Home > Toshiba > Printer > Toshiba E Studio 200S User Manual

Toshiba E Studio 200S User Manual

Download as PDF Print this page Share this page

Have a look at the manual Toshiba E Studio 200S User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

$Page 137 1 2 3 4 5 6 7 9 10 11 128 1-2BEFORE MAKING COPIES 1. DESCRIPTION OF THE OPTIONAL EQUIPMENT A Re Stapler $KK-1600$ Job separ Offset tr A Stac P P e-STUDIO16 e-STUDIO20/25 Stapler $KK-1600$ A $MD-0101$ Stac $MY A Re Finisher including br \(e-STUDIO20/25 only$ P Large Capacity F $KD-1010$** $e-STUDIO20/25 only$ * * Furoption f\) can be installed in KD- 1009. Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Control Panel IMAGE MODE Y selected image mode illuminates...$

137

138

139

140

$Page 141 1 2 3 4 5 6 7 9 10 11 128 1-2BEFORE MAKING COPIES 1. DESCRIPTION OF THE OPTIONAL EQUIPMENT A Re Stapler $KK-1600$ Job separ Offset tr A Stac P P e-STUDIO16 e-STUDIO20/25 Stapler $KK-1600$ A $MD-0101$ Stac $MY A Re Finisher including br \(e-STUDIO20/25 only$ P Large Capacity F $KD-1010$** $e-STUDIO20/25 only$ * * Furoption f\) can be installed in KD- 1009. Downloaded From ManualsPrinter.com Manuals BEFORE MAKING COPIES Control Panel IMAGE MODE Y selected image mode illuminates...$

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

View all the pages

Add page 141 to Favourites

image text

Enable zoom

							1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
 A Re
 Stapler \(KK-1600\)
 Job separ Offset tr
 A
 Stac
 P
 P
e-STUDIO16
e-STUDIO20/25
 Stapler \(KK-1600\)
 A
\(MD-0101\)
 Stac
\(MY
 A
 Re
 Finisher including 
br
\(e-STUDIO20/25 only\)
 P
Large Capacity F
 \(KD-1010\)**
\(e-STUDIO20/25 only\)
*
*
Furoption f\) can be installed in KD-
1009.
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Control Panel
IMAGE MODE
Y
selected image mode illuminates
Message Display Panel
Displa
g
LIGHT/DARK
Use this k
PAPER SUPPLY
Y
ZOOM
Y
FINISHING
Y
COPY
Press this k
in the COPY mode in detail.
Paper Jam Lamp
This lamp b
Recording Paper Lamp
This lamp b
Toner Lamp
This lamp illuminates when the toner is about to r
PC Communication Lamp
This lamp is not used in the COPY mode
This lamp b
in the PRINTER mode
FAX Communication Lamp
This lamp is not used in the COPY mode
This lamp b
2. DESCRIPTION OF THE DIGITAL COPIER (Cont.)
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
When the po
the copier is controlled using the depar
P
The Message Displa
settings using br
Message Display Panel
2. DESCRIPTION OF THE DIGITAL COPIER (Cont.)
Message
Light/Dar
Zoom P
selected paper source
Finishing
READY
PAPER
 A4 :AUTO
FINISHING
 EDIT
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Changing the Paper Size of the Cassette
The paper siz
procedure
3
Push the right (unlock) side of the size selection
lever to unlock it.
4
While pushing the size selection lever in the direction
of the arrow, set the side guide to the desired paper
width (as indicated on the bottom surface of the
cassette).
2
Move the width guide to the desired paper size
position (as indicated on the bottom surface of the
cassette).
1
Pull the cassette out until it stops.
3. PAPER (Cont.)
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
3. PAPER (Cont.)
Turning ON the Power Switch / Auto Job Start
Turning On the Power Switch
2
The “Ready”  message  appears.

Auto Job Start
READY
PAPER
:AUTO
FINISHING
 EDIT
While the copier is w
select the desired cop
 key
W
When the machine reaches its proper oper
cop
Tip
E
 k
the cop
auto job star
 key
1
Open the power switch cover and turn ON the switch.

the basic screen :
Please w
W
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
7
Repeat steps 4 to 6 to specify the paper size for other
paper cassettes, as necessary.
8
Press the  key to return to the initial screen for
copying.
3. PAPER (Cont.)
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Downloaded From ManualsPrinter.com Manuals
HO
1. GENERAL COPYING PROCEDURE
When or k
the initial \(def
copies to be made
1
Place originals.

Add page 142 to Favourites

image text

Enable zoom

							7-21
1
2
3
4
5
6
7
9
10
11
128
1
Making sure that the stack feed bypass, the
automatic duplexing unit and the side cover are
opened, open the exit cover.
2
Open the offset tray cover or job separator cover (if
installed).Paper Misfeeds in the Exit Unit
3
Remove any misfeed paper inside the exit unit.
4
After removing all paper, close the offset tray cover
or job separator cover (if installed). Close the exit
cover and the right side cover.  Return the duplex
unit to its normal position (if installed).
Downloaded From ManualsPrinter.com Manuals

