or stacked in groups with each set offset. Job Separator (option) The job separator function allows a copied job and an optional fax job to be output onto separate paper trays. Stapler (option) Sets of copies can be manually stapled when the stapler with work surface is attached. Finisher (option for e-STUDIO20/25 only) When the Finisher is attached, the OFFSET, SORT/OFFSET, and STAPLE functions become available. Tr a y s Paper stopper Note When longer paper, such as Ledger size, is designated to output onto the lower tray, please use the paper stopper attached to the Job Separator. (Do not use the paper stopper attached to the lower tray.) Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION As sets of copies are output, the sets are sorted. Example: Making 5 sets of copies from 5-paper originals *Bypass copying is not possible in the sor t mode. 3. SORT COPYING 1 Place the originals in the feeder. Confirm that “SORT” is shown for “FINISHING.” 2 If “FINISHING:SORT” is not displayed, press the key and select the sort mode. Select “SORT” from the FINISHING menu by pressing the key. Then press the key. 3 Key in the desired copy quantity (sets) using the numeric keys. 4 Select the desired paper cassette, image density and reproduction ratio. 5 Press the key. The copier starts scanning the original. Press the key to stop scanning the original temporarily. Press the key to resume scanning. 54321 54321 54321 54321 54321 54321 Press START to resume 3 PAPER : A4-R :AUTO FINISHING :SORT ZOOM :100% If the key is pressed again when scanning has stopped, the scanned data is deleted and the sort copying is terminated. Select “YES” or “NO,” and press the key. When all originals are scanned, the copier automatically starts copying. Copies are outputted in sets. Memory clear? 3 YES NO Tip NON SORT/OFFSET and SORT/OFFSET can be selected only when the Offset Tray or Finisher is installed. READY 1 FINISHING: NONSORT NONSORT/OFFSET SORT When Using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (optional) Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION 4. OFFSET COPYING When the Offset Tray or Finisher is attached, the sets of copies that are collated or stacked in groups are output in one pile but each set is offset, as illustrated. Example:Making 6 sets of copies from 3-page originals. (Bypass copying is not possible in the offset mode.) 1 Place the originals in the feeder or on the glass. Select the desired number of copies, image density and reproduction ratio. 3 Select the OFFSET mode. Select “NONSORT/OFFSET” or “SORT/OFFSET” from the FINISHING menu by pressing the key. Then press the key. 321 111 2 Press the ke“FINISHING” screen appear When the offset tray is full, the following message appears: Remove paper from offset. Remove the copies from the tray and press the key to continue. Refer to the procedures described in “NON-SORT COPYING” when “NONSORT/OFFSET” is selected. Page 6-3 Refer to the procedures described in “SORT COPYING” when “SORT/OFFSET” is selected. Page 6-4 READY 1 FINISHING: NONSORT/OFFSET SORT SORT/OFFSET Downloaded From ManualsPrinter.com Manuals 6-8FINISHING MODE SELECTION When Placing the Original on the Glass 2 Select the “AL” mode Select “ALTERNATION” from the FINISHING menu by pressing the key. Then press the key. 3 K ke 4 Select the desired ima ratio. 5 Place the original and press the ke When scanning of the first original has finished, the “NEXT ORIGINAL?” screen appears. 6 Select “YES,” set the ne ke 7 For the ne 6. 8 When the last original has been finished being scanned,“NO” 1 Press the ke“FINISHING” screen appear Copying 3 PAPER : A4 :AUTO FINISHING :ALTERNATION ZOOM :100% The copier starts scanning the original. Press the key to stop scanning the original temporarily. Press the key to resume scanning. Press START to resume 3 PAPER : A4 :AUTO FINISHING :ALTERNATION ZOOM :100% If the key is pressed again when scanning has stopped, the scanned data is deleted, and the alternation is terminated. Select “YES” or “NO” and press the key. When all originals are scanned, the copier automatically starts copying and collates the copies into sets. Memory clear? 3 YES NO Next Original? 3 YES NO 5. READY 1 FINISHING: SORT SORT/OFFSET ALTERNATION Downloaded From ManualsPrinter.com Manuals 6-10FINISHING MODE SELECTION 6. When the optional finisher is installed, you can use the function that automatically staples Maximum capacity for stapling. A4, A4-R, B5 (LT, LT-R)30 sheets B4 20 sheets A3, FOLIO 15 sheets When the optional finisher is installed \(option f ABABAB FinishSet on the Automatic Document FeederPlaced on the glass 1 Place the originals in the f 3 Select the “ST” mode Select “STAPLE” from the FINISHING menu by pressing the key. Then press the key. 4 K ke 5 Select the desired ima ratio. 6 Press the ke The copier starts copying. In this copying mode, Stapled each set of copies are ejected. 2 Press the ke“FINISHING” screen appear When Using the A the Rever READY 1 FINISHING:SORT SORT/OFFSET STAPLE Downloaded From ManualsPrinter.com Manuals 6-12FINISHING MODE SELECTION To position the staple in parallel with the copy’s top edge, align them to the guide in the diagonal direction. When sets of copies are inserted aligned to the guide, they will be stapled automatically. The stapling direction varies depending on the orientation of the sets. This function is only available when the optional Stapler kit (KK-1600) is installed. To staple sets of copies diagonally, align them to the guide in the front. 6. When the optional Stapler kit is installed Downloaded From ManualsPrinter.com Manuals 7-2WHEN THE GRAPHIC SYMBOL FLASHES 1. DESCRIPTION OF THE GRAPHIC SYMBOLS The message display panel shows the status of the copier. When one of the graphic symbols flashes, go to the pages referenced and take the recommended action. Page 7-12 to 23 Page 7-3 Page 7-5 Downloaded From ManualsPrinter.com Manuals 7-4WHEN THE GRAPHIC SYMBOL FLASHES B A 1 Pulling up the grip, draw out the large-capacity feeder carefully until it comes to a stop. 2 Open some paper packages, take out entire reams of paper and set them aligned in tray and tray . When setting the paper, set the paper for to the right aside, and set it for to the left aside. (The paper can be set neatly if you pile up the paper little by little alternately in the tray and .) Be sure that the centre lever is not open (Refer to the labels attached in the large-capacity feeder). Do not add paper above the line indicated on the guide. Up to 2500 sheets of paper (recommended by Toshiba) can be set. Paper star ts being fed from the elevator tray at first, and when it runs out of paper, the paper on tray moves to the position . Do not use creased, folded, wrinkled or damp sheets of pa- per. 2. LOADING PAPER (Cont.) Adding Paper to the Large-Capacity Feeder (option for e-STUDIO20/25) 3 Close the cover of the large-capacity feeder. Close the cover completely. The elevator tray automatically moves up to the paper feeding position. Downloaded From ManualsPrinter.com Manuals 7-6WHEN THE GRAPHIC SYMBOL FLASHES 4 It is possible that the toner may have become caked in the replacement Toner Cartridge. In order to insure the toner flows smoothly, shake the new Toner Cartridge back and forth several times. 5 Pull the tab or remove the sealing tape from the new cartridge. 6 Install the new Toner Cartridge sliding it into the copier. 7 After installing the Toner Cartridge, move the charger wire cleaning lever (in and out) of the Process Unit several times to clean the charger wire. 3. REPLACING TONER CARTRIDGE (Cont.) Downloaded From ManualsPrinter.com Manuals 7-8WHEN THE GRAPHIC SYMBOL FLASHES Replacing Process Unit 1 Open the stack feed bypass. 2 Open the automatic duplexing unit by pulling up on the release grip. (Not all copiers are equipped with automatic duplexing units.) 3 Open the side cover of the copier. 4. REPLACING PROCESS UNIT Note Do not expose the green drum to light for an extended period. Never expose the drum to direct sunlight or touch the drum surface. Damage or poor print quality may result. The Process Unit requires replacement when the “Drum life warning” is displayed. Tip When “Drum life warning” is displayed, the copier can continue to make copies (1,000 copies). After copying 1,000 sheets, the message changes to “Replace process unit” and the copier stops. Downloaded From ManualsPrinter.com Manuals 7-10WHEN THE GRAPHIC SYMBOL FLASHES 4. REPLACING PROCESS UNIT (Cont.) 11 Pull the tab to remove the sealing tape from the Process Unit. Important Never touch the photoconductive drum (the green surface) of the Process Unit. If the surface is scarred or scratches, it will cause print quality problems. Do not expose the photoconductive drum of the process Unit to light for more than 3 minutes. If the Process Unit is to be left anywhere outside the copier, be certain to cover it with cloth, paper, etc. 12 Insert the new Process Unit all the way into the copier. Then install the Toner Cartridge by reversing the removal procedure. Always hold the Process Unit by the colored handle. Do not touch the green drum area. Do not leave the Process Unit out of the copier for an extended period of time. 13 After installing the Toner Cartridge, move the charger wire cleaning lever (in and out) of the Process Unit several times to clean the charger wire. 9 Discard the used Process Unit properly. 10 Open the package and take the new Process Unit out. 8 Grasping the colored handle on top of the Process Unit, remove the Process Unit from the copier. 14 Close the covers opened during this procedure and latch the deplexing unit into position (if attached). Downloaded From ManualsPrinter.com Manuals 7-12WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM Remove any misfed originals. Use the following procedures to remove an original jammed in the Reversing Automatic Document Feeder (optional). An original jammed in the Automatic Document Feeder (optional) can be removed in the same manner. 