Tone Commander T6220t-Tsg User Manual

28Tone Commander 6220T-TSG User Manual
Feature Activator Keys
Feature Activator keys must be configured to match network feature
activator codes that have been assigned to your line.
Using the dial pad, enter the feature activator code assigned
by your network service provider.
If you need to make corrections while entering numbers,
select 
ÅBKSP (backspace) to delete the previous digit.
Press the Done key twice to return to the key selection menu
or the Setup key to exit Setup Mode.
Done
10=NETWORK...

Tone Commander 6220T-TSG User Manual29
DSS Keys
DSS keys are a special type of Call Appearance/Directory Number
keys that are programmed with speed dial numbers to provide Direct
Station Selection. When the call appearance is idle or busy, DSS keys
act like Speed Dial keys, to call a station. When ringing, DSS keys act
like CA/DN keys, to answer a call. The LED indicator on the key shows
the status of the station’s call appearance (idle, ringing, hold, busy).
Shared call appearances for stations you wish...

30Tone Commander 6220T-TSG User Manual
Speed Dial Keys
Keys not assigned for call appearances or feature activators may be
used as Speed Dial keys. Dial strings can include network feature
activator codes, to simplify the use of features such as Directed Call
Pickup and Call Forwarding. Speed Dial keys may also be programmed
from the User Options menu.
The currently programmed dial string, if any, will be shown in
the display.
Enter digits (24 maximum) with the dial pad.
Pauses are entered with the PAUSE...

Tone Commander 6220T-TSG User Manual31
If you need to make corrections while entering numbers,
select 
ÅBKSP (backspace) to delete the previous digit.
CLEAR removes all digits, allowing you to start over. A Speed
Dial key will revert to Unused if saved with a cleared dial
string.
When digits have been entered, press the Done key twice to
return to the key selection menu or the Setup key to exit
Setup Mode.
Terminal Mode   __________________________
(National ISDN only)
If the network does not support...

32Tone Commander 6220T-TSG User Manual
Installation Password   ____________________
You can set a password to prohibit unauthorized entry into the
Installation Options menu.
If a password is currently set, the display will prompt you to enter your
password prior to making changes.
From the Installation Options menu, select PASSWD.
(Setup → INSTL → More
4 → PASSWD)
Select SET.
Enter a new 4-digit password with the dial pad.
If you need to change a password digit after entering it, select
ÅBKSP (backspace)...

Tone Commander 6220T-TSG User Manual33
Removing the Password
Select CLEAR.
“PASSWORD CLEARED” will be displayed to confirm that the
password has been removed.
Press the Done key to return to Installation Options menu or
the Setup key to exit Setup Mode.
What to do if you lose your password
Ask your system administrator to call Tone Commander technical
support at (800) 524-0024 in the event you misplace your password.
You will need to report the serial number of your telephone to receive a
new password....

34Tone Commander 6220T-TSG User Manual
Reset to Factory Default Settings   __________
Reset returns all settings to the factory defaults, and clears all speed
dial numbers, logs, and passwords. This option is useful when moving
the telephone to a new user or location.
Default values are listed in the table on page 65.
From the Installation Options menu, select RESET.
(Setup → INSTL → More
4 → RESET)
Select YES to confirm the reset operation.
Press the Done key to return to Installation Options menu or...

Tone Commander 6220T-TSG User Manual35
Administration Options
The following test and diagnostic options are available from the
Administration Options menu:
• Local Inspect• Test Functions
• Hardware Version• Diagnostics
• Software Version• Terminal Restart
• Serial Number• Error Log
Administration Options Menu   _____________
You can enter from the Administration Options menu when the phone
is idle or during an active call.
Press the Setup key.
Select ADMIN.
When Æ appears in the top line of the display,...

36Tone Commander 6220T-TSG User Manual
Local Inspect   ___________________________
Local Inspect allows you to identify the call appearance/directory
number or feature assignment of each configured key, directory
numbers, and the feature indicator assignment for the Message
Indicator. You can use Local Inspect after a Parameter Download to
verify call appearance and feature assignments.
 From the Administration Options menu, select INSPCT.
(Setup → ADMIN
 → INSPCT)
Select KEYS, DNs (Directory Numbers),...

Tone Commander 6220T-TSG User Manual37
Press the More
4 key to view:
• Originate usage
•  Call appearance reservation
DSS Key
The display will show for the selected key:
•  Key number, directory number
• DSS number
Press the More
4 key to view:
• Originate usage
•  Call appearance reservation
Feature Activator, Conference, Transfer, or Drop Key
The display will show the key number, network feature
activator number, and service description for the selected key.
ORIGINATING DN? YES    \...