Add page 143 to Favourites

image text

Enable zoom

1
2
3
4
5
6
7
9
10
11
128
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE OPTIONAL EQUIPMENT
Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011)
Stapler (KK-1600)
Job separator (MJ-5001) Offset tray (MJ-5002)
Automatic duplexing unit (MD-0101)
Stack feed bypass (MY-1016)
Paper feed unit (MY-1015)
Paper feed pedestal (KD-1009)
e-STUDIO16
e-STUDIO20/25
Stapler (KK-1600)
Automatic duplexing unit
(MD-0101)
Stack feed bypass
(MY-1016)
Automatic document feeder (MR-2012)
Reversing automatic document feeder (MR-3011)
Finisher including Transportation
bridge (MJ-1011)*
(e-STUDIO20/25 only)
Paper feed unit (MY-1015)
Large Capacity Feeder
(KD-1010)**
(e-STUDIO20/25 only)
* The Job separator (MJ-5001) or Offset tray (MJ-5002) can be installed in place of the Finisher.
** The Paper feed pedestal (KD-1009) can be installed in place of the Large capacity feeder (KD-1010).
Furthermore, the Cassette module (MY-1017) (option for e-STUDIO20/25) can be installed in KD-
1009.
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Control Panel
IMAGE MODE
You can switch between the image modes (Text, Text/Photo and Photo) for copying. The lamp of the currently
selected image mode illuminates.
Message Display Panel
Displays the copier conditions, operating procedures, and various instructions and information to the user in text and
graphics.
LIGHT/DARK
Use this key when making a copy to specify the copy density.
PAPER SUPPLY
You can specify from which paper cassette you would like to feed paper for making a copy.
ZOOM
You can specify the scaling factor for copying.
FINISHING
You can specify how you would like to output copies (including Sort and Offset).
COPY
Press this key to switch from the other modes to the COPY mode. This manual describes the settings and operation
in the COPY mode in detail.
Paper Jam Lamp
This lamp blinks when an original or copy paper is jammed.
Recording Paper Lamp
This lamp blinks in the COPY mode when no paper is loaded in the selected paper cassette.
Toner Lamp
This lamp illuminates when the toner is about to run out or runs out completely.
PC Communication Lamp
This lamp is not used in the COPY mode.
This lamp blinks while the copier is serving as a printer and communicating with your computer, while it is printing out
in the PRINTER mode, or while it is communicating as a local scanner.
FAX Communication Lamp
This lamp is not used in the COPY mode.
This lamp blinks while the copier is communicating in the FAX mode.
2. DESCRIPTION OF THE DIGITAL COPIER (Cont.)
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
When the power is turned on, the following basic screen is shown on the Message Display Panel. (When
the copier is controlled using the department code, a different screen is display.
Page 1-13)
The Message Display Panel indicates the copier’s status. It also illustrates operational procedures or
settings using brief sentences or icons.
Message Display Panel
2. DESCRIPTION OF THE DIGITAL COPIER (Cont.)
Message Copy quantity
Light/Dark
Zoom Paper size of the currently
selected paper source
Finishing
READY
PAPER
A4 :AUTO
FINISHING
EDIT
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Changing the Paper Size of the Cassette
The paper size of the copier’s cassettes can be changed to appropriate paper sizes using the following
procedure.
3
Push the right (unlock) side of the size selection
lever to unlock it.
4
While pushing the size selection lever in the direction
of the arrow, set the side guide to the desired paper
width (as indicated on the bottom surface of the
cassette).
2
Move the width guide to the desired paper size
position (as indicated on the bottom surface of the
cassette).
1
Pull the cassette out until it stops.
3. PAPER (Cont.)
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
3. PAPER (Cont.)
Turning ON the Power Switch / Auto Job Start
Turning On the Power Switch
2
The “Ready” message appears.
This message indicates that the copier is ready for operation.
Auto Job Start
READY
PAPER
:AUTO
FINISHING
EDIT
While the copier is warming up, place the original on the glass,
select the desired copy modes and press the
key.
Wait warming up:Auto Start
When the machine reaches its proper operating temperature,
copying will automatically star t.
Tip
Even after you have pressed the
key, you can change
the copy modes if copying has not yet started. To cancel the
auto job start mode, press the
key.
1
Open the power switch cover and turn ON the switch.
This message appears on the message display panel of
the basic screen :
Please wait
Wait warming up
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
7
Repeat steps 4 to 6 to specify the paper size for other
paper cassettes, as necessary.
8
Press the key to return to the initial screen for
copying.
3. PAPER (Cont.)
Downloaded From ManualsPrinter.com Manuals
BEFORE MAKING COPIES
Downloaded From ManualsPrinter.com Manuals
HOW TO MAKE COPIES
1. GENERAL COPYING PROCEDURE
When originals are set and the key is pressed with all settings unchanged, copies are made using
the initial (default) settings (*1). By selecting various copy modes, you can alter the number and type of
copies to be made.
1
Place originals.
When placing an original on the glass: Page 2-5
When placing originals facing up in the automatic document
feeder (optional) or the reversing automatic document feeder
(optional):
Page 2-6 The initial (default) settings of the copier at the time of installation
are as shown on the right. You can change these initial settings.
Page 5-18
*1 The copy modes that are automatically set when the power
is turned on or when the
key is pressed on the
control panel are called the initial (default) settings.
Copying Procedure
Reproduction ratio ........... 100%
Copy quantity ................... 1
Automatic paper selection
1-side copies from 1-side originals
Automatic image density
Text/photo mode
Non-sort mode
Initial settings
Original scale
Original
Slide
Automatic
document
feeder
Downloaded From ManualsPrinter.com Manuals
HOW TO MAKE COPIES
2. SETTING ORIGINALS
Originals
The following specifications apply to originals that can be used with this copier:
Remarks
Do not place any
heavy object (4 kg
or over) on the
glass.
Some of the
originals on the
left may not be
used depending
on type or
thickness.
(For details,
consult your
service
technician.)
Some of the
originals on the
left may not be
used depending
on paper quality. Maximum
number that
can be set
50 originals
(50 to 80 g/m
2) or
stacked height of
originals 8 mm
or less
100 originals
(50 to 80 g/m
2)
or stacked
height of
originals 16 mm
or less Size capable of
automatic
detection
Regular size
A/B format:
A3, A4, A4-R,
A5-R, FOLIO, B4
(for e-STUDIO20/
25 only)
Regular size
A/B format:
A3, A4, A4-R,
A5-R, FOLIO, B4
Regular size
A/B format:
A3, A4, A4-R,
A5-R, FOLIO, B4 Types of original
Sheets
Three-dimensional
objects Books
Plain paper, thermal
paper (for word
processor or fax), long
originals, originals with
filing holes (2-, 3- and
4- holes):
50 to 105 g/m
2
(Multi-sheet feeding)
50 to 127 g/m
2
(1-sheet feeding)
Plain paper, thermal
paper (for word
processor or fax), long
originals, originals with
filing holes (2-, 3- and
4- holes):
50 to 127 g/m
2
(1-sided original)
50 to 105 g/m
2
(2-sided original) Setting
place
Glass
Automatic
document
feeder
(optional)
Reversing
automatic
document
feeder
(optional)
Maximumsize
Width
: 302 mm
Length
: 432 mm
Width
: 297 mm
Length
: 432 mm
Width
: 297 mm
Length
: 432 mm
Downloaded From ManualsPrinter.com Manuals
HOW TO MAKE COPIES
Using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (option)
2. SETTING ORIGINALS (Cont.)
1
After aligning the edges of the originals well, place
them on the original feed tray facing up and align
the slides to the width of the originals.
Slide
Downloaded From ManualsPrinter.com Manuals
HOW TO MAKE COPIES
3. INTERRUPT COPYING
The interrupt copy is a convenient feature that allows the user to pause a job that is currently in progress.
1
Press the key.
This message appears:
Job interrupted
The
key illuminates during the INTERRUPT copying.
Note
One interrupt copy can be made from multiple originals by
placing them on the glass one at a time.
2
Place the original.
If the previous original remains on the glass, open the original
cover or automatic document feeder (optional) or the
reversing automatic document feeder (optional) and replace
it with the original to be interrupt-copied.
3
Press the key.
Repeat steps 2 to 4 if you need to interrupt copying again.
4
After interrupt copying is finished, press the
key again.
When the following is shown on the Message Display, press
the
key and perform the interrupted jobs.
Ready to resume job.
Ready to resume job
PAPER
FINISHING
EDIT
Downloaded From ManualsPrinter.com Manuals
BASIC MENU
1. PAPER SELECTION
Automatic Paper Selection (APS)
When the power switch is turned ON, the Automatic Paper Selection (APS) mode is selected as the
default mode.
In this mode, when a regular-sized original is loaded for copying, the copier detects the original size
automatically and selects a same paper size as the original size. For the e-STUDIO16, when the original
is placed on the glass for copying, the copier cannot detect its size automatically. A message appears
prompting the user to specify the size of the original.
* This mode can only be used for actual-size (100%) copying.
* For automatically selectable original sizes:
Page 2-4
1
Check that APS mode is selected in the upper left
portion of the Message Display.
4
Enter the desired copy quantity using numeric keys.
A copy quantity up to 999 can be keyed in.
The copy quantity default is set at one.
When an incorrect quantity is set, press the
key
and key in the correct number.
If you press the
key, all current copier settings will
be cleared, and returned to the default settings.
3
Select desired copy mode.
2
Place the original(s) on the original feed tray or on
the glass.
READY
PAPER
:AUTO
FINISHING
EDIT
5
Press the key.
If the following messages are shown;
Change the direction of original(s).
Change direction of original.
Load the cassette containing paper in the same size as
the original.
Set correct cassette
Add paper in the cassette.
Add Paper
Downloaded From ManualsPrinter.com Manuals
BASIC MENU
1. PAPER SELECTION (Cont.)
Manual Paper Selection
Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with dark
borders, or non-regular sized originals such as newspaper and magazines, may be incapable of automatic
paper selection. For these types of originals, use the manual paper selection.
1
Press the key with the initial screen shown in
the COPY mode.
2
Use the or keys and select the paper
cassette that you would like to feed paper from.
Please note that the cassettes must be pre-defined with the
size of paper loaded.
Page 1-8
3
Place the original(s) on the original feed tray or on
the glass.
(“Setting Original”.
Page 2-4)
4
Select desired copy mode and quantity as required.
5
Press the key.
READY
PAPER
SUPPLY:
:A4
:B4
Downloaded From ManualsPrinter.com Manuals
BASIC MENU
1. PAPER SELECTION (Cont.)
5
Enter the desired copy quantity using the numeric
keys.
6
Press the key.
Tip
If the paper misfeeds in the bypass and the Paper Jam Lamp
flashes, remove the sheets from the bypass and replace
them.
Page 7-14.
If the size of paper to be loaded is not identical to one
specified in the default setting, the default settings must be
reset.
Page 1-11.
Downloaded From ManualsPrinter.com Manuals
BASIC MENU
2. REDUCTION AND ENLARGEMENT COPYING
There are four methods available for enlargement and reduction copying.
Using Automatic Magnification Selection (AMS):
After selecting the AMS mode and copy size, the copier automatically detects the size of the original
and calculates the appropriate reproduction ratio. For the e-STUDIO16, when the original is scanned
on the glass, the user must to manually specify the size of the original.
REDUCE/ENLARGE:
When a regular-sized original and copy paper are used, select a ratio corresponding to the paper size.
Selectable Ratio:
Using Automatic Magnification Selection (AMS)
1
Press the key.
ZOOM UP/DOWN:
The Down and Up arrow keys select the desired reproduction ratio at 1% increments.
XY ZOOM:
This function allows you to alter the reproduction ratio in the X and Y directions of your copies.
* Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with
dark borders, or non-regular sized originals such as newspaper and magazines, may be incapable of
automatic magnification selection. For these types of originals, use the reduction/enlargement modes.
Ratio
50%
71%
82%
141%
200%
Original/Copy
A3/A5-R
A3/A4-R, A4-R/A5-R, B4/B5-R
B4/A4-R, B5-R/A5-R
A4-R/A3, A5-R/A4-R, A5/A4, B5-R/B4
A5-R/A3
Downloaded From ManualsPrinter.com Manuals
BASIC MENU
2. REDUCTION AND ENLARGEMENT COPYING (Cont.)
Reduce/Enlarge
5
Place the original to be copied in the feeder or on
the glass, key in the copy quantity, and press the
key.
1
Select the appropriate paper cassette.
(Manual Paper Selection
Page 3-3.)
2
Press the key or key.
Press the key and go to step 3,
or press the
key and go to step 4.
3
Use the or keys and select “REDUCE/
ENLARGE.” Press the
key.
4
Select the desired reproduction ratio using the
or key. Press the key.
You must to manually specify the size of the original.
READY
PAPER
A4 :AUTO
FINISHING
EDIT
When a regular-sized original and copy paper are used, select a ratio corresponding to them.
READY
ZOOM:
AMS
REDUCE/ENLARGE
ZOOM
REDUCE
/ENLARGE:
82% B4 > A4
141% A4 > A3
200% A5 > A3
Downloaded From ManualsPrinter.com Manuals
BASIC MENU
X-Y Zoom
This function allows you to alter the reproduction ratio in the X and Y directions of your copies.
1
Press the key on the control panel.
2
Press the key to display “XY ZOOM.” Then
press the
key.
3
Specify the X and Y reproduction ratios.
Select the X or Y direction using the or key and specify
the reproduction ratio using the
or key. Then
press the
key to accept the reproduction ratio.
When the original is scanned on the original glass, the
reproduction ratio can be specified to 50 % to 200 % for the
e-STUDIO16, and 25 % to 400 % for the e-STUDIO20/25.
When the original is scanned in the automatic document
feeder (optional) or reversing automatic document feeder
(optional), the reproduction ratio of 50 % to 200 % can be
specified.
4
“Xxxx-Yxxx%” appears next to zoom on the display.
5
Select the desired paper cassette, image density and
copy quantity.
6
Place the original on the glass or the feed tray and
press the
key.
READY
ZOOM:
ZOOM UP/DOWN
XY ZOOM
ZOOM
XY ZOOM:
X
50%
READY
PAPER
A4 :AUTO
FINISHING
EDIT
100%200%
100%
200%
2. REDUCTION AND ENLARGEMENT COPYING (Cont.)
Downloaded From ManualsPrinter.com Manuals
BASIC MENU
3
Press the or key to select the desired image
density.
To produce lighter copies, press the key. Each time you
press the
key, the density-indicating mark moves one
step to the left and your copies are produced proportionally
lighter.
To produce darker copies, press the
key. Each time you
press the
key, the density-indicating mark moves one
step to the right and your copies are produced proportionally
darker.
4
When the key is pressed after density is set, the
screen returns to the initial screen for copying.
The specified copying density appears on the message
display.
5
Place the original to be copied in the feeder or glass
and press the
key.
Copies are made in the selected image density.
LIGHT/DARK
MANUAL:
-3-2-10+1+2+3