1 Press the button to unlock and open the cover. Paper Misfeeds in the Reversing Automatic Document Feeder (optional) When a paper misfeed occurs in the copier, the Paper Jam Lamp flashes and the message below appears: An illustration and short description indicates the procedures to remove jammed paper. Press the or key to scroll through the individual pages of the procedures. Misfeed in xxxx xxxx represents the position where the transfer error occurred. To clear the error for each position, refer to the following pages. Misfeed in copier Open side cover of the copier. 1/ 4 Downloaded From ManualsPrinter.com Manuals 7-14WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM (Cont.) 5 Lift the original tray. When holding the cover to lift up the original tray, please be careful not to get your fingers caught. 8 Lift the reversing automatic document feeder to expose the under side. Then press the blue lever to release the access panel. 6 Remove any misfed originals. 7 Lower the original tray and close the reversing automatic document feeder cover. Downloaded From ManualsPrinter.com Manuals 7-16WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM (Cont.) 1 Open the side cover. 2 Remove any misfed paper. Then close the cover. Paper Misfeeds in Paper Feed Pedestal (optional) B Paper Misfeed in the Large-Capacity Feeder (option for e-STUDIO20/25) 2 Remove any misfed paper. 1 Open the cover . Downloaded From ManualsPrinter.com Manuals 7-18WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM (Cont.) 1 Making sure that the stack feed bypass and the automatic duplexing unit are opened, open the side cover.Paper Misfeeds in the Drum/Charger area 2 Press the two blue levers. To release any paper in the fuser unit. Caution As the Fuser Section is heated, pay special attention when handling it. If hot, allow the fuser to cool prior to touching. 3 Rotate the knob indicated with a blue arrow toward the inside and remove any misfed paper. 4 After clearing all paper, return the two blue levers. Close the exit cover and the right side cover. Return the duplex unit to its normal position (if installed). Downloaded From ManualsPrinter.com Manuals 7-20WHEN THE GRAPHIC SYMBOL FLASHES 4 Press the two blue levers. To release anypaper in the fuser unit. 5. CLEARING PAPER JAM (Cont.) 5 After clearing paper, return the two blue levers. Close the fuser cover and tighten the two blue screws. Close the exit cover and the right cover. Return the automatic duplexing unit to normal position (if installed). Downloaded From ManualsPrinter.com Manuals 7-22WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM (Cont.) 2 Remove any misfed paper inside the relay unit. Paper Misfeed in the Relay Unit (option for e-STUDIO20/25) If paper is misfed at the inner part of the relay unit, remove it pushing down the blue lever. Remove the misfed paper from the fuser unit side if it is easier. 1 Holding the cover handle of the relay unit, open it. Downloaded From ManualsPrinter.com Manuals 7-24WHEN THE GRAPHIC SYMBOL FLASHES 6. ADDING STAPLES Finisher (option for e-STUDIO20/25) 1 By pulling the lever, move the finisher away care- fully from the copier. 4 Remove the empty staple case upward from the staple cartridge. 5 Push in a new staple case into the staple cartridge completely inside until a click is heard. Do not remove the seal holding the staples before the staple case is set in the cartridge. 2 Holding the sides of the staple cartridge, slide it out. 3 Turn the staple cartridge upside down. Downloaded From ManualsPrinter.com Manuals 7-26WHEN THE GRAPHIC SYMBOL FLASHES 6. ADDING STAPLES (Cont.) Be sure to turn off the copier before replacing the staples. 1 Slide forward and lift up the staple cover. 2 Pull out the staple cartridge. 3 Press the cartridge knob to remove the empty staple case. 4 Insert a new staple case into the cartridge. Do not peel off the sticker from the staple case before inserting the staple case into the car tridge. Staple kit (option) Downloaded From ManualsPrinter.com Manuals 7-28WHEN THE GRAPHIC SYMBOL FLASHES 7. REMOVING JAMMED STAPLES Finisher (option for e-STUDIO20/25) 1 Perform steps 1 and 2 of the procedure for “6. ADDING STAPLES Finisher ” ( Page 7-22). 3 Remove any jammed staples using your fingertip or something sharp. 4 Holding the knob, return part to its original position. A A 2 Holding the knob, lower part . 5 Return the staple cartridge to its original position. Insert the cartridge until it is caught by the claw and fixed with a click sound. 6 Attach the finisher to the copier. Downloaded From ManualsPrinter.com Manuals 7-30WHEN THE GRAPHIC SYMBOL FLASHES 5 Close the staple cover. 6 Restore power to the copier. Confirm proper operation of the stapler. 7. REMOVING JAMMED STAPLES (Cont.) Downloaded From ManualsPrinter.com Manuals 7-32WHEN THE GRAPHIC SYMBOL FLASHES 9. PERIODIC MAINTENANCE Note When the either of the following messages appears on the message display: Time for maintenance Maintenance/Drum This indicates that assistance from a qualified service technician is required. Call for service.or Downloaded From ManualsPrinter.com Manuals 9-2MAINTENANCE 1. DAILY INSPECTION Items to inspect every morning Power switch ON/OFF status We recommend turning the power switch ON at startup every morning so that copies can be made whenever you want. Also, make sure that you turn the power switch OFF when you leave the office. Items to inspect once a week Cleaning the Original Cover Clean the original cover or the back of the automatic document feeder (optional) or reversing automatic document feeder (optional) with alcohol or a well-squeezed soft cloth moistened with a neutral detergent. Then dry with a soft cloth. Cleaning the Automatic Document Feeder (optional) or Reversing Automatic Document Feeder (optional) Clean the automatic document feeder (optional) roller or reversing automatic document feeder (optional) roller with alcohol or a soft cloth moistened with a neutral detergent. Make sure that the soft cloth is squeezed well. Then dry with a soft cloth. Note Before cleaning the copier, be sure to turn OFF power switch. Please be careful not to scratch the glass surface or back of the cover, when cleaning it. Cleaning the Original Glass Clean the original glass scanning glass of the auto document feeder and scale with a soft cloth moistened with cleaning liquid. Then dry with a soft cloth. Downloaded From ManualsPrinter.com Manuals 9-4MAINTENANCE Cleaning the transfer charger wire 1 Making sure that the stack feed bypass and the automatic duplexing unit (if installed) are opened, open the side cover. 2 Clean the transfer charger wire using the attached charger cleaning accessory. 3 Close the side cover, automatic duplexing unit and stack feed bypass. 2. CLEANING THE WIRE (Cont.) When any of the following is generated on the copy, clean the transfer charger wire. White lines in the direction of paper feed. Uneven tone or dim images. BE SURE TO TURN OFF THE POWER before cleaning the transfer charger wire. Downloaded From ManualsPrinter.com Manuals 9-6MAINTENANCE 3. SIMPLE TROUBLE SHOOTING (Cont.) Copies are stained Countermeasure Close the cover firmly to shut out any external light. Clean the original glass with a cloth moistened with cleaning liquid. Then wipe it with a dry cloth. Clean the original cover with a cloth moistened with a neutral detergent. Then wipe the detergent completely off with a dry cloth. Set the image density properly. Reference page _ 9-2 9-2 3-12 Items to be checked Is the original cover firmly closed? Is the original glass dirty? Is the original cover dirty? Is the image density set properly? Countermeasure Replace the toner cartridge. Set the image density properly. Reference page 7-4 3-12 Items to be checked Has the message “Toner empty” appeared on the screen? Is the image density set properly? Countermeasure Set the image density properly.Reference page 3-12Items to be checked Is the image density set properly? Copy density is too low Copy density is too high Downloaded From ManualsPrinter.com Manuals 9-8MAINTENANCE Downloaded From ManualsPrinter.com Manuals 10-2SPECIFICATIONS & OPTIONS 1. e-STUDIO16/20/25 SPECIFICATIONS Model Name Body Type Copying System Original Glass Original Cover (Platen Cover) Frame Structure Photosensor Type Original Scanning System Resolution Scanning Data Output System Image Memory Maximum Original Capacity (with max. image memory installed) * Acceptable Originals Acceptable Copy Paper Size Warm-up Time First Copy Time Multiple Copying Reproduction Ratio Paper Supply Copy Density Adjustment Power Requirement/ Power Consumption Dimensions (Main Body only) Weight (Main Body only) DP1600/2000/2500 Desktop type Indirect electrophotographic method Fixed (original referenced to top left, referenced to center when using the Automatic Document Feeder or the Reversing Automatic Document Feeder) Option Fixed frame method OPC drum CCD sensor (7450 pixels) 600 x 600 dpi One Scan Multi-Copying Sort memory : (Std.) 8 MB (Max.) 136 MB Single sided : 250 sheets Double sided : 125 sheets Sheets, books and three-dimensional objects Automatic feeding : A3 to A5-R Manual feeding : A3 to A5-R 60 sec. or less (e-STUDIO16), 70 sec. or less (e-STUDIO20/25) 7.9 sec. or less (e-STUDIO16), 6.0 sec. or less (e-STUDIO20/25) Up to 999 copies (numeric key entry) Preset ratio : 50, 71, 82, 141, 200% Zoom : 50 to 200% (e-STUDIO16), 25 to 400% (e-STUDIO20/25)** (in 1% increments) Cassette: 64 to 80 g/m 2 550 sheets (Height of 60.5 mm or less when loaded) Automatic plus manual selection from 7 steps 220-240 VAC, 50/60 Hz 1.4 KW or less (e-STUDIO16), 1.7 KW or less (e-STUDIO20/25) 110-127 VAC, 50/60 Hz 1.4 KW or less (for Saudi Arabia 100V version only) 530 mm (W) x 554 mm (D) x 600 mm (H) Applox. 50 kg Specifications and appearance are subject to change without notice. * Requires optional memory and varies depending upon originals used and amount of memory installed. ** When the original is scaned in the automatic document feeder (optional) or reversing automatic document feeder (optional), the reproduction ratio of 50% to 200% can be specified. Downloaded From ManualsPrinter.com Manuals 10-4SPECIFICATIONS & OPTIONS Automatic Duplexing Unit Model Name Acceptable Originals Power Source Dimensions Weight MD-0101 Maximum A3 Minimum A5-R Paper weight 64 to 80 g/m2 Supplied from the copier 101 mm (W) x 488 mm (D) x 345 mm (H) Approx. 