Toshiba B Sa4t G Manual

 
- 68 -  
              
< 2 > P A R A M E T E R    S E T
 
S P E E D          9 6 0 0 b p s
 
             (11)  RS232C communication speed setting: 
  Select a communication speed using the 
[FEED] and [RESTART] 
        [PAUSE] 
 
(12)  Press the [PAUSE] key. 
< 2 > P A R A M E T E R    S E T
 
D A T A    L E N G .    8 b i t s
 
             (13)  RS232C data length setting: 
  Select a data length using the [FEED] and 
[RESTART] keys. 
        [PAUSE] 
 
(14)  Press the [PAUSE] key. 
< 2 > P A R A...

 
- 69 -  
              
< 2 > P A R A M E T E R    S E T
 
F E E D    K E Y         F E E D
 
             (29)  [FEED] key function setting: 
  Select a function of the [FEED] key using the 
[FEED] and [RESTART] keys. 
        [PAUSE] 
 
(30)  Press the [PAUSE] key. 
< 2 > P A R A M E T E R    S E T
 
K A N J I    C O D E    T Y P E 1
 
             (31)  Kanji code setting:   
Select a Kanji code using the [FEED] and 
[RESTART] keys. 
        [PAUSE] 
 
(32)  Press the [PAUSE] key. 
< 2 > P A R A M E...

 
- 70 -  
              
< 2 > P A R A M E T E R    S E T
 
P L U G  &  P L A Y    O F F
 
             (47)  Plug-and-play operation setting: 
  Enable/disable the plug-and-play operation 
function using the [FEED] and [RESTART] 
keys. 
 
        [PAUSE] 
 
(48)  Press the [PAUSE] key. 
< 2 > P A R A M E T E R    S E T
 
L B L / R B N    E N D    T Y P 1
 
             (49)  Label end/ribbon error process setting: 
  Select a label end or ribbon error process 
using the [FEED] and [RESTART] keys....

 
- 71 - < 2 > P A R A M E T E R    S E T
M U L T I    L A B E L      O F F(65)  Multiple-label set issue: 
Enable/disable the function using the [FEED] 
and [RESTART] keys. 
              
        [PAUSE] 
 
(66)  Press the [PAUSE] key. 
< 2 > P A R A M E T E R    S E T
P A S S W O R D   O F F - - - -(67)  System mode password operation setting: 
Set the system mode password operation 
using the [FEED] or [RESTART] key. 
              
        [PAUSE] 
 
(68)  Press the [PAUSE] key. 
< 2 > P A R A M E T...

 
- 72 -
FEED 
RESTART  6.3.2  Details of Various Parameter Setting   
(1)  Character code (FONT CODE) 
 
 • PC-8 
 • PC-857 
 • PC-852 
 • PC-850 
 • Arabic 
 • LATIN9 
 • PC-1257 
 • PC-1254 
 • PC-1253 
 • PC-1252 
 • PC-1251 
 • PC-1250 
 • PC-855 
 • PC-851 
 • PC-866 
 • UTF-8 
 
 
(2)  Font “0” (ZERO FONT) 
 
  •  0 (Without slash) 
  •  0 (With slash) 
 
 
 
 
 
 
(3)  RS-232C communication speed (SPEED) 
 
 • 115200 bps 
 • 38400 bps 
 • 19200 bps 
 • 9600 bps 
 • 4800 bps 
 • 2400 bps 
 
 
FEED...

 
- 73 - (4)  RS-232C data length (DATA LENG.) 
 
 • 8 bits 
 • 7 bits 
 
 
 
(5)  RS-232C stop bit length (STOP BIT) 
 
 • 2 bits 
 • 1 bit 
 
 
 
(6)  RS-232C parity (PARITY) 
 
 • EVEN 
 • ODD 
 • NONE 
 
 
(7)  RS-232C flow control method (XON/XOFF, READY/BUSY) 
  •  XON/XOFF AUTO  :  XON/XOFF protocol 
        (XON output when the power is on, XOFF 
output when the power is off) 
  •  XON + READY AUTO  :  XON/XOFF + READY/BUSY (DTR) protocol 
        (XON output when the power is on, XOFF 
output...

 
- 74 - (8)  Language for LCD messages (LCD) 
 
 • ENGLISH 
 • ITALIAN 
 • JAPANESE 
 • SPANISH 
 • DUTCH 
 • FRENCH 
 • GERMAN 
 
 
(9)  Forward feed standby after an issue (FORWARD WAIT) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
FEED 
RESTART 
[FEED]  [RESTART] 
FORWARD WAIT OFF
FORWARD  WAIT  ON
POSITION  +0.0mm
POSITION  +0.1mm
POSITION  +5.0mm
POSITION  -5.0mm
[PAUSE] 
[FEED] [RESTART]
[FEED] [RESTART]
[FEED] [RESTART][FEED]
[RESTART]
POSITION  -4.9mm [FEED] [RESTART]
POSITION  -0.1mm [FEED] [RESTART]
•...

 
- 75 - (10)  Control code (CODE) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(11)  Strip wait status (PEEL OFF STS) 
 
 • OFF: Disabled  
 • ON: Enabled 
 
 
(12)  [FEED] key function (FEED KEY) 
 
  •  FEED:  Feeds one label. 
  •  PRINT:  Prints data in the image buffer on one label. 
 
 
FEED 
RESTART [FEED]  [RESTART] 
CODE        AUTO 
CODE  ESC,LF,NUL
CODE       {  |  } 
CONTROL CODE1 1B
CODE      MANUAL 
CONTROL CODE2 0A[PAUSE] 
PEEL OFF STS OFF
CONTROL CODE3 00
[FEED]  [RESTART] 
[FEED]  [RESTART]...

 
- 76 - (13)  Kanji code (KANJI CODE) 
 
 
 
  
 
(14)  Euro code (EURO CODE) 
 
 
 
 
 
(15)  Automatic head broken dots check (AUTO HD CHK) 
 
  •  OFF:  A head broken dots check is not automatically performed when 
the power is turned on. 
  •  ON:  A head broken dots check is automatically performed when the 
power is turned on. 
 
 
(16)  Centronics ACK/BUSY timing (ACK/BUSY) 
 
  •  TYPE 1    BUSY goes low at the same time as when ACK goes high. 
  •  TYPE 2    BUSY goes high at the same time as...

 
- 77 - (18)  Reset process when the nInit signal is ON (INPUT PRIME) 
 
  •  OFF:  The reset process is not performed. 
  •  ON:  The reset process is performed. 
 
 
 
(19)  Ribbon near end detection (RBN NEAR END) 
  •  70 m:  A ribbon near end state is detected when the remaining ribbon 
length is approximately 70 m. 
  •  30 m:  A ribbon near end state is detected when the remaining ribbon 
length is approximately 30 m. 
  •  OFF:  A ribbon near end state is not detected. 
  NOTE: There are some...