READY
PAPER
A4 : 2
FINISHING
EDIT
3. COPYING WITH COPY DENSITY SELECTION (Cont.)
Downloaded From ManualsPrinter.com Manuals
BASIC MENU
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
1. DUPLEX COPYING
This function allows you to set the type of originals (1-sided, 2-sided or book-type) and the desired type
of copying (1-sided or 2-sided).
Original Copy
*, , and require the optional automatic duplexing unit to be
installed.
*
and require the optional reversing automatic document feeder
to be installed.
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
1-Sided Originals > 2-Sided Copies
There are two methods of making duplexed copies from single-sided originals:
Using the automatic document feeder (optional) or reversing automatic document feeder (optional)
- For duplex-copying from sheet originals of the specified sizes and weights.
Setting originals on the glass - For duplex-copying from originals that cannot be handled by the automatic
document feeder (optional) or the reversing automatic document feeder (optional).
Note
This copying mode requires the automatic duplexing unit (optional) to be installed.
1. DUPLEX COPYING (Cont.)
When using the Automatic Document Feeder (optional) or
the Reversing Automatic Document Feeder (optional)
1
Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
2
Confirm that “DUPLEX” is highlighted on the screen.
Then press the
key.
3
Select “1 > 2” by pressing the key.
Then press the
key. Press the key to return
to the initial screen for copying.
4
Select the desired paper cassette, image density,
reproduction ratio and copy quantity.
5
Place the originals on the feed tray.
6
Press the key.
READY
DUPLEX
DUAL TYPE
IMAGE SHIFT:OFF
DUPLEX
Original > Copy
1 > 1
1 > 2
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
When Placing the Original on the Glass
1
Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
2
Confirm that “DUPLEX” is highlighted on the screen.
Then press the
key.
3
Select “1 > 2” by pressing the key.
Then press the
key. Press the key to return
to the initial screen for copying.
4
Select the desired paper cassette, image density,
reproduction ratio and copy quantity.
5
Place the first page of the originals (first side) on
the glass.
6
Press the key.
For the e-STUDIO16, when the automatic paper selection
(APS) mode or automatic magnification selection (AMS) is
selected, a message appears prompting you to specify the
size of the original that you would like to copy.
Use the
or key to specify the size of the original.
Then press the
key. The copier will start scanning the
original.
7
Place the next original (second side) on the glass.
8
Press the key.
READY
DUPLEX
DUAL TYPE
IMAGE SHIFT:OFF
1. DUPLEX COPYING (Cont.)
Next original?
YES
NO
DUPLEX
Original > Copy
1 > 1
1 > 2
Select original size
A4
A3
A4-R
A5-R
B4
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
2-Sided Originals > 2-Sided Copies
Placing two sided originals on the reversing automatic document feeder (optional) and pressing the
key feeds the original and scans the first side of the original into memory.
The original and the sheet are then turned over automatically and the second side of the original is
scanned into memory. Once both sides of all originals are scanned, the desired copies are printed.
You can set up to 100 A4 size (64 to 80 g/m
2) originals at a time.
Note
This copying mode requires the reversing automatic document feeder (optional) and the automatic
duplexing unit (optional) to be installed.
1
Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
2
Confirm that “DUPLEX” is highlighted on the screen.
Then press the
key.
3
Select “2 > 2” by pressing the key.
Then press the
key. Press the key to return
to the initial screen for copying.
4
Select the desired paper cassette, reproduction ratio,
image density and copy quantity.
The automatic paper selection mode is selected as the
default mode.
5
Place the originals on the feed tray.
6
Press the key.
READY
DUPLEX
DUAL TYPE
IMAGE SHIFT:OFF
1. DUPLEX COPYING (Cont.)
DUPLEX
Original > Copy
1 > 2
2 > 2
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
This copying mode requires the automatic duplexing unit (optional) to be installed.
1
Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
2
Confirm that “DUPLEX” is highlighted on the screen.
Then press the
key.
3
Select “BOOK > 2” by pressing the key.
4
Press the key.
7
Specify the Book Margin then press the key, as
necessary.
Press the or key to specify the Book Margin.
Each time either of the keys is pressed, a value is
incremented or decremented by 1mm.
Press the
key to increment, or key to
decrement the value.
Specify the value within a range of 8 mm to 30 mm.
6
Press the key.
READY
DUPLEX
DUAL TYPE
IMAGE SHIFT:OFF
Book-Type Originals > 2-Sided Copies
5
Select the start and end page.
Select the desired copy mode using the or
key.
RIGHT > RIGHT
Copying is star ted from a right page of the book and it ends
on a right page.
RIGHT > LEFT
Copying is star ted from a right page of the book and it ends
on a left page.
LEFT > LEFT
Copying is started from a left page of the book and it ends
on a left page.
LEFT > RIGHT
Copying is started from a left page of the book and it ends
on a right page.
1. DUPLEX COPYING (Cont.)
DUPLEX
Original > Copy
2 > 1
BOOK > 2
BOOK > 2
RIGHT > RIGHT
RIGHT > LEFT
LEFT > LEFT
8
Press the key.
BOOK MARGIN
30mm
15mm
8mm
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
8
Press the key.
2. DUAL PAGE COPYING
The facing pages of a book or magazine are copied one at a time onto two separate sheets of paper. You
need not move the original on the glass. Two A4 size originals placed side by side on the glass can also
be copied onto two separate sheets of paper.
Example of Dual Page Copying
1
Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
2
Press the key to display the “DUAL PAGE” in
reverse. Then press the
key.
3
Press the key and select “ON.” Then press the
key
Upon selecting “ON”, you are given an opportunity to select
the appropriate book margin. Any value ranging from 8 mm
to 30 mm is acceptable.
When 20 mm is entered, a line that appears at the center of
the copy is masked in a range of 20 mm. When a copy is
made, a 10 mm margin is established on both sides of the
line.
When both the Edge Erase width and the Book Margin are
specified, a bigger value would be specified for the margin.
4
“DUAL PAGE: XXmm” appears. Press the key
to return to the initial screen for copying.
5
Select the A4 paper cassette.
6
Place the original on the glass.
7
Select the desired image density, etc. as required.
Only 100 % of reproduction ratio is acceptable.
READY
DUPLEX
DUAL PAGE
IMAGE SHIFT
READY
DUPLEX
DUAL PAGE
IMAGE SHIFT
DUAL PAGE
OFF
ON
BOOK MARGIN
30mm
8 mm
8mm
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
7
Select the desired paper cassette, image density,
reproduction ratio and copy quantity.
8
Press the key.
4. EDGE ERASE COPYING
If the edges of an original are torn or dirty, they are reproduced as black stains on the copy.
Using the edge erase mode, a white border will be created along the outside edges of the copy eliminating
the marks. The default edge erase margin is 10 mm, but you can select any margin within the range of 4
to 20 mm.
Example of Edge Erase Copying
1
Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
2
Press the key to display “Edge Erase.” Then
press the
key.
3
Press the key and select the “ON.”
Then press the
key.
4
The current edge erase margin appears on the
screen. To change the edge erase margin, select
the desired margin by using the
or key.
Then press the
key.
The edge erase margin changes at increments of 1 mm.
5
The selected edge erase margin appears on the
screen. Press the
key to return to the initial
screen for copying.
6
Place the original(s) on the feed tray or on the glass.
READY
DUAL PAGE
IMAGE SHIFT
EDGE ERASE
READY
DUAL PAGE
IMAGE SHIFT
EDGE ERASE
EDGE ERASE
OFF
ON
EDGE ERASE
20mm
10mm
4mm