4.3 kg Paper Feed Unit Model Name Acceptable Paper Size Acceptable Paper Weight Cassette Capacity Power Source Dimensions Weight MY-1015 A3, A4, FOLIO, A4-R, B4, A5-R, LT, LT-R 64 to 80 g/m2 550 sheets (Height of 60.5 mm or less when loaded) Supplied from the copier 530 mm (W) x 536 mm (D) x 112 mm (H) Approx. 7.7 kg Paper Feed Pedestal/Large-capacity Feeder (for e-STUDIO20/25 only) Model Name Type Number of Cassettes Acceptable Paper Size Acceptable Paper Weight Cassette Capacity Power Source Dimensions Weight KD-1009 (Paper Feed Pedestal) Console Type One A3, A4, FOLIO, A4-R, B4, A5-R, LT, LT- R 64 to 80 g/m2 550 sheets (Height of 60.5 mm or less when loaded) Supplied from the copier Approx. 17 kg 2. SPECIFICATION OF OPTIONS (Cont.) Specifications and appearance are subject to change without notice. KD-1010 (Large-capacity feeder) A4 2500 sheeets Approx. 23 kg 530 mm (W) x 536 mm (D) x 305 mm (H) Downloaded From ManualsPrinter.com Manuals 10-6SPECIFICATIONS & OPTIONS Stack Feed Bypass Model Name Acceptable Paper Loading Capacity Power Source Dimensions Weight MY-1016 Continuous feed: 64 to 80 g/m 2 Single sheet feed: 80 to 163 g/m2 100 sheets (Height of 16 mm or less when loaded) Supplied from the copier 485.1 mm (W) x 119.6 mm (D) x 227.4 mm (H) Approx. 2.6 kg Stapler Model Name Type of Stapling Number of Sheet Stapled Staple Capacity Power Source Dimensions Weight KK-1600 Flat Clinch Method Up to 50 sheets of 52 to 80 g/m 2 paper Up to 48 sheets of 52 to 80 g/m 2 paper + 2 sheets of 200 g/m2 paper Paper thickness: Max. 5.5 mm 5000 staples Supplied from the copier 257 mm (W) x 423 mm (D) x 173 mm (H) Approx. 3.4 kg 2. SPECIFICATION OF OPTIONS (Cont.) Finisher (for e-STUDIO20/25 only) MJ-1011 A3, A4, A4-R, A5-R, B4, B5, B5-R 60 to 80 g/m2 30 sheets (A4, A4-R, B5, LT, LT- R) 20 sheets (B4) 15 sheets (A3) Rear Supplied from the copier 431 mm (W) x 541 mm (D) x 413 mm (H) Approx. 18.6 kg *Specifications and appearance are subject to change without notice. Model Name Copy Size Paper Thickness Number of Copies Staple at a Time (64 to 80 g/m 2) Stapling Position Power Source Dimensions Weight Downloaded From ManualsPrinter.com Manuals 10-8SPECIFICATIONS & OPTIONS 4. COPY FUNCTION COMBINATION MATRIX e-STUDIO16/20/25 Copy Function Combination Table The reason why the combination is not available.*1When 2nd function is programmed, the 1st function is cleared. *2When 2nd function is programmed, the magnification ratio is reset to 100%. *3When 2nd function is programmed, the magnification ratio is reset to 100% and the Paper-Auto function is selected automatically. *4When 2nd function is programmed, the Lighten/Darken is reset to “Auto” mode. *5It is impossible to change the magnification ratio manually. *6When 2nd function is programmed, the Paper-Auto is reset and A4 or LT size paper is selected automatically. *7The annotation is added only on the leading edge of copy output in transportation direction. Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 No No No No No No No Yes *F Ye s Ye s Ye s No *1 No No No Ye s No *5 Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Ye s No *5 No *5 Yes *A Yes *A Ye s Ye s Ye s Ye s No *1 Ye s Ye s Ye s No Ye s No Zoom (Manual) *BLight/Dark(Auto/Manu) Dual Page Edge Erase *C Image Shift *D APS AMS Text Mode Photo Mode Text/Photo Sort Sort-Offset Offset Magazine Sort2-in-1/4-in-1(Include Duplex) Page Number Page Number & Date 1->2 2->1 2->2Bypass(Undefined Size) X-Y Zoom Neg/Pos Mirror Alternation Book -> 2 Staple Mix Size 2nd FunctionOffsetSort-OffsetSortText/PhotoPhoto ModeText ModeAMSAPSImage Shift *DEdge Erase *CDual PageLighter/Dark(Auto Manu) Zoom (Manual) *B Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *2 Ye s Ye s No No *6 No *1 *2 Ye s Ye s Ye s Ye s Ye s No No No No *7 No *7 Ye s No No No No *2 No No Ye s No Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s No No Ye s Ye s Ye s Ye s No Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No No No Ye s Ye s No *2 Ye s No Ye s Ye s No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s*F No *1 Ye s Ye s No No Ye s Ye s No *2 Ye s No Ye s Ye s No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s*F No *1 Ye s Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Yes *E Yes *E Yes *E Yes *E Yes *E Yes *E Yes *E Yes *F Ye s No No No *1 Yes *E No Yes *E Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *F Ye s No No No *1 Ye s No Ye s 1st Function Downloaded From ManualsPrinter.com Manuals 10-10SPECIFICATIONS & OPTIONS Downloaded From ManualsPrinter.com Manuals
4-7 1 2 3 4 5 6 7 9 10 11 128 How to place originals on the glass When setting originals vertically: The first side and second side should be placed in the same direction (top to bottom). When setting originals horizontally: The first side and second side should be placed in the oppo- site direction (top to bottom). Vertical placement (First side) (Second side) Horizontal placement (First side) (Second side) 9 Repeat steps 5 to 8 until all the originals are copied. 10 After the last original is scanned, select “NO” with the key and then press the key. Downloaded From ManualsPrinter.com Manuals
1 2 3 4 5 6 7 9 10 11 128 1-2BEFORE MAKING COPIES 1. DESCRIPTION OF THE OPTIONAL EQUIPMENT Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011) Stapler (KK-1600) Job separator (MJ-5001) Offset tray (MJ-5002) Automatic duplexing unit (MD-0101) Stack feed bypass (MY-1016) Paper feed unit (MY-1015) Paper feed pedestal (KD-1009) e-STUDIO16 e-STUDIO20/25 Stapler (KK-1600) Automatic duplexing unit (MD-0101) Stack feed bypass (MY-1016) Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011) Finisher including Transportation bridge (MJ-1011)* (e-STUDIO20/25 only) Paper feed unit (MY-1015) Large Capacity Feeder (KD-1010)** (e-STUDIO20/25 only) * The Job separator (MJ-5001) or Offset tray (MJ-5002) can be installed in place of the Finisher. ** The Paper feed pedestal (KD-1009) can be installed in place of the Large capacity feeder (KD-1010). Furthermore, the Cassette module (MY-1017) (option for e-STUDIO20/25) can be installed in KD- 1009. Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Control Panel IMAGE MODE You can switch between the image modes (Text, Text/Photo and Photo) for copying. The lamp of the currently selected image mode illuminates. Message Display Panel Displays the copier conditions, operating procedures, and various instructions and information to the user in text and graphics. LIGHT/DARK Use this key when making a copy to specify the copy density. PAPER SUPPLY You can specify from which paper cassette you would like to feed paper for making a copy. ZOOM You can specify the scaling factor for copying. FINISHING You can specify how you would like to output copies (including Sort and Offset). COPY Press this key to switch from the other modes to the COPY mode. This manual describes the settings and operation in the COPY mode in detail. Paper Jam Lamp This lamp blinks when an original or copy paper is jammed. Recording Paper Lamp This lamp blinks in the COPY mode when no paper is loaded in the selected paper cassette. Toner Lamp This lamp illuminates when the toner is about to run out or runs out completely. PC Communication Lamp This lamp is not used in the COPY mode. This lamp blinks while the copier is serving as a printer and communicating with your computer, while it is printing out in the PRINTER mode, or while it is communicating as a local scanner. FAX Communication Lamp This lamp is not used in the COPY mode. This lamp blinks while the copier is communicating in the FAX mode. 2. DESCRIPTION OF THE DIGITAL COPIER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES When the power is turned on, the following basic screen is shown on the Message Display Panel. (When the copier is controlled using the department code, a different screen is display. Page 1-13) The Message Display Panel indicates the copier’s status. It also illustrates operational procedures or settings using brief sentences or icons. Message Display Panel 2. DESCRIPTION OF THE DIGITAL COPIER (Cont.) Message Copy quantity Light/Dark Zoom Paper size of the currently selected paper source Finishing READY 1 PAPER : A4 :AUTO FINISHING :SORT ZOOM :100% EDIT Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Changing the Paper Size of the Cassette The paper size of the copier’s cassettes can be changed to appropriate paper sizes using the following procedure. 3 Push the right (unlock) side of the size selection lever to unlock it. 4 While pushing the size selection lever in the direction of the arrow, set the side guide to the desired paper width (as indicated on the bottom surface of the cassette). 2 Move the width guide to the desired paper size position (as indicated on the bottom surface of the cassette). 1 Pull the cassette out until it stops. 3. PAPER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES 3. PAPER (Cont.) Turning ON the Power Switch / Auto Job Start Turning On the Power Switch 2 The “Ready” message appears. This message indicates that the copier is ready for operation. Auto Job Start READY 1 PAPER :APS :AUTO FINISHING :NONSORT ZOOM :100% EDIT While the copier is warming up, place the original on the glass, select the desired copy modes and press the key. Wait warming up:Auto Start When the machine reaches its proper operating temperature, copying will automatically star t. Tip Even after you have pressed the key, you can change the copy modes if copying has not yet started. To cancel the auto job start mode, press the key. 1 Open the power switch cover and turn ON the switch. This message appears on the message display panel of the basic screen : Please wait Wait warming up Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES 7 Repeat steps 4 to 6 to specify the paper size for other paper cassettes, as necessary. 