Tone Commander T6220t-Tsg User Manual

18Tone Commander 6220T-TSG User Manual
Wall Mounting   __________________________
Robust handset retainer clips for wall mount use are available on
request from Tone Commander.
Rotating the Base
The phone base must be rotated for wall mounting.
•  Disconnect the line cord.
•  Remove the retaining screw in the center of the base.
•  Press the top of the tall edge of the base to disengage the snap
tabs, then lift the base from the telephone body.
Do not touch the expansion connector.
•  Turn the base 180°,...

Tone Commander 6220T-TSG User Manual19
Configure the Set   _______________________
ISDN configuration is performed automatically in many cases. The
telephone set will detect the switch type, set the SPID number, and
download other setup parameters when these features are available
from the central office.
You will be prompted for any required setup information that cannot be
set automatically.
Initialization
A self-test is performed upon power up. Press any key to begin
initialization with the network....

20Tone Commander 6220T-TSG User Manual
Parameter Download (National ISDN only)
Parameter Download is a network feature that Identifies Call
Appearance and Feature Activator keys that are assigned to your line
so that your phone may be configured automatically.
Note: Speed Dial and DSS keys are not configured by Parameter
Download, as well as other features listed on page 21
(Customize your Phone).
If Parameter Download is not supported, the following screen may
appear momentarily, prompting you to...

Tone Commander 6220T-TSG User Manual21
Customize your Phone   ___________________
You can set the following options on your phone.
DSS – converts Call Appearance keys to Direct Station Selection keys
with busy lamp indication for one-button speed dialing of stations that
are monitored by your phone (page 29).
Clock – sets the time-of-day clock. The clock is used for the time and
date display, and for time stamping calls in the call log (page 44).
Speed Dial – sets up spare keys for one-button speed...

22Tone Commander 6220T-TSG User Manual
Label the Set   ___________________________
Label the multifunction keys with the telephone number, feature name,
speed dial party name, or other appropriate designation. A perforated
label sheet is provided with the telephone.
An ISDN Telephone Setup Wizard for Windows can be downloaded
from Tone Commander’s web site. This program prints key labels and
service ordering forms. A Microsoft Word template for key labels only is
also available. Please refer to Appendix...

Tone Commander 6220T-TSG User Manual23
Installation Options
Options in this section are typically set at the time of installation. Many
options can be set automatically by the AutoSPID, Automatic Switch
Detect, and Parameter Download features, if supported on the network.
The following options can be changed from the Installation Options
menu:
• SPID• Key Configuration
• Parameter Download• Installation Password
• Terminal Mode•  Reset to Default Settings
Installation Options Menu   ________________
You...

24Tone Commander 6220T-TSG User Manual
A password may be set to prevent unauthorized entry
into the Installation Options menu.
When prompted for a password, enter your 4-digit
password with the dial pad. Press the Done key after
entering the password.
To change or remove the password, please refer to
page 32.
SPID Entry   _____________________________
A unique SPID (Service Profile IDentifier) is required for operation of
the 6220T-TSG. If the network supports AutoSPID, a SPID that is
assigned to your...

Tone Commander 6220T-TSG User Manual25
Parameter Download  _____________________
(National ISDN only)
ISDN Parameter Download is an automated feature for configuring Call
Appearance and Feature Activator keys. If configured for auto
download, a Parameter Download is executed when the phone
initializes with a new SPID, or when requested by the network, due to a
line configuration change.
Note: Speed Dial and DSS keys are not configured by Parameter
Download.
From the Installation Options menu, select...

26Tone Commander 6220T-TSG User Manual
From the Installation Options menu, select KEYS.
(Setup → INSTL → KEYS)
The status indicator for each key will indicate the current
setting.
Green– Call Appearance or DSS.
Red– Feature Activator.
Off– Unused or Speed Dial.
Press the multifunction key to be programmed.
The selected key’s indicator will alternately flash red and
green.
Select CA/DN (Call Appearance /Directory Number), FA
(Feature Activator), DSS (Direct Station Select), SPDIAL
(Speed Dial), or UNUSED...

Tone Commander 6220T-TSG User Manual27
Automatic Call Appearance Selection
A call appearance is automatically selected when originating a new
call, answering an incoming call, or conferencing or transferring a call.
Three configuration options determine how call appearances are
selected:
Call Preference (page 50) – determines whether a new call is
originated when you lift the handset. If set to NONE, you must
manually press a Call Appearance key to originate a call.
Originating DN – only call appearances...