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
5. 2-IN-1/4-IN-1 (Cont.)
5
Select the type of original and copy.
6
Press the key.
7
What is selected appears on the screen.
Press the
key to return to the initial screen for
copying.
8
Select the desired paper cassette, image density, and
copy quantity.
9
Press the key.
2IN1
Original > Copy
2 > 2
2 > 1
READY
IMAGE SHIFT
EDGE ERASE
2IN1/4IN1
Note
To select the paper cassette, press the
key, select AMS
and then select the desired paper cassette.
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
The magazine sort mode allows you to copy and sort originals so that the copies can be folded in half
along the inside as if you were making a magazine.
Note
This copying mode requires the optional automatic duplexing unit (optional) to be installed.
Example of magazine sort
6. MAGAZINE SORT
27 188765432145 36
1
Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
3
Press the key to display “ON.” Then press the
key.
4
Press the key and specify whether the originals
are single-side or duplex. Then press the
key.
5
“MAGAZINE SORT: X>2” appears. Press the
key to return to the initial screen for copying.
6
Select the desired image density and copy quantity.
READY
EDGE ERASE
2IN1/4IN1
MAGAZINE SORT
READY
EDGE ERASE
2IN1/4IN1
MAGAZINE SORT
2
Press the key to display “MAGAZINE SORT.”
Then press the
key.
MAGAZINE SORT
OFF
ON
MAGAZINE SORT
Original > Copy
1 > 2
2 > 2
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
9
For the subsequent originals, repeat step 8 above.
10
When scanning of the last original has finished,
select “NO.”Next Original?
YES
NO
11
Press the key.
6. MAGAZINE SORT (Cont.)
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
Tip
In the annotation function, printing is performed along the lead-
edge of the paper selected. This may be the top or the side of
copy depending upon the orientation of the copy paper.
Therefore, place the original with its top facing the paper output
side of the machine.
6
Place the original on the glass and press the
key.When Placing the Original on the Glass
7
Select “YES,” set the next original and press the
key.
Next Original?
YES
NO
Next Original?
YES
NO
Memory clear?
YES
NOWhile the “Next Original?” screen is being shown, if the
key is pressed, the scanned data is deleted, and
the ANNOTAION is terminated. Select “YES” or “NO,” and
press the
key.
8
For the next and subsequent originals, repeat step
7 above.
9
When the last original is finished being scanned,
select “NO.”
10
Press the key.
7. ANNOTATION (Cont.)
For the e-STUDIO16, when the automatic paper selection
(APS) mode or automatic magnification selection (AMS) is
selected, a message appears prompting you to specify the
size of the original that you would like to copy.
Use the
or key to specify the size of the original.
Then press the
key. The copier will start scanning the
document.
When the first original has been scanned, the “Next
Original?” screen appears.
Select original size
A4
A3
A4-R
A5-R
B4
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
Negative/Positive Reversal
This function allows you to reverse the black areas on the original as white areas, or vice versa.
* This function is not available with Edge Erase, Sort, Alternation, Duplex copying, Srot/Offset, Dual
Page, 2-in-1/4-in-1, Magazine Sort and Book > 2.
Example of negative/positive reversal
1
Press the key on the control panel while in
the initial screen for copying. The “EDIT MENU”
screen appears.
2
Press the key to display “EDITING.” Then press
the
key.
3
Press the key and select “NEG/POS.” Then
press the
key.
4
“EDITING: NEG/POS” appears. Press the key
to return to the initial screen for copying.
5
Select the desired paper cassette, image density,
reproduction ratio and copy quantity.
6
Place the original on the glass or the feeder tray and
press the
key.
READY
MAGAZINE SORT
ANNOTATION
EDITING
READY
MAGAZINE SORT
ANNOTATION
EDITING
EDITING
OFF
MIRROR
NEG/POS
8. EDITING (Cont.)
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
1
Press the key on the control panel while in
the initial screen for copying.
2
Press the key to display the “MIX SIZE”.
Then press the
key.
3
Press the key to display the “ON”.
Then press the
key.
4
Select the Automatic paper Selection (APS) mode
or Automatic Magnification Selection (AMS) mode.
Then select the desired paper cassette, reproduction
ratio, image density and copy quantity as required.
5
Place the originals on the original feed tray.
6
Press the key.
10. COPYING MIXED SIZE ORIGINALS
Put original in doc. feeder
EDITING
BUILD JOB
MIX SIZE
A set of originals with different paper sizes can be copied together in the same operation, as long as the
originals all have the same width.
Note
This copy function requires the optional reversing automatic document feeder (RADF) be installed.
READY
EDITING
BUILD JOB
MIX SIZE
MIXED SIZE ORIGINAL
OFF
ON
Note
When the “MIX SIZE” is selected, the “APS” is automatically
selected.
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
Recalling a Stored Combination of Copy Modes
1
Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
2
Press the key to display “JOB MEMORY” in
reverse. Then press the
key.
3
Press the key while “RECALL” is selected.
4
Select the desired Job number from “MEMORY1”
to “MEMORY4”. Then press the
key. Press the
key to return to the initial screen for copying.
Tip
When the selected memory location contains a pre-
programmed job, the Job Memory icon is highlighted with a
box.
5
Place the original on the glass or the feed tray and
press the
key. The original is copied in the
combination of modes you have recalled.
READY
EDITING
JOB BUILD
JOB MEMORY
JOB MEMORY
RECALL
MEMORY
MEMORY
MEMORY1
MEMORY2
MEMORY3
MEMORY4
11. JOB MEMORY (Cont.)
Downloaded From ManualsPrinter.com Manuals
EDIT MENU
13. MENU LIST
1
Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
Print out the copier’s menu list.
READY
JOB MEMORY
PAPER TYPE
MENU LIST
MENU LIST
Printing acceptedThe menu list will be printed out.
2
Press the key to display “MENU LIST.” Then
press the
key.
Downloaded From ManualsPrinter.com Manuals
FINISHING MODE SELECTION
1. FINISHING MODE SELECTION
Offset Tray (option)
When the Offset Tray is configured, the copied set are collated
or stacked in groups with each set offset.
Job Separator (option)
The job separator function allows a copied job and an optional
fax job to be output onto separate paper trays.
Stapler (option)
Sets of copies can be manually stapled when the stapler with
work surface is attached. Finisher (option for e-STUDIO20/25 only)
When the Finisher is attached, the OFFSET, SORT/OFFSET,
and STAPLE functions become available.
Tr a y s
Paper
stopper
Note
When longer paper, such as Ledger size, is designated to
output onto the lower tray, please use the paper stopper
attached to the Job Separator. (Do not use the paper stopper
attached to the lower tray.)
Downloaded From ManualsPrinter.com Manuals
FINISHING MODE SELECTION
As sets of copies are output, the sets are sorted.
Example: Making 5 sets of copies from 5-paper originals
*Bypass copying is not possible in the sor t mode.
3. SORT COPYING
1
Place the originals in the feeder.
Confirm that “SORT” is shown for “FINISHING.”
2
If “FINISHING:SORT” is not displayed, press the
key and select the sort mode.
Select “SORT” from the FINISHING menu by pressing the
key. Then press the key.
3
Key in the desired copy quantity (sets) using the
numeric keys.
4
Select the desired paper cassette, image density and
reproduction ratio.
5
Press the key.
The copier starts scanning the original.
Press the
key to stop scanning the original
temporarily. Press the
key to resume scanning.
54321
54321
54321
54321
54321
54321
Press START to resume
PAPER
A4-R :AUTO
FINISHING
If the key is pressed again when scanning has
stopped, the scanned data is deleted and the sort copying
is terminated. Select “YES” or “NO,” and press the
key.
When all originals are scanned, the copier automatically