8 Press the key to return to the initial screen for copying. 3. PAPER (Cont.) Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 1. GENERAL COPYING PROCEDURE When originals are set and the key is pressed with all settings unchanged, copies are made using the initial (default) settings (*1). By selecting various copy modes, you can alter the number and type of copies to be made. 1 Place originals. When placing an original on the glass: Page 2-5 When placing originals facing up in the automatic document feeder (optional) or the reversing automatic document feeder (optional): Page 2-6 The initial (default) settings of the copier at the time of installation are as shown on the right. You can change these initial settings. Page 5-18 *1 The copy modes that are automatically set when the power is turned on or when the key is pressed on the control panel are called the initial (default) settings. Copying Procedure Reproduction ratio ........... 100% Copy quantity ................... 1 Automatic paper selection 1-side copies from 1-side originals Automatic image density Text/photo mode Non-sort mode Initial settings Original scale Original Slide Automatic document feeder Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 2. SETTING ORIGINALS Originals The following specifications apply to originals that can be used with this copier: Remarks Do not place any heavy object (4 kg or over) on the glass. Some of the originals on the left may not be used depending on type or thickness. (For details, consult your service technician.) Some of the originals on the left may not be used depending on paper quality. Maximum number that can be set 50 originals (50 to 80 g/m 2) or stacked height of originals 8 mm or less 100 originals (50 to 80 g/m 2) or stacked height of originals 16 mm or less Size capable of automatic detection Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 (for e-STUDIO20/ 25 only) Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 Regular size A/B format: A3, A4, A4-R, A5-R, FOLIO, B4 Types of original Sheets Three-dimensional objects Books Plain paper, thermal paper (for word processor or fax), long originals, originals with filing holes (2-, 3- and 4- holes): 50 to 105 g/m 2 (Multi-sheet feeding) 50 to 127 g/m 2 (1-sheet feeding) Plain paper, thermal paper (for word processor or fax), long originals, originals with filing holes (2-, 3- and 4- holes): 50 to 127 g/m 2 (1-sided original) 50 to 105 g/m 2 (2-sided original) Setting place Glass Automatic document feeder (optional) Reversing automatic document feeder (optional) Maximumsize Width : 302 mm Length : 432 mm Width : 297 mm Length : 432 mm Width : 297 mm Length : 432 mm Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES Using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (option) 2. SETTING ORIGINALS (Cont.) 1 After aligning the edges of the originals well, place them on the original feed tray facing up and align the slides to the width of the originals. Slide Downloaded From ManualsPrinter.com Manuals HOW TO MAKE COPIES 3. INTERRUPT COPYING The interrupt copy is a convenient feature that allows the user to pause a job that is currently in progress. 1 Press the key. This message appears: Job interrupted The key illuminates during the INTERRUPT copying. Note One interrupt copy can be made from multiple originals by placing them on the glass one at a time. 2 Place the original. If the previous original remains on the glass, open the original cover or automatic document feeder (optional) or the reversing automatic document feeder (optional) and replace it with the original to be interrupt-copied. 3 Press the key. Repeat steps 2 to 4 if you need to interrupt copying again. 4 After interrupt copying is finished, press the key again. When the following is shown on the Message Display, press the key and perform the interrupted jobs. Ready to resume job. Ready to resume job 3 PAPER :APS :AUTO FINISHING :SORT ZOOM :100% EDIT Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION Automatic Paper Selection (APS) When the power switch is turned ON, the Automatic Paper Selection (APS) mode is selected as the default mode. In this mode, when a regular-sized original is loaded for copying, the copier detects the original size automatically and selects a same paper size as the original size. For the e-STUDIO16, when the original is placed on the glass for copying, the copier cannot detect its size automatically. A message appears prompting the user to specify the size of the original. * This mode can only be used for actual-size (100%) copying. * For automatically selectable original sizes: Page 2-4 1 Check that APS mode is selected in the upper left portion of the Message Display. 4 Enter the desired copy quantity using numeric keys. A copy quantity up to 999 can be keyed in. The copy quantity default is set at one. When an incorrect quantity is set, press the key and key in the correct number. If you press the key, all current copier settings will be cleared, and returned to the default settings. 3 Select desired copy mode. 2 Place the original(s) on the original feed tray or on the glass. READY 1 PAPER :APS :AUTO FINISHING :SORT ZOOM :100% EDIT 5 Press the key. If the following messages are shown; Change the direction of original(s). Change direction of original. Load the cassette containing paper in the same size as the original. Set correct cassette Add paper in the cassette. Add Paper Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION (Cont.) Manual Paper Selection Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with dark borders, or non-regular sized originals such as newspaper and magazines, may be incapable of automatic paper selection. For these types of originals, use the manual paper selection. 1 Press the key with the initial screen shown in the COPY mode. 2 Use the or keys and select the paper cassette that you would like to feed paper from. Please note that the cassettes must be pre-defined with the size of paper loaded. Page 1-8 3 Place the original(s) on the original feed tray or on the glass. (“Setting Original”. Page 2-4) 4 Select desired copy mode and quantity as required. 5 Press the key. READY 1 PAPER APS SUPPLY: :A4 :B4 Downloaded From ManualsPrinter.com Manuals BASIC MENU 1. PAPER SELECTION (Cont.) 5 Enter the desired copy quantity using the numeric keys. 6 Press the key. Tip If the paper misfeeds in the bypass and the Paper Jam Lamp flashes, remove the sheets from the bypass and replace them. Page 7-14. If the size of paper to be loaded is not identical to one specified in the default setting, the default settings must be reset. Page 1-11. Downloaded From ManualsPrinter.com Manuals BASIC MENU 2. REDUCTION AND ENLARGEMENT COPYING There are four methods available for enlargement and reduction copying. Using Automatic Magnification Selection (AMS): After selecting the AMS mode and copy size, the copier automatically detects the size of the original and calculates the appropriate reproduction ratio. For the e-STUDIO16, when the original is scanned on the glass, the user must to manually specify the size of the original. REDUCE/ENLARGE: When a regular-sized original and copy paper are used, select a ratio corresponding to the paper size. Selectable Ratio: Using Automatic Magnification Selection (AMS) 1 Press the key. ZOOM UP/DOWN: The Down and Up arrow keys select the desired reproduction ratio at 1% increments. XY ZOOM: This function allows you to alter the reproduction ratio in the X and Y directions of your copies. * Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with dark borders, or non-regular sized originals such as newspaper and magazines, may be incapable of automatic magnification selection. For these types of originals, use the reduction/enlargement modes. Ratio 50% 71% 82% 141% 200% Original/Copy A3/A5-R A3/A4-R, A4-R/A5-R, B4/B5-R B4/A4-R, B5-R/A5-R A4-R/A3, A5-R/A4-R, A5/A4, B5-R/B4 A5-R/A3 Downloaded From ManualsPrinter.com Manuals BASIC MENU 2. REDUCTION AND ENLARGEMENT COPYING (Cont.) Reduce/Enlarge 5 Place the original to be copied in the feeder or on the glass, key in the copy quantity, and press the key. 1 Select the appropriate paper cassette. (Manual Paper Selection Page 3-3.) 2 Press the key or key. Press the key and go to step 3, or press the key and go to step 4. 3 Use the or keys and select “REDUCE/ ENLARGE.” Press the key. 4 Select the desired reproduction ratio using the or key. Press the key. You must to manually specify the size of the original. READY 1 PAPER : A4 :AUTO FINISHING :SORT ZOOM :65% EDIT When a regular-sized original and copy paper are used, select a ratio corresponding to them. READY 1 ZOOM: 100% AMS REDUCE/ENLARGE ZOOM 1 REDUCE 50% A3 > A5 /ENLARGE: 71% A3 > A4 82% B4 > A4 141% A4 > A3 200% A5 > A3 Downloaded From ManualsPrinter.com Manuals BASIC MENU X-Y Zoom This function allows you to alter the reproduction ratio in the X and Y directions of your copies. 1 Press the key on the control panel. 2 Press the key to display “XY ZOOM.” Then press the key. 3 Specify the X and Y reproduction ratios. Select the X or Y direction using the or key and specify the reproduction ratio using the or key. Then press the key to accept the reproduction ratio. When the original is scanned on the original glass, the reproduction ratio can be specified to 50 % to 200 % for the e-STUDIO16, and 25 % to 400 % for the e-STUDIO20/25. When the original is scanned in the automatic document feeder (optional) or reversing automatic document feeder (optional), the reproduction ratio of 50 % to 200 % can be specified. 4 “Xxxx-Yxxx%” appears next to zoom on the display. 5 Select the desired paper cassette, image density and copy quantity. 6 Place the original on the glass or the feed tray and press the key. READY 1 ZOOM: REDUCE/ENLARGE ZOOM UP/DOWN XY ZOOM ZOOM 1 XY ZOOM: 200% X 100 % - Y 99 % 50% READY 1 PAPER : A4 :AUTO FINISHING :SORT ZOOM :X100-Y99% EDIT 100%200% 100% 200% 2. REDUCTION AND ENLARGEMENT COPYING (Cont.) Downloaded From ManualsPrinter.com Manuals BASIC MENU 3 Press the or key to select the desired image density. To produce lighter copies, press the key. Each time you press the key, the density-indicating mark moves one step to the left and your copies are produced proportionally lighter. To produce darker copies, press the key. Each time you press the key, the density-indicating mark moves one step to the right and your copies are produced proportionally darker. 4 When the key is pressed after density is set, the screen returns to the initial screen for copying. The specified copying density appears on the message display. 5 Place the original to be copied in the feeder or glass and press the key. Copies are made in the selected image density. LIGHT/DARK 1 MANUAL: -3-2-10+1+2+3 READY 1 PAPER : A4 : 2 FINISHING :SORT ZOOM :100% EDIT 3. COPYING WITH COPY DENSITY SELECTION (Cont.) Downloaded From ManualsPrinter.com Manuals BASIC MENU Downloaded From ManualsPrinter.com Manuals EDIT MENU 1. DUPLEX COPYING This function allows you to set the type of originals (1-sided, 2-sided or book-type) and the desired type of copying (1-sided or 2-sided). Original Copy *, , and require the optional automatic duplexing unit to be installed. * and require the optional reversing automatic document feeder to be installed. Downloaded From ManualsPrinter.com Manuals EDIT MENU 1-Sided Originals > 2-Sided Copies There are two methods of making duplexed copies from single-sided originals: Using the automatic document feeder (optional) or reversing automatic document feeder (optional) - For duplex-copying from sheet originals of the specified sizes and weights. Setting originals on the glass - For duplex-copying from originals that cannot be handled by the automatic document feeder (optional) or the reversing automatic document feeder (optional). Note This copying mode requires the automatic duplexing unit (optional) to be installed. 1. DUPLEX COPYING (Cont.) When using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (optional) 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “1 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 5 Place the originals on the feed tray. 6 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF DUPLEX 1 Original > Copy 1 > 1 1 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU When Placing the Original on the Glass 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “1 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 5 Place the first page of the originals (first side) on the glass. 6 Press the key. For the e-STUDIO16, when the automatic paper selection (APS) mode or automatic magnification selection (AMS) is selected, a message appears prompting you to specify the size of the original that you would like to copy. Use the or key to specify the size of the original. Then press the key. The copier will start scanning the original. 7 Place the next original (second side) on the glass. 8 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF 1. DUPLEX COPYING (Cont.) Next original? 1 YES NO DUPLEX 1 Original > Copy 1 > 1 1 > 2 Select original size 1 A4 A3 A4-R A5-R B4 Downloaded From ManualsPrinter.com Manuals EDIT MENU 2-Sided Originals > 2-Sided Copies Placing two sided originals on the reversing automatic document feeder (optional) and pressing the key feeds the original and scans the first side of the original into memory. The original and the sheet are then turned over automatically and the second side of the original is scanned into memory. Once both sides of all originals are scanned, the desired copies are printed. You can set up to 100 A4 size (64 to 80 g/m 2) originals at a time. Note This copying mode requires the reversing automatic document feeder (optional) and the automatic duplexing unit (optional) to be installed. 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “2 > 2” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, reproduction ratio, image density and copy quantity. The automatic paper selection mode is selected as the default mode. 5 Place the originals on the feed tray. 6 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF 1. DUPLEX COPYING (Cont.) DUPLEX 1 Original > Copy 1 > 2 2 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU This copying mode requires the automatic duplexing unit (optional) to be installed. 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “BOOK > 2” by pressing the key. 4 Press the key. 7 Specify the Book Margin then press the key, as necessary. Press the or key to specify the Book Margin. Each time either of the keys is pressed, a value is incremented or decremented by 1mm. Press the key to increment, or key to decrement the value. Specify the value within a range of 8 mm to 30 mm. 6 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF Book-Type Originals > 2-Sided Copies 5 Select the start and end page. Select the desired copy mode using the or key. RIGHT > RIGHT Copying is star ted from a right page of the book and it ends on a right page. RIGHT > LEFT Copying is star ted from a right page of the book and it ends on a left page. LEFT > LEFT Copying is started from a left page of the book and it ends on a left page. LEFT > RIGHT Copying is started from a left page of the book and it ends on a right page. 1. DUPLEX COPYING (Cont.) DUPLEX 1 Original > Copy 2 > 1 BOOK > 2 BOOK > 2 1 RIGHT > RIGHT RIGHT > LEFT LEFT > LEFT 8 Press the key. BOOK MARGIN 1 30mm 15mm 8mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 8 Press the key. 2. DUAL PAGE COPYING The facing pages of a book or magazine are copied one at a time onto two separate sheets of paper. You need not move the original on the glass. Two A4 size originals placed side by side on the glass can also be copied onto two separate sheets of paper. Example of Dual Page Copying 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display the “DUAL PAGE” in reverse. Then press the key. 3 Press the key and select “ON.” Then press the key Upon selecting “ON”, you are given an opportunity to select the appropriate book margin. Any value ranging from 8 mm to 30 mm is acceptable. When 20 mm is entered, a line that appears at the center of the copy is masked in a range of 20 mm. When a copy is made, a 10 mm margin is established on both sides of the line. When both the Edge Erase width and the Book Margin are specified, a bigger value would be specified for the margin. 4 “DUAL PAGE: XXmm” appears. Press the key to return to the initial screen for copying. 5 Select the A4 paper cassette. 6 Place the original on the glass. 7 Select the desired image density, etc. as required. Only 100 % of reproduction ratio is acceptable. READY 1 DUPLEX :1>1 DUAL PAGE :OFF IMAGE SHIFT :OFF READY 1 DUPLEX :1>1 DUAL PAGE :8mm IMAGE SHIFT :OFF DUAL PAGE 1 OFF ON BOOK MARGIN 1 30mm 8 mm 8mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 7 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 8 Press the key. 4. EDGE ERASE COPYING If the edges of an original are torn or dirty, they are reproduced as black stains on the copy. Using the edge erase mode, a white border will be created along the outside edges of the copy eliminating the marks. The default edge erase margin is 10 mm, but you can select any margin within the range of 4 to 20 mm. Example of Edge Erase Copying 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “Edge Erase.” Then press the key. 3 Press the key and select the “ON.” Then press the key. 4 The current edge erase margin appears on the screen. To change the edge erase margin, select the desired margin by using the or key. Then press the key. The edge erase margin changes at increments of 1 mm. 5 The selected edge erase margin appears on the screen. Press the key to return to the initial screen for copying. 6 Place the original(s) on the feed tray or on the glass. READY 1 DUAL PAGE :OFF IMAGE SHIFT :OFF EDGE ERASE :OFF READY 1 DUAL PAGE :OFF IMAGE SHIFT :OFF EDGE ERASE :10mm EDGE ERASE 1 OFF ON EDGE ERASE 1 20mm 10mm 4mm Downloaded From ManualsPrinter.com Manuals EDIT MENU 5. 2-IN-1/4-IN-1 (Cont.) 5 Select the type of original and copy. 6 Press the key. 7 What is selected appears on the screen. Press the key to return to the initial screen for copying. 8 Select the desired paper cassette, image density, and copy quantity. 9 Press the key. 2IN1 1 Original > Copy 2 > 2 2 > 1 READY 1 IMAGE SHIFT :OFF EDGE ERASE :OFF 2IN1/4IN1 :2IN1(2>1) Note To select the paper cassette, press the key, select AMS and then select the desired paper cassette. Downloaded From ManualsPrinter.com Manuals EDIT MENU The magazine sort mode allows you to copy and sort originals so that the copies can be folded in half along the inside as if you were making a magazine. Note This copying mode requires the optional automatic duplexing unit (optional) to be installed. Example of magazine sort 6. MAGAZINE SORT 27 188765432145 36 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 3 Press the key to display “ON.” Then press the key. 4 Press the key and specify whether the originals are single-side or duplex. Then press the key. 5 “MAGAZINE SORT: X>2” appears. Press the key to return to the initial screen for copying. 6 Select the desired image density and copy quantity. READY 1 EDGE ERASE :OFF 2IN1/4IN1 :OFF MAGAZINE SORT:OFF READY 1 EDGE ERASE :OFF 2IN1/4IN1 :OFF MAGAZINE SORT:1>2 2 Press the key to display “MAGAZINE SORT.” Then press the key. MAGAZINE SORT 1 OFF ON MAGAZINE SORT 1 Original > Copy 1 > 2 2 > 2 Downloaded From ManualsPrinter.com Manuals EDIT MENU 9 For the subsequent originals, repeat step 8 above. 10 When scanning of the last original has finished, select “NO.”Next Original? 3 YES NO 11 Press the key. 6. MAGAZINE SORT (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU Tip In the annotation function, printing is performed along the lead- edge of the paper selected. This may be the top or the side of copy depending upon the orientation of the copy paper. Therefore, place the original with its top facing the paper output side of the machine. 