starts copying. Copies are outputted in sets.
Memory clear?
YES
NO
Tip
NON SORT/OFFSET and SORT/OFFSET can be selected
only when the Offset Tray or Finisher is installed.
READY
FINISHING:
NONSORT/OFFSET
SORT
When Using the Automatic Document Feeder (optional) or
the Reversing Automatic Document Feeder (optional)
Downloaded From ManualsPrinter.com Manuals
FINISHING MODE SELECTION
4. OFFSET COPYING
When the Offset Tray or Finisher is attached, the sets of copies that are collated or stacked in groups are
output in one pile but each set is offset, as illustrated.
Example:Making 6 sets of copies from 3-page originals. (Bypass copying is not possible in the offset
mode.)
1
Place the originals in the feeder or on the glass.
Select the desired number of copies, image density
and reproduction ratio.
3
Select the OFFSET mode.
Select “NONSORT/OFFSET” or “SORT/OFFSET” from the
FINISHING menu by pressing the
key. Then press
the
key.
321
111
2
Press the ke“FINISHING” screen appear
When the offset tray is full, the following message appears:
Remove paper from offset.
Remove the copies from the tray and press the
key to
continue.
Refer to the procedures described in “NON-SORT
COPYING” when “NONSORT/OFFSET” is selected.
Page 6-3
Refer to the procedures described in “SORT COPYING”
when “SORT/OFFSET” is selected.
Page 6-4
READY
FINISHING:
NONSORT/OFFSET
SORT
SORT/OFFSET
Downloaded From ManualsPrinter.com Manuals
6-8FINISHING MODE SELECTION
When Placing the Original on the Glass
2
Select the “AL” mode
Select “ALTERNATION” from the FINISHING menu by
pressing the
key. Then press the key.
3
K
ke
4
Select the desired ima
ratio.
5
Place the original and press the ke
When scanning of the first original has finished, the “NEXT
ORIGINAL?” screen appears.
6
Select “YES,” set the ne
ke
7
For the ne
6.
8
When the last original has been finished being
scanned,“NO”
1
Press the ke“FINISHING” screen appear
Copying
PAPER
A4 :AUTO
FINISHING
The copier starts scanning the original.
Press the
key to stop scanning the original
temporarily. Press the
key to resume scanning.
Press START to resume
PAPER
A4 :AUTO
FINISHING
If the key is pressed again when scanning has
stopped, the scanned data is deleted, and the alternation is
terminated. Select “YES” or “NO” and press the
key.
When all originals are scanned, the copier automatically
starts copying and collates the copies into sets.
Memory clear?
YES
NO
Next Original?
YES
NO
5.
READY
FINISHING:
SORT/OFFSET
ALTERNATION
Downloaded From ManualsPrinter.com Manuals
6-10FINISHING MODE SELECTION
6.
When the optional finisher is installed, you can use the function that automatically staples Maximum
capacity for stapling.
A4, A4-R, B5 (LT, LT-R)30 sheets
B4 20 sheets
A3, FOLIO 15 sheets
When the optional finisher is installed \(option f
ABABAB
FinishSet on the Automatic
Document FeederPlaced on the glass
1
Place the originals in the f
3
Select the “ST” mode
Select “STAPLE” from the FINISHING menu by pressing the
key. Then press the key.
4
K
ke
5
Select the desired ima
ratio.
6
Press the ke
The copier starts copying. In this copying mode, Stapled
each set of copies are ejected.
2
Press the ke“FINISHING” screen appear
When Using the A
the Rever
READY
FINISHING:SORT
SORT/OFFSET
STAPLE
Downloaded From ManualsPrinter.com Manuals
6-12FINISHING MODE SELECTION
To position the staple in parallel with the copy’s top edge,
align them to the guide in the diagonal direction. When sets of copies are inserted aligned to the guide, they will be stapled automatically. The stapling
direction varies depending on the orientation of the sets. This function is only available when the optional
Stapler kit (KK-1600) is installed.
To staple sets of copies diagonally, align them to the guide
in the front.
6.
When the optional Stapler kit is installed
Downloaded From ManualsPrinter.com Manuals
7-2WHEN THE GRAPHIC SYMBOL FLASHES
1. DESCRIPTION OF THE GRAPHIC SYMBOLS
The message display panel shows the status of the copier. When
one of the graphic symbols flashes, go to the pages referenced
and take the recommended action.
Page 7-12 to 23
Page 7-3
Page 7-5
Downloaded From ManualsPrinter.com Manuals
7-4WHEN THE GRAPHIC SYMBOL FLASHES
B
A
1
Pulling up the grip, draw out the large-capacity
feeder carefully until it comes to a stop.
2
Open some paper packages, take out entire reams
of paper and set them aligned in tray
and tray .
When setting the paper, set the paper for to the right
aside, and set it for
to the left aside. (The paper can be
set neatly if you pile up the paper little by little alternately in
the tray
and .) Be sure that the centre lever is not open
(Refer to the labels attached in the large-capacity feeder).
Do not add paper above the line indicated on the guide.
Up to 2500 sheets of paper (recommended by Toshiba) can
be set.
Paper star ts being fed from the elevator tray
at first, and
when it runs out of paper, the paper on tray
moves to the
position
.
Do not use creased, folded, wrinkled or damp sheets of pa-
per.
2. LOADING PAPER (Cont.)
Adding Paper to the Large-Capacity Feeder (option for e-STUDIO20/25)
3
Close the cover of the large-capacity feeder.
Close the cover completely. The elevator tray automatically
moves up to the paper feeding position.
Downloaded From ManualsPrinter.com Manuals
7-6WHEN THE GRAPHIC SYMBOL FLASHES
4
It is possible that the toner may have become caked
in the replacement Toner Cartridge. In order to insure
the toner flows smoothly, shake the new Toner
Cartridge back and forth several times.
5
Pull the tab or remove the sealing tape from the new
cartridge.
6
Install the new Toner Cartridge sliding it into the
copier.
7
After installing the Toner Cartridge, move the charger
wire cleaning lever (in and out) of the Process Unit
several times to clean the charger wire.
3. REPLACING TONER CARTRIDGE (Cont.)
Downloaded From ManualsPrinter.com Manuals
7-8WHEN THE GRAPHIC SYMBOL FLASHES
Replacing Process Unit
1
Open the stack feed bypass.
2
Open the automatic duplexing unit by pulling up on
the release grip. (Not all copiers are equipped with
automatic duplexing units.)
3
Open the side cover of the copier.
4. REPLACING PROCESS UNIT
Note
Do not expose the green drum to light for an extended period. Never expose the drum to direct
sunlight or touch the drum surface. Damage or poor print quality may result. The Process Unit requires replacement when the “Drum life warning” is displayed.
Tip
When “Drum life warning” is displayed, the copier can continue to make copies (1,000 copies). After
copying 1,000 sheets, the message changes to “Replace process unit” and the copier stops.
Downloaded From ManualsPrinter.com Manuals
7-10WHEN THE GRAPHIC SYMBOL FLASHES
4. REPLACING PROCESS UNIT (Cont.)
11
Pull the tab to remove the sealing tape from the
Process Unit.
Important
Never touch the photoconductive drum (the green surface)
of the Process Unit. If the surface is scarred or scratches, it
will cause print quality problems.
Do not expose the photoconductive drum of the process
Unit to light for more than 3 minutes. If the Process Unit is to
be left anywhere outside the copier, be certain to cover it
with cloth, paper, etc.
12
Insert the new Process Unit all the way into the
copier. Then install the Toner Cartridge by reversing
the removal procedure.
Always hold the Process Unit by the colored handle. Do not
touch the green drum area. Do not leave the Process Unit
out of the copier for an extended period of time.
13
After installing the Toner Cartridge, move the
charger wire cleaning lever (in and out) of the
Process Unit several times to clean the charger
wire.
9
Discard the used Process Unit properly.
10
Open the package and take the new Process Unit
out.
8
Grasping the colored handle on top of the Process
Unit, remove the Process Unit from the copier.
14
Close the covers opened during this procedure and
latch the deplexing unit into position (if attached).
Downloaded From ManualsPrinter.com Manuals