6 Place the original on the glass and press the key.When Placing the Original on the Glass 7 Select “YES,” set the next original and press the key. Next Original? 3 YES NO Next Original? 3 YES NO Memory clear? 3 YES NOWhile the “Next Original?” screen is being shown, if the key is pressed, the scanned data is deleted, and the ANNOTAION is terminated. Select “YES” or “NO,” and press the key. 8 For the next and subsequent originals, repeat step 7 above. 9 When the last original is finished being scanned, select “NO.” 10 Press the key. 7. ANNOTATION (Cont.) For the e-STUDIO16, when the automatic paper selection (APS) mode or automatic magnification selection (AMS) is selected, a message appears prompting you to specify the size of the original that you would like to copy. Use the or key to specify the size of the original. Then press the key. The copier will start scanning the document. When the first original has been scanned, the “Next Original?” screen appears. Select original size 1 A4 A3 A4-R A5-R B4 Downloaded From ManualsPrinter.com Manuals EDIT MENU Negative/Positive Reversal This function allows you to reverse the black areas on the original as white areas, or vice versa. * This function is not available with Edge Erase, Sort, Alternation, Duplex copying, Srot/Offset, Dual Page, 2-in-1/4-in-1, Magazine Sort and Book > 2. Example of negative/positive reversal 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “EDITING.” Then press the key. 3 Press the key and select “NEG/POS.” Then press the key. 4 “EDITING: NEG/POS” appears. Press the key to return to the initial screen for copying. 5 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 6 Place the original on the glass or the feeder tray and press the key. READY 1 MAGAZINE SORT:OFF ANNOTATION :OFF EDITING :OFF READY 1 MAGAZINE SORT:OFF ANNOTATION :OFF EDITING :NEG/POS EDITING 1 OFF MIRROR NEG/POS 8. EDITING (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU 1 Press the key on the control panel while in the initial screen for copying. 2 Press the key to display the “MIX SIZE”. Then press the key. 3 Press the key to display the “ON”. Then press the key. 4 Select the Automatic paper Selection (APS) mode or Automatic Magnification Selection (AMS) mode. Then select the desired paper cassette, reproduction ratio, image density and copy quantity as required. 5 Place the originals on the original feed tray. 6 Press the key. 10. COPYING MIXED SIZE ORIGINALS Put original in doc. feeder 1 EDITING :OFF BUILD JOB :OFF MIX SIZE :ON A set of originals with different paper sizes can be copied together in the same operation, as long as the originals all have the same width. Note This copy function requires the optional reversing automatic document feeder (RADF) be installed. READY 1 EDITING :OFF BUILD JOB :OFF MIX SIZE :OFF MIXED SIZE ORIGINAL 1 OFF ON Note When the “MIX SIZE” is selected, the “APS” is automatically selected. Downloaded From ManualsPrinter.com Manuals EDIT MENU Recalling a Stored Combination of Copy Modes 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Press the key to display “JOB MEMORY” in reverse. Then press the key. 3 Press the key while “RECALL” is selected. 4 Select the desired Job number from “MEMORY1” to “MEMORY4”. Then press the key. Press the key to return to the initial screen for copying. Tip When the selected memory location contains a pre- programmed job, the Job Memory icon is highlighted with a box. 5 Place the original on the glass or the feed tray and press the key. The original is copied in the combination of modes you have recalled. READY 1 EDITING :OFF JOB BUILD :OFF JOB MEMORY JOB MEMORY 1 RECALL MEMORY MEMORY 1 MEMORY1 MEMORY2 MEMORY3 MEMORY4 11. JOB MEMORY (Cont.) Downloaded From ManualsPrinter.com Manuals EDIT MENU 13. MENU LIST 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. Print out the copier’s menu list. READY 1 JOB MEMORY PAPER TYPE :OFF MENU LIST MENU LIST Printing acceptedThe menu list will be printed out. 2 Press the key to display “MENU LIST.” Then press the key. Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION 1. FINISHING MODE SELECTION Offset Tray (option) When the Offset Tray is configured, the copied set are collated or stacked in groups with each set offset. Job Separator (option) The job separator function allows a copied job and an optional fax job to be output onto separate paper trays. Stapler (option) Sets of copies can be manually stapled when the stapler with work surface is attached. Finisher (option for e-STUDIO20/25 only) When the Finisher is attached, the OFFSET, SORT/OFFSET, and STAPLE functions become available. Tr a y s Paper stopper Note When longer paper, such as Ledger size, is designated to output onto the lower tray, please use the paper stopper attached to the Job Separator. (Do not use the paper stopper attached to the lower tray.) Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION As sets of copies are output, the sets are sorted. Example: Making 5 sets of copies from 5-paper originals *Bypass copying is not possible in the sor t mode. 3. SORT COPYING 1 Place the originals in the feeder. Confirm that “SORT” is shown for “FINISHING.” 2 If “FINISHING:SORT” is not displayed, press the key and select the sort mode. Select “SORT” from the FINISHING menu by pressing the key. Then press the key. 3 Key in the desired copy quantity (sets) using the numeric keys. 4 Select the desired paper cassette, image density and reproduction ratio. 5 Press the key. The copier starts scanning the original. Press the key to stop scanning the original temporarily. Press the key to resume scanning. 54321 54321 54321 54321 54321 54321 Press START to resume 3 PAPER : A4-R :AUTO FINISHING :SORT ZOOM :100% If the key is pressed again when scanning has stopped, the scanned data is deleted and the sort copying is terminated. Select “YES” or “NO,” and press the key. When all originals are scanned, the copier automatically starts copying. Copies are outputted in sets. Memory clear? 3 YES NO Tip NON SORT/OFFSET and SORT/OFFSET can be selected only when the Offset Tray or Finisher is installed. READY 1 FINISHING: NONSORT NONSORT/OFFSET SORT When Using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (optional) Downloaded From ManualsPrinter.com Manuals FINISHING MODE SELECTION 4. OFFSET COPYING When the Offset Tray or Finisher is attached, the sets of copies that are collated or stacked in groups are output in one pile but each set is offset, as illustrated. Example:Making 6 sets of copies from 3-page originals. (Bypass copying is not possible in the offset mode.) 1 Place the originals in the feeder or on the glass. Select the desired number of copies, image density and reproduction ratio. 3 Select the OFFSET mode. Select “NONSORT/OFFSET” or “SORT/OFFSET” from the FINISHING menu by pressing the key. Then press the key. 321 111 2 Press the ke“FINISHING” screen appear When the offset tray is full, the following message appears: Remove paper from offset. Remove the copies from the tray and press the key to continue. Refer to the procedures described in “NON-SORT COPYING” when “NONSORT/OFFSET” is selected. Page 6-3 Refer to the procedures described in “SORT COPYING” when “SORT/OFFSET” is selected. Page 6-4 READY 1 FINISHING: NONSORT/OFFSET SORT SORT/OFFSET Downloaded From ManualsPrinter.com Manuals 6-8FINISHING MODE SELECTION When Placing the Original on the Glass 2 Select the “AL” mode Select “ALTERNATION” from the FINISHING menu by pressing the key. Then press the key. 3 K ke 4 Select the desired ima ratio. 5 Place the original and press the ke When scanning of the first original has finished, the “NEXT ORIGINAL?” screen appears. 6 Select “YES,” set the ne ke 7 For the ne 6. 8 When the last original has been finished being scanned,“NO” 1 Press the ke“FINISHING” screen appear Copying 3 PAPER : A4 :AUTO FINISHING :ALTERNATION ZOOM :100% The copier starts scanning the original. Press the key to stop scanning the original temporarily. Press the key to resume scanning. Press START to resume 3 PAPER : A4 :AUTO FINISHING :ALTERNATION ZOOM :100% If the key is pressed again when scanning has stopped, the scanned data is deleted, and the alternation is terminated. Select “YES” or “NO” and press the key. When all originals are scanned, the copier automatically starts copying and collates the copies into sets. Memory clear? 3 YES NO Next Original? 3 YES NO 5. READY 1 FINISHING: SORT SORT/OFFSET ALTERNATION Downloaded From ManualsPrinter.com Manuals 6-10FINISHING MODE SELECTION 6. When the optional finisher is installed, you can use the function that automatically staples Maximum capacity for stapling. A4, A4-R, B5 (LT, LT-R)30 sheets B4 20 sheets A3, FOLIO 15 sheets When the optional finisher is installed \(option f ABABAB FinishSet on the Automatic Document FeederPlaced on the glass 1 Place the originals in the f 3 Select the “ST” mode Select “STAPLE” from the FINISHING menu by pressing the key. Then press the key. 4 K ke 5 Select the desired ima ratio. 6 Press the ke The copier starts copying. In this copying mode, Stapled each set of copies are ejected. 2 Press the ke“FINISHING” screen appear When Using the A the Rever READY 1 FINISHING:SORT SORT/OFFSET STAPLE Downloaded From ManualsPrinter.com Manuals 6-12FINISHING MODE SELECTION To position the staple in parallel with the copy’s top edge, align them to the guide in the diagonal direction. When sets of copies are inserted aligned to the guide, they will be stapled automatically. The stapling direction varies depending on the orientation of the sets. This function is only available when the optional Stapler kit (KK-1600) is installed. To staple sets of copies diagonally, align them to the guide in the front. 6. When the optional Stapler kit is installed Downloaded From ManualsPrinter.com Manuals 7-2WHEN THE GRAPHIC SYMBOL FLASHES 1. DESCRIPTION OF THE GRAPHIC SYMBOLS The message display panel shows the status of the copier. When one of the graphic symbols flashes, go to the pages referenced and take the recommended action. Page 7-12 to 23 Page 7-3 Page 7-5 Downloaded From ManualsPrinter.com Manuals 7-4WHEN THE GRAPHIC SYMBOL FLASHES B A 1 Pulling up the grip, draw out the large-capacity feeder carefully until it comes to a stop. 2 Open some paper packages, take out entire reams of paper and set them aligned in tray and tray . When setting the paper, set the paper for to the right aside, and set it for to the left aside. (The paper can be set neatly if you pile up the paper little by little alternately in the tray and .) Be sure that the centre lever is not open (Refer to the labels attached in the large-capacity feeder). Do not add paper above the line indicated on the guide. Up to 2500 sheets of paper (recommended by Toshiba) can be set. Paper star ts being fed from the elevator tray at first, and when it runs out of paper, the paper on tray moves to the position . Do not use creased, folded, wrinkled or damp sheets of pa- per. 2. LOADING PAPER (Cont.) Adding Paper to the Large-Capacity Feeder (option for e-STUDIO20/25) 3 Close the cover of the large-capacity feeder. Close the cover completely. The elevator tray automatically moves up to the paper feeding position. Downloaded From ManualsPrinter.com Manuals 7-6WHEN THE GRAPHIC SYMBOL FLASHES 4 It is possible that the toner may have become caked in the replacement Toner Cartridge. In order to insure the toner flows smoothly, shake the new Toner Cartridge back and forth several times. 5 Pull the tab or remove the sealing tape from the new cartridge. 6 Install the new Toner Cartridge sliding it into the copier. 7 After installing the Toner Cartridge, move the charger wire cleaning lever (in and out) of the Process Unit several times to clean the charger wire. 3. REPLACING TONER CARTRIDGE (Cont.) Downloaded From ManualsPrinter.com Manuals 7-8WHEN THE GRAPHIC SYMBOL FLASHES Replacing Process Unit 1 Open the stack feed bypass. 2 Open the automatic duplexing unit by pulling up on the release grip. (Not all copiers are equipped with automatic duplexing units.) 3 Open the side cover of the copier. 4. REPLACING PROCESS UNIT Note Do not expose the green drum to light for an extended period. Never expose the drum to direct sunlight or touch the drum surface. Damage or poor print quality may result. The Process Unit requires replacement when the “Drum life warning” is displayed. Tip When “Drum life warning” is displayed, the copier can continue to make copies (1,000 copies). After copying 1,000 sheets, the message changes to “Replace process unit” and the copier stops. Downloaded From ManualsPrinter.com Manuals 7-10WHEN THE GRAPHIC SYMBOL FLASHES 4. REPLACING PROCESS UNIT (Cont.) 11 Pull the tab to remove the sealing tape from the Process Unit. Important Never touch the photoconductive drum (the green surface) of the Process Unit. If the surface is scarred or scratches, it will cause print quality problems. Do not expose the photoconductive drum of the process Unit to light for more than 3 minutes. If the Process Unit is to be left anywhere outside the copier, be certain to cover it with cloth, paper, etc. 12 Insert the new Process Unit all the way into the copier. Then install the Toner Cartridge by reversing the removal procedure. Always hold the Process Unit by the colored handle. Do not touch the green drum area. Do not leave the Process Unit out of the copier for an extended period of time. 13 After installing the Toner Cartridge, move the charger wire cleaning lever (in and out) of the Process Unit several times to clean the charger wire. 9 Discard the used Process Unit properly. 10 Open the package and take the new Process Unit out. 8 Grasping the colored handle on top of the Process Unit, remove the Process Unit from the copier. 14 Close the covers opened during this procedure and latch the deplexing unit into position (if attached). Downloaded From ManualsPrinter.com Manuals 7-12WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM Remove any misfed originals. Use the following procedures to remove an original jammed in the Reversing Automatic Document Feeder (optional). An original jammed in the Automatic Document Feeder (optional) can be removed in the same manner. 1 Press the button to unlock and open the cover. Paper Misfeeds in the Reversing Automatic Document Feeder (optional) When a paper misfeed occurs in the copier, the Paper Jam Lamp flashes and the message below appears: An illustration and short description indicates the procedures to remove jammed paper. Press the or key to scroll through the individual pages of the procedures. Misfeed in xxxx xxxx represents the position where the transfer error occurred. To clear the error for each position, refer to the following pages. Misfeed in copier Open side cover of the copier. 1/ 4 Downloaded From ManualsPrinter.com Manuals 7-14WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM (Cont.) 5 Lift the original tray. When holding the cover to lift up the original tray, please be careful not to get your fingers caught. 8 Lift the reversing automatic document feeder to expose the under side. Then press the blue lever to release the access panel. 6 Remove any misfed originals. 7 Lower the original tray and close the reversing automatic document feeder cover. Downloaded From ManualsPrinter.com Manuals 7-16WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM (Cont.) 1 Open the side cover. 2 Remove any misfed paper. Then close the cover. Paper Misfeeds in Paper Feed Pedestal (optional) B Paper Misfeed in the Large-Capacity Feeder (option for e-STUDIO20/25) 2 Remove any misfed paper. 1 Open the cover . Downloaded From ManualsPrinter.com Manuals 7-18WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM (Cont.) 1 Making sure that the stack feed bypass and the automatic duplexing unit are opened, open the side cover.Paper Misfeeds in the Drum/Charger area 2 Press the two blue levers. To release any paper in the fuser unit. Caution As the Fuser Section is heated, pay special attention when handling it. If hot, allow the fuser to cool prior to touching. 3 Rotate the knob indicated with a blue arrow toward the inside and remove any misfed paper. 4 After clearing all paper, return the two blue levers. Close the exit cover and the right side cover. Return the duplex unit to its normal position (if installed). Downloaded From ManualsPrinter.com Manuals 7-20WHEN THE GRAPHIC SYMBOL FLASHES 4 Press the two blue levers. To release anypaper in the fuser unit. 5. CLEARING PAPER JAM (Cont.) 5 After clearing paper, return the two blue levers. Close the fuser cover and tighten the two blue screws. Close the exit cover and the right cover. Return the automatic duplexing unit to normal position (if installed). Downloaded From ManualsPrinter.com Manuals 7-22WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM (Cont.) 2 Remove any misfed paper inside the relay unit. Paper Misfeed in the Relay Unit (option for e-STUDIO20/25) If paper is misfed at the inner part of the relay unit, remove it pushing down the blue lever. Remove the misfed paper from the fuser unit side if it is easier. 1 Holding the cover handle of the relay unit, open it. Downloaded From ManualsPrinter.com Manuals 7-24WHEN THE GRAPHIC SYMBOL FLASHES 6. ADDING STAPLES Finisher (option for e-STUDIO20/25) 1 By pulling the lever, move the finisher away care- fully from the copier. 4 Remove the empty staple case upward from the staple cartridge. 5 Push in a new staple case into the staple cartridge completely inside until a click is heard. Do not remove the seal holding the staples before the staple case is set in the cartridge. 2 Holding the sides of the staple cartridge, slide it out. 3 Turn the staple cartridge upside down. Downloaded From ManualsPrinter.com Manuals 7-26WHEN THE GRAPHIC SYMBOL FLASHES 6. ADDING STAPLES (Cont.) Be sure to turn off the copier before replacing the staples. 1 Slide forward and lift up the staple cover. 2 Pull out the staple cartridge. 3 Press the cartridge knob to remove the empty staple case. 4 Insert a new staple case into the cartridge. Do not peel off the sticker from the staple case before inserting the staple case into the car tridge. Staple kit (option) Downloaded From ManualsPrinter.com Manuals 7-28WHEN THE GRAPHIC SYMBOL FLASHES 7. REMOVING JAMMED STAPLES Finisher (option for e-STUDIO20/25) 1 Perform steps 1 and 2 of the procedure for “6. ADDING STAPLES Finisher ” ( Page 7-22). 3 Remove any jammed staples using your fingertip or something sharp. 4 Holding the knob, return part to its original position. A A 2 Holding the knob, lower part . 5 Return the staple cartridge to its original position. Insert the cartridge until it is caught by the claw and fixed with a click sound. 6 Attach the finisher to the copier. Downloaded From ManualsPrinter.com Manuals 7-30WHEN THE GRAPHIC SYMBOL FLASHES 5 Close the staple cover. 6 Restore power to the copier. Confirm proper operation of the stapler. 7. REMOVING JAMMED STAPLES (Cont.) Downloaded From ManualsPrinter.com Manuals 7-32WHEN THE GRAPHIC SYMBOL FLASHES 9. PERIODIC MAINTENANCE Note When the either of the following messages appears on the message display: Time for maintenance Maintenance/Drum This indicates that assistance from a qualified service technician is required. Call for service.or Downloaded From ManualsPrinter.com Manuals 9-2MAINTENANCE 1. DAILY INSPECTION Items to inspect every morning Power switch ON/OFF status We recommend turning the power switch ON at startup every morning so that copies can be made whenever you want. Also, make sure that you turn the power switch OFF when you leave the office. Items to inspect once a week Cleaning the Original Cover Clean the original cover or the back of the automatic document feeder (optional) or reversing automatic document feeder (optional) with alcohol or a well-squeezed soft cloth moistened with a neutral detergent. Then dry with a soft cloth. Cleaning the Automatic Document Feeder (optional) or Reversing Automatic Document Feeder (optional) Clean the automatic document feeder (optional) roller or reversing automatic document feeder (optional) roller with alcohol or a soft cloth moistened with a neutral detergent. Make sure that the soft cloth is squeezed well. Then dry with a soft cloth. Note Before cleaning the copier, be sure to turn OFF power switch. Please be careful not to scratch the glass surface or back of the cover, when cleaning it. Cleaning the Original Glass Clean the original glass scanning glass of the auto document feeder and scale with a soft cloth moistened with cleaning liquid. Then dry with a soft cloth. Downloaded From ManualsPrinter.com Manuals 9-4MAINTENANCE Cleaning the transfer charger wire 1 Making sure that the stack feed bypass and the automatic duplexing unit (if installed) are opened, open the side cover. 