7-12WHEN THE GRAPHIC SYMBOL FLASHES
5. CLEARING PAPER JAM
Remove any misfed originals. Use the following procedures to remove an original jammed in
the Reversing Automatic Document Feeder (optional). An original
jammed in the Automatic Document Feeder (optional) can be
removed in the same manner.
1
Press the button to unlock and open the cover.
Paper Misfeeds in the Reversing
Automatic Document Feeder (optional)
When a paper misfeed occurs in the copier, the Paper Jam Lamp flashes and the message below
appears:
An illustration and short description indicates the procedures to remove jammed paper. Press the
or key to scroll through the individual pages of the procedures. Misfeed in xxxx
xxxx represents the position where the transfer error occurred. To clear the error for each position, refer
to the following pages.
Misfeed in copier
Open side cover
of the copier.
1/ 4
Downloaded From ManualsPrinter.com Manuals
7-14WHEN THE GRAPHIC SYMBOL FLASHES
5. CLEARING PAPER JAM (Cont.)
5
Lift the original tray.
When holding the cover to lift up the original tray, please be
careful not to get your fingers caught.
8
Lift the reversing automatic document feeder to
expose the under side. Then press the blue lever to
release the access panel.
6
Remove any misfed originals.
7
Lower the original tray and close the reversing
automatic document feeder cover.
Downloaded From ManualsPrinter.com Manuals
7-16WHEN THE GRAPHIC SYMBOL FLASHES
5. CLEARING PAPER JAM (Cont.)
1
Open the side cover.
2
Remove any misfed paper. Then close the cover. Paper Misfeeds in Paper Feed Pedestal (optional)
B
Paper Misfeed in the Large-Capacity Feeder
(option for e-STUDIO20/25)
2
Remove any misfed paper.
1
Open the cover .
Downloaded From ManualsPrinter.com Manuals
7-18WHEN THE GRAPHIC SYMBOL FLASHES
5. CLEARING PAPER JAM (Cont.)
1
Making sure that the stack feed bypass and the
automatic duplexing unit are opened, open the side
cover.Paper Misfeeds in the Drum/Charger area
2
Press the two blue levers. To release any paper in
the fuser unit.
Caution
As the Fuser Section is heated, pay special attention when
handling it. If hot, allow the fuser to cool prior to touching.
3
Rotate the knob indicated with a blue arrow toward
the inside and remove any misfed paper.
4
After clearing all paper, return the two blue levers.
Close the exit cover and the right side cover. Return
the duplex unit to its normal position (if installed).
Downloaded From ManualsPrinter.com Manuals
7-20WHEN THE GRAPHIC SYMBOL FLASHES
4
Press the two blue levers. To release anypaper in
the fuser unit.
5. CLEARING PAPER JAM (Cont.)
5
After clearing paper, return the two blue levers. Close
the fuser cover and tighten the two blue screws.
Close the exit cover and the right cover. Return the
automatic duplexing unit to normal position (if
installed).
Downloaded From ManualsPrinter.com Manuals
7-22WHEN THE GRAPHIC SYMBOL FLASHES
5. CLEARING PAPER JAM (Cont.)
2
Remove any misfed paper inside the relay unit.
Paper Misfeed in the Relay Unit
(option for e-STUDIO20/25)
If paper is misfed at the inner part of the relay unit, remove
it pushing down the blue lever.
Remove the misfed paper from the fuser unit side if it is
easier.
1
Holding the cover handle of the relay unit, open it.
Downloaded From ManualsPrinter.com Manuals
7-24WHEN THE GRAPHIC SYMBOL FLASHES
6. ADDING STAPLES
Finisher (option for e-STUDIO20/25)
1
By pulling the lever, move the finisher away care-
fully from the copier.
4
Remove the empty staple case upward from the
staple cartridge.
5
Push in a new staple case into the staple cartridge
completely inside until a click is heard.
Do not remove the seal holding the staples before the staple
case is set in the cartridge.
2
Holding the sides of the staple cartridge, slide it out.
3
Turn the staple cartridge upside down.
Downloaded From ManualsPrinter.com Manuals
7-26WHEN THE GRAPHIC SYMBOL FLASHES
6. ADDING STAPLES (Cont.)
Be sure to turn off the copier before replacing the staples.
1
Slide forward and lift up the staple cover.
2
Pull out the staple cartridge.
3
Press the cartridge knob to remove the empty staple
case.
4
Insert a new staple case into the cartridge.
Do not peel off the sticker from the staple case before
inserting the staple case into the car tridge.
Staple kit (option)
Downloaded From ManualsPrinter.com Manuals
7-28WHEN THE GRAPHIC SYMBOL FLASHES
7. REMOVING JAMMED STAPLES
Finisher (option for e-STUDIO20/25)
1
Perform steps 1 and 2 of the procedure for “6.
ADDING STAPLES Finisher ”
( Page 7-22).
3
Remove any jammed staples using your fingertip or
something sharp.
4
Holding the knob, return part to its original
position.
A
A
2
Holding the knob, lower part .
5
Return the staple cartridge to its original position.
Insert the cartridge until it is caught by the claw and fixed
with a click sound.
6
Attach the finisher to the copier.
Downloaded From ManualsPrinter.com Manuals
7-30WHEN THE GRAPHIC SYMBOL FLASHES
5
Close the staple cover.
6
Restore power to the copier.
Confirm proper operation of the stapler.
7. REMOVING JAMMED STAPLES (Cont.)
Downloaded From ManualsPrinter.com Manuals
7-32WHEN THE GRAPHIC SYMBOL FLASHES
9. PERIODIC MAINTENANCE
Note
When the either of the following messages appears on the message display:
Time for maintenance
Maintenance/Drum
This indicates that assistance from a qualified service technician is required. Call for service.or
Downloaded From ManualsPrinter.com Manuals
9-2MAINTENANCE
1. DAILY INSPECTION
Items to inspect every morning
Power switch ON/OFF status
We recommend turning the power switch ON at startup every
morning so that copies can be made whenever you want. Also,
make sure that you turn the power switch OFF when you leave
the office.
Items to inspect once a week
Cleaning the Original Cover
Clean the original cover or the back of the automatic document
feeder (optional) or reversing automatic document feeder
(optional) with alcohol or a well-squeezed soft cloth moistened
with a neutral detergent. Then dry with a soft cloth.
Cleaning the Automatic Document Feeder (optional) or
Reversing Automatic Document Feeder (optional)
Clean the automatic document feeder (optional) roller or
reversing automatic document feeder (optional) roller with
alcohol or a soft cloth moistened with a neutral detergent. Make
sure that the soft cloth is squeezed well. Then dry with a soft
cloth.
Note
Before cleaning the copier, be sure to turn OFF power switch.
Please be careful not to scratch the glass surface or back of
the cover, when cleaning it.
Cleaning the Original Glass
Clean the original glass scanning glass of the auto document
feeder and scale with a soft cloth moistened with cleaning
liquid. Then dry with a soft cloth.
Downloaded From ManualsPrinter.com Manuals
9-4MAINTENANCE
Cleaning the transfer charger wire
1
Making sure that the stack feed bypass and the
automatic duplexing unit (if installed) are opened,
open the side cover.
2
Clean the transfer charger wire using the attached
charger cleaning accessory.
3
Close the side cover, automatic duplexing unit and
stack feed bypass.
2. CLEANING THE WIRE (Cont.)
When any of the following is generated on the copy, clean the transfer charger wire.
White lines in the direction of paper feed.
Uneven tone or dim images.
BE SURE TO TURN OFF THE POWER before cleaning the transfer charger wire.
Downloaded From ManualsPrinter.com Manuals
9-6MAINTENANCE
3. SIMPLE TROUBLE SHOOTING (Cont.)
Copies are stained
Countermeasure
Close the cover firmly to shut out any external
light.
Clean the original glass with a cloth
moistened with cleaning liquid. Then wipe it
with a dry cloth.
Clean the original cover with a cloth
moistened with a neutral detergent.
Then wipe the detergent completely off with
a dry cloth.
Set the image density properly.
Reference page
_
9-2
9-2
3-12
Items to be checked
Is the original cover firmly
closed?
Is the original glass dirty?
Is the original cover dirty?
Is the image density set
properly?
Countermeasure
Replace the toner cartridge.
Set the image density properly.
Reference page
7-4
3-12
Items to be checked
Has the message “Toner
empty” appeared on the
screen?
Is the image density set
properly?
Countermeasure
Set the image density properly.Reference page
3-12Items to be checked
Is the image density set
properly?
Copy density is too low
Copy density is too high
Downloaded From ManualsPrinter.com Manuals
9-8MAINTENANCE
Downloaded From ManualsPrinter.com Manuals
10-2SPECIFICATIONS & OPTIONS
1. e-STUDIO16/20/25 SPECIFICATIONS
Model Name
Body Type
Copying System
Original Glass
Original Cover (Platen Cover)
Frame Structure
Photosensor Type
Original Scanning System
Resolution
Scanning Data Output System
Image Memory
Maximum Original Capacity
(with max. image memory
installed) *
Acceptable Originals
Acceptable Copy Paper Size
Warm-up Time
First Copy Time
Multiple Copying
Reproduction Ratio
Paper Supply
Copy Density Adjustment
Power Requirement/
Power Consumption
Dimensions (Main Body only)
Weight (Main Body only)
DP1600/2000/2500
Desktop type
Indirect electrophotographic method
Fixed (original referenced to top left, referenced to center when using
the Automatic Document Feeder or the Reversing Automatic Document
Feeder)
Option
Fixed frame method
OPC drum
CCD sensor (7450 pixels)
600 x 600 dpi
One Scan Multi-Copying
Sort memory : (Std.) 8 MB
(Max.) 136 MB
Single sided : 250 sheets
Double sided : 125 sheets
Sheets, books and three-dimensional objects
Automatic feeding : A3 to A5-R
Manual feeding : A3 to A5-R
60 sec. or less (e-STUDIO16), 70 sec. or less (e-STUDIO20/25)
7.9 sec. or less (e-STUDIO16), 6.0 sec. or less (e-STUDIO20/25)
Up to 999 copies (numeric key entry)
Preset ratio : 50, 71, 82, 141, 200%
Zoom : 50 to 200% (e-STUDIO16),
25 to 400% (e-STUDIO20/25)** (in 1% increments)
Cassette: 64 to 80 g/m
2 550 sheets
(Height of 60.5 mm or less when loaded)
Automatic plus manual selection from 7 steps
220-240 VAC, 50/60 Hz 1.4 KW or less
(e-STUDIO16), 1.7 KW or less
(e-STUDIO20/25)
110-127 VAC, 50/60 Hz 1.4 KW or less (for Saudi Arabia 100V version only)
530 mm (W) x 554 mm (D) x 600 mm (H)
Applox. 50 kg
Specifications and appearance are subject to change without notice.
* Requires optional memory and varies depending upon originals used and amount of memory installed.
** When the original is scaned in the automatic document feeder (optional) or reversing automatic
document feeder (optional), the reproduction ratio of 50% to 200% can be specified.
Downloaded From ManualsPrinter.com Manuals
10-4SPECIFICATIONS & OPTIONS
Automatic Duplexing Unit
Model Name
Acceptable Originals
Power Source
Dimensions
Weight
MD-0101
Maximum A3
Minimum A5-R
Paper weight 64 to 80 g/m2
Supplied from the copier
101 mm (W) x 488 mm (D) x 345 mm (H)
Approx. 4.3 kg
Paper Feed Unit
Model Name
Acceptable Paper Size
Acceptable Paper Weight
Cassette Capacity
Power Source
Dimensions
Weight
MY-1015
A3, A4, FOLIO, A4-R, B4, A5-R, LT, LT-R
64 to 80 g/m2
550 sheets (Height of 60.5 mm or less when loaded)
Supplied from the copier
530 mm (W) x 536 mm (D) x 112 mm (H)
Approx. 7.7 kg
Paper Feed Pedestal/Large-capacity Feeder (for e-STUDIO20/25 only)
Model Name
Type
Number of Cassettes
Acceptable Paper Size
Acceptable Paper Weight
Cassette Capacity
Power Source
Dimensions
Weight
KD-1009 (Paper Feed Pedestal)
Console Type
One
A3, A4, FOLIO, A4-R, B4, A5-R,
LT, LT- R
64 to 80 g/m2
550 sheets (Height of 60.5 mm or
less when loaded)
Supplied from the copier
Approx. 17 kg
2. SPECIFICATION OF OPTIONS (Cont.)
Specifications and appearance are subject to change without notice.
KD-1010 (Large-capacity feeder)
A4
2500 sheeets
Approx. 23 kg
530 mm (W) x 536 mm (D) x 305 mm (H)
Downloaded From ManualsPrinter.com Manuals
10-6SPECIFICATIONS & OPTIONS
Stack Feed Bypass
Model Name
Acceptable Paper
Loading Capacity
Power Source
Dimensions
Weight
MY-1016
Continuous feed: 64 to 80 g/m
2
Single sheet feed: 80 to 163 g/m2
100 sheets (Height of 16 mm or less when loaded)
Supplied from the copier
485.1 mm (W) x 119.6 mm (D) x 227.4 mm (H)
Approx. 2.6 kg
Stapler
Model Name
Type of Stapling
Number of Sheet Stapled
Staple Capacity
Power Source
Dimensions
Weight
KK-1600
Flat Clinch Method
Up to 50 sheets of 52 to 80 g/m
2 paper
Up to 48 sheets of 52 to 80 g/m
2 paper + 2 sheets of 200 g/m2 paper
Paper thickness: Max. 5.5 mm
5000 staples
Supplied from the copier
257 mm (W) x 423 mm (D) x 173 mm (H)
Approx. 3.4 kg
2. SPECIFICATION OF OPTIONS (Cont.)
Finisher (for e-STUDIO20/25 only)
MJ-1011
A3, A4, A4-R, A5-R, B4, B5, B5-R
60 to 80 g/m2
30 sheets (A4, A4-R, B5, LT, LT- R)
20 sheets (B4)
15 sheets (A3)
Rear
Supplied from the copier
431 mm (W) x 541 mm (D) x 413 mm (H)
Approx. 18.6 kg
*Specifications and appearance are subject to change without notice.
Model Name
Copy Size
Paper Thickness
Number of Copies Staple at a
Time (64 to 80 g/m
2)
Stapling Position
Power Source
Dimensions
Weight
Downloaded From ManualsPrinter.com Manuals
10-8SPECIFICATIONS & OPTIONS
4. COPY FUNCTION COMBINATION MATRIX
e-STUDIO16/20/25 Copy Function Combination Table
The reason why the combination is not available.*1When 2nd function is programmed, the 1st function is cleared.
*2When 2nd function is programmed, the magnification ratio is reset to 100%.
*3When 2nd function is programmed, the magnification ratio is reset to 100% and the
Paper-Auto function is selected automatically.
*4When 2nd function is programmed, the Lighten/Darken is reset to “Auto” mode.
*5It is impossible to change the magnification ratio manually.
*6When 2nd function is programmed, the Paper-Auto is reset and A4 or LT size paper is
selected automatically.
*7The annotation is added only on the leading edge of copy output in transportation direction.
Ye s
Ye s
No
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
No *1
No *1
No
No
No
No
No
No
No
Yes *F
Ye s
Ye s
Ye s
No *1
No
No
No
Ye s
No *5
Ye s
Ye s
No *1
No *1
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
No *5
No *5
Yes *A
Yes *A
Ye s
Ye s
Ye s
Ye s
No *1
Ye s
Ye s
Ye s
No
Ye s
No
Zoom (Manual) *BLight/Dark(Auto/Manu)
Dual Page
Edge Erase *C
Image Shift *D
APS
AMS
Text Mode
Photo Mode
Text/Photo
Sort
Sort-Offset
Offset
Magazine Sort2-in-1/4-in-1(Include Duplex)
Page Number
Page Number & Date
1->2
2->1
2->2Bypass(Undefined Size)
X-Y Zoom
Neg/Pos
Mirror
Alternation
Book -> 2
Staple
Mix Size
2nd FunctionOffsetSort-OffsetSortText/PhotoPhoto ModeText ModeAMSAPSImage Shift *DEdge Erase *CDual PageLighter/Dark(Auto Manu)
Zoom (Manual)
*B
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Yes *A
Yes *A
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
No *2
Ye s
Ye s
No
No *6
No *1 *2
Ye s
Ye s
Ye s
Ye s
Ye s
No
No
No
No *7
No *7
Ye s
No
No
No
No *2
No
No
Ye s
No
Ye s
No
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Yes *A
Yes *A
Ye s
Ye s
Ye s
Ye s
No
No
Ye s
Ye s
Ye s
Ye s
No
Ye s
Ye s
No
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
No
No
No
Ye s
Ye s
No *2
Ye s
No
Ye s
Ye s
No *1
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s*F
No *1
Ye s
Ye s
No
No
Ye s
Ye s
No *2
Ye s
No
Ye s
Ye s
No *1
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Yes *A
Yes *A
Ye s
Ye s
Ye s
Ye s*F
No *1
Ye s
Ye s
Ye s
No
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
No *1
No *1
Ye s
Ye s
Ye s
Ye s
Ye s
Yes *A
Yes *A
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
No *1
No *1
Ye s
Ye s
Ye s
Ye s
Ye s
Yes *A
Yes *A
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
No *1
No *1
Ye s
Ye s
Ye s
Ye s
Ye s
Yes *A
Yes *A
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
No *1
No *1
Yes *E
Yes *E
Yes *E
Yes *E
Yes *E
Yes *E
Yes *E
Yes *F
Ye s
No
No
No *1
Yes *E
No
Yes *E
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
No *1
No *1
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Yes *F
Ye s
No
No
No *1
Ye s
No
Ye s
1st Function
Downloaded From ManualsPrinter.com Manuals
10-10SPECIFICATIONS & OPTIONS
Downloaded From ManualsPrinter.com Manuals