2 Clean the transfer charger wire using the attached charger cleaning accessory. 3 Close the side cover, automatic duplexing unit and stack feed bypass. 2. CLEANING THE WIRE (Cont.) When any of the following is generated on the copy, clean the transfer charger wire. White lines in the direction of paper feed. Uneven tone or dim images. BE SURE TO TURN OFF THE POWER before cleaning the transfer charger wire. Downloaded From ManualsPrinter.com Manuals 9-6MAINTENANCE 3. SIMPLE TROUBLE SHOOTING (Cont.) Copies are stained Countermeasure Close the cover firmly to shut out any external light. Clean the original glass with a cloth moistened with cleaning liquid. Then wipe it with a dry cloth. Clean the original cover with a cloth moistened with a neutral detergent. Then wipe the detergent completely off with a dry cloth. Set the image density properly. Reference page _ 9-2 9-2 3-12 Items to be checked Is the original cover firmly closed? Is the original glass dirty? Is the original cover dirty? Is the image density set properly? Countermeasure Replace the toner cartridge. Set the image density properly. Reference page 7-4 3-12 Items to be checked Has the message “Toner empty” appeared on the screen? Is the image density set properly? Countermeasure Set the image density properly.Reference page 3-12Items to be checked Is the image density set properly? Copy density is too low Copy density is too high Downloaded From ManualsPrinter.com Manuals 9-8MAINTENANCE Downloaded From ManualsPrinter.com Manuals 10-2SPECIFICATIONS & OPTIONS 1. e-STUDIO16/20/25 SPECIFICATIONS Model Name Body Type Copying System Original Glass Original Cover (Platen Cover) Frame Structure Photosensor Type Original Scanning System Resolution Scanning Data Output System Image Memory Maximum Original Capacity (with max. image memory installed) * Acceptable Originals Acceptable Copy Paper Size Warm-up Time First Copy Time Multiple Copying Reproduction Ratio Paper Supply Copy Density Adjustment Power Requirement/ Power Consumption Dimensions (Main Body only) Weight (Main Body only) DP1600/2000/2500 Desktop type Indirect electrophotographic method Fixed (original referenced to top left, referenced to center when using the Automatic Document Feeder or the Reversing Automatic Document Feeder) Option Fixed frame method OPC drum CCD sensor (7450 pixels) 600 x 600 dpi One Scan Multi-Copying Sort memory : (Std.) 8 MB (Max.) 136 MB Single sided : 250 sheets Double sided : 125 sheets Sheets, books and three-dimensional objects Automatic feeding : A3 to A5-R Manual feeding : A3 to A5-R 60 sec. or less (e-STUDIO16), 70 sec. or less (e-STUDIO20/25) 7.9 sec. or less (e-STUDIO16), 6.0 sec. or less (e-STUDIO20/25) Up to 999 copies (numeric key entry) Preset ratio : 50, 71, 82, 141, 200% Zoom : 50 to 200% (e-STUDIO16), 25 to 400% (e-STUDIO20/25)** (in 1% increments) Cassette: 64 to 80 g/m 2 550 sheets (Height of 60.5 mm or less when loaded) Automatic plus manual selection from 7 steps 220-240 VAC, 50/60 Hz 1.4 KW or less (e-STUDIO16), 1.7 KW or less (e-STUDIO20/25) 110-127 VAC, 50/60 Hz 1.4 KW or less (for Saudi Arabia 100V version only) 530 mm (W) x 554 mm (D) x 600 mm (H) Applox. 50 kg Specifications and appearance are subject to change without notice. * Requires optional memory and varies depending upon originals used and amount of memory installed. ** When the original is scaned in the automatic document feeder (optional) or reversing automatic document feeder (optional), the reproduction ratio of 50% to 200% can be specified. Downloaded From ManualsPrinter.com Manuals 10-4SPECIFICATIONS & OPTIONS Automatic Duplexing Unit Model Name Acceptable Originals Power Source Dimensions Weight MD-0101 Maximum A3 Minimum A5-R Paper weight 64 to 80 g/m2 Supplied from the copier 101 mm (W) x 488 mm (D) x 345 mm (H) Approx. 4.3 kg Paper Feed Unit Model Name Acceptable Paper Size Acceptable Paper Weight Cassette Capacity Power Source Dimensions Weight MY-1015 A3, A4, FOLIO, A4-R, B4, A5-R, LT, LT-R 64 to 80 g/m2 550 sheets (Height of 60.5 mm or less when loaded) Supplied from the copier 530 mm (W) x 536 mm (D) x 112 mm (H) Approx. 7.7 kg Paper Feed Pedestal/Large-capacity Feeder (for e-STUDIO20/25 only) Model Name Type Number of Cassettes Acceptable Paper Size Acceptable Paper Weight Cassette Capacity Power Source Dimensions Weight KD-1009 (Paper Feed Pedestal) Console Type One A3, A4, FOLIO, A4-R, B4, A5-R, LT, LT- R 64 to 80 g/m2 550 sheets (Height of 60.5 mm or less when loaded) Supplied from the copier Approx. 17 kg 2. SPECIFICATION OF OPTIONS (Cont.) Specifications and appearance are subject to change without notice. KD-1010 (Large-capacity feeder) A4 2500 sheeets Approx. 23 kg 530 mm (W) x 536 mm (D) x 305 mm (H) Downloaded From ManualsPrinter.com Manuals 10-6SPECIFICATIONS & OPTIONS Stack Feed Bypass Model Name Acceptable Paper Loading Capacity Power Source Dimensions Weight MY-1016 Continuous feed: 64 to 80 g/m 2 Single sheet feed: 80 to 163 g/m2 100 sheets (Height of 16 mm or less when loaded) Supplied from the copier 485.1 mm (W) x 119.6 mm (D) x 227.4 mm (H) Approx. 2.6 kg Stapler Model Name Type of Stapling Number of Sheet Stapled Staple Capacity Power Source Dimensions Weight KK-1600 Flat Clinch Method Up to 50 sheets of 52 to 80 g/m 2 paper Up to 48 sheets of 52 to 80 g/m 2 paper + 2 sheets of 200 g/m2 paper Paper thickness: Max. 5.5 mm 5000 staples Supplied from the copier 257 mm (W) x 423 mm (D) x 173 mm (H) Approx. 3.4 kg 2. SPECIFICATION OF OPTIONS (Cont.) Finisher (for e-STUDIO20/25 only) MJ-1011 A3, A4, A4-R, A5-R, B4, B5, B5-R 60 to 80 g/m2 30 sheets (A4, A4-R, B5, LT, LT- R) 20 sheets (B4) 15 sheets (A3) Rear Supplied from the copier 431 mm (W) x 541 mm (D) x 413 mm (H) Approx. 18.6 kg *Specifications and appearance are subject to change without notice. Model Name Copy Size Paper Thickness Number of Copies Staple at a Time (64 to 80 g/m 2) Stapling Position Power Source Dimensions Weight Downloaded From ManualsPrinter.com Manuals 10-8SPECIFICATIONS & OPTIONS 4. COPY FUNCTION COMBINATION MATRIX e-STUDIO16/20/25 Copy Function Combination Table The reason why the combination is not available.*1When 2nd function is programmed, the 1st function is cleared. *2When 2nd function is programmed, the magnification ratio is reset to 100%. *3When 2nd function is programmed, the magnification ratio is reset to 100% and the Paper-Auto function is selected automatically. *4When 2nd function is programmed, the Lighten/Darken is reset to “Auto” mode. *5It is impossible to change the magnification ratio manually. *6When 2nd function is programmed, the Paper-Auto is reset and A4 or LT size paper is selected automatically. *7The annotation is added only on the leading edge of copy output in transportation direction. Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 No No No No No No No Yes *F Ye s Ye s Ye s No *1 No No No Ye s No *5 Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Ye s No *5 No *5 Yes *A Yes *A Ye s Ye s Ye s Ye s No *1 Ye s Ye s Ye s No Ye s No Zoom (Manual) *BLight/Dark(Auto/Manu) Dual Page Edge Erase *C Image Shift *D APS AMS Text Mode Photo Mode Text/Photo Sort Sort-Offset Offset Magazine Sort2-in-1/4-in-1(Include Duplex) Page Number Page Number & Date 1->2 2->1 2->2Bypass(Undefined Size) X-Y Zoom Neg/Pos Mirror Alternation Book -> 2 Staple Mix Size 2nd FunctionOffsetSort-OffsetSortText/PhotoPhoto ModeText ModeAMSAPSImage Shift *DEdge Erase *CDual PageLighter/Dark(Auto Manu) Zoom (Manual) *B Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *2 Ye s Ye s No No *6 No *1 *2 Ye s Ye s Ye s Ye s Ye s No No No No *7 No *7 Ye s No No No No *2 No No Ye s No Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s No No Ye s Ye s Ye s Ye s No Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No No No Ye s Ye s No *2 Ye s No Ye s Ye s No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s*F No *1 Ye s Ye s No No Ye s Ye s No *2 Ye s No Ye s Ye s No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s*F No *1 Ye s Ye s Ye s No Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Yes *A Yes *A Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Yes *E Yes *E Yes *E Yes *E Yes *E Yes *E Yes *E Yes *F Ye s No No No *1 Yes *E No Yes *E Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s No *1 No *1 Ye s Ye s Ye s Ye s Ye s Ye s Ye s Yes *F Ye s No No No *1 Ye s No Ye s 1st Function Downloaded From ManualsPrinter.com Manuals 10-10SPECIFICATIONS & OPTIONS Downloaded From ManualsPrinter.com Manuals
4-9 1 2 3 4 5 6 7 9 10 11 128 9 7 5 3 1 Note This copying mode requires the reversing automatic document feeder (optional) to be installed. 1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears. 2 Confirm that “DUPLEX” is highlighted on the screen. Then press the key. 3 Select “2 > 1” by pressing the key. Then press the key. Press the key to return to the initial screen for copying. 4 Select the desired paper cassette, reproduction ratio, image density and copy quantity. The automatic paper selection mode is selected as the default mode. 5 Place the originals on the feed tray. 6 Press the key. READY 1 DUPLEX :1 > 1 DUAL TYPE :OFF IMAGE SHIFT:OFF 2-Sided Originals > 1-Sided Copies How to place originals Always set originals vertically. If originals are set horizontally, the copies will be output upside down alternately. 9 7 5 3 1 DUPLEX 1 Original > Copy 2 > 2 2 > 1 Downloaded From ManualsPrinter.com Manuals