Add page 144 to Favourites

image text

Enable zoom

							7-23
1
2
3
4
5
6
7
9
10
11
128
 Paper Misfeed in the Finisher
(option for e-STUDIO20/25)
2
Lifting the blue lever, pull out any misfed paper.
3
Remove any misfed paper in the paper exit area.
1
By pulling the lever, move the finisher carefully away
from the copier.
Downloaded From ManualsPrinter.com Manuals

Add page 145 to Favourites

image text

Enable zoom

Add page 146 to Favourites

image text

Enable zoom

							7-25
1
2
3
4
5
6
7
9
10
11
128
Note
If the following message remains displayed, repeat the above
procedure from steps 1 to 4.
Set staple cartridge
7
Turn the staple cartridge to its normal position and
push it back into the stapler.
Insert the cartridge until it is caught by the claw and fixed
with a click sound.
6
Pull out the seal holding the staples straight.
Downloaded From ManualsPrinter.com Manuals

Add page 147 to Favourites

image text

Enable zoom

Add page 148 to Favourites

image text

Enable zoom

							7-27
1
2
3
4
5
6
7
9
10
11
1285
Peel off the tape from the case.
6
Attach the cartridge to the stapler.
Insert the cartridge until it clicks.
7
Close the staple cover.
8
With copier power on, insert a sheet of paper into
the stapler several times to advance the staples into
position.  (5 to 10 times)
Downloaded From ManualsPrinter.com Manuals

Add page 149 to Favourites

image text

Enable zoom

Add page 150 to Favourites

image text

Enable zoom

							7-29
1
2
3
4
5
6
7
9
10
11
128
3
Remove the jammed staple using a tapered object.
4
Press down and replace the staple guide.
Use this procedure to remove jammed staples.
Be sure to 
turn off the copier before removing the jammed staples.
1
Slide forward and lift up the staple cover.
2
Press the lever (1) and pull up the staple guide knob
(2).
(
2)
(
1)
Staple kit (option)
Downloaded From ManualsPrinter.com Manuals

All Toshiba manuals Comments (0)

Related Manuals for Toshiba E Studio 200S User Manual

Toshiba Tec Bev4g Manual
57 pages | Toshiba Printer
Toshiba Bev4g Manual
3 pages | Toshiba Printer
Toshiba Bex4t2g Manual
136 pages | Toshiba Printer
Toshiba B Sa4t G Manual
151 pages | Toshiba Printer
Toshiba B Ex4 User Guide
124 pages | Toshiba Printer
Toshiba Estudio 170f Manual
248 pages | Toshiba Printer
Toshiba Estudio 230 Manual
708 pages | Toshiba Printer
Toshiba B852 User Manual
112 pages | Toshiba Printer