Tone Commander T6220t-Tsg User Manual

8Tone Commander 6220T-TSG User Manual
Transferring Calls   _______________________
Use this feature to transfer an active call to another party.
Press the Tran key while in an active call.
The current call is placed on hold, and an idle call appearance
is automatically selected. The Tran indicator flashes (on some
network switch types, the Conf indicator may light instead of
the Tran indicator).
Dial the party you want to transfer the call to with the dial pad
or a Speed Dial key.
Wait until the called...

Tone Commander 6220T-TSG User Manual9
Conferencing a Held Call
Press the Conf key while you are on an active call with
another call on hold.
The current call is placed on hold and an idle call appearance
is automatically selected. The Conf indicator lights.
Press the Call Appearance key for the held call you wish to
add to the conference.
Press the Conf key to conference all parties together.
Repeat the above steps to add another party.
Dropping the Last Party
Press the Drop key to remove the last party...

10Tone Commander 6220T-TSG User Manual
Privacy
Prevents other users from bridging on your active call.
Group Call Pickup
Answers a call ringing at another telephone in your workgroup.
Directed Call Pickup
Answers a call ringing at a specified telephone.
Automatic Callback (Recall)
Calls you when a dialed busy station becomes idle, then redials the
station when you answer.
Message Waiting
Lights the Message Indicator on your telephone when you have a voice
mail message.
Using the Call Log...

Tone Commander 6220T-TSG User Manual11
Viewing the Call Log
Press the Call key.
Select LOG.
A password may be set to prevent unauthorized entry
into your call log. When prompted for a password,
enter your 4-digit password with the dial pad. Press
the Done key after entering the password.
To change or remove the password, please refer to
page 53.
Select the type of call you want to view – UNANS
(unanswered), ANSWD (answered), or OUT (outgoing).
A key indicator will alternately flash red and green to...

12Tone Commander 6220T-TSG User Manual
Shortcut to the Unanswered Call Log
If any calls ringing at your telephone were unanswered,
UNANS will appear in the display. You can select UNANS to
enter directly into the Unanswered call log. After you have
viewed the unanswered call log, the UNANS display indication
will clear until new calls are received.
Dialing a Call Log Entry
(Does not work when on-hook)
The DIAL option is displayed when viewing the call log while off-hook.
With the call you want to dial...

Tone Commander 6220T-TSG User Manual13
Using the Call Directory   __________________
What is the Call Directory?
The Call Directory is a softkey-based speed dialing system that can
store up to 36 entries. A name display identifies each entry. Use the
directory to store frequently-dialed numbers when additional Speed
Dial keys are not available.
Directory entries are displayed on nine screen pages, with four entries
per page. The current directory page number (1-9) will be shown at the
upper right of the...

14Tone Commander 6220T-TSG User Manual
Adjusting the Receive Volume   _____________
The Vol
5 and Vol
6 keys adjust the receive volume level for the
handset while you are on a call.
The telephone stores individual preset volume settings for the handset.
Volume settings return to the programmed preset levels after a call is
completed. See page 51 to change the preset values.
Adjusting the Ringer Volume   ______________
The Vol
5 and Vol
6 keys adjust the ringer volume while you are not
on a call.
The...

Tone Commander 6220T-TSG User Manual15
Installation
Ordering ISDN Service   ___________________
ISDN ordering forms may be supplied by your service provider. You
can also print forms using the PC-based Configuration Wizard. Please
refer to Appendix A in this manual.
Consult your service provider to plan your service installation. Allow
adequate time after cutover for testing of all call appearances and
programmed features. Ask your service provider for your SPID
numbers, and confirm the installation...

16Tone Commander 6220T-TSG User Manual
Basic Multipoint:
(recommended for most applications)
Short Multipoint:
Extended Point-to-Point:
Line and Power Connections
Power for the telephone may be provided on PS1 (phantom power on
the transmit and receive pairs from the NT1) or PS2 (power on pins 7
and 8). Tone Commander NT1U-220TC standalone NT1s and
NT1U-223TC rack-mount NT1 cards provide both PS1 and PS2 power
without additional connections.
NT1 6220T-TSG
Set phone termination to OFF.
 6220T-TSG
Set NT1...

Tone Commander 6220T-TSG User Manual17
WARNING: If a separate power supply is used to provide PS2
power to the telephone, make sure that the output ground of the
NT1 power supply and the PS2 power supply are connected
(with the correct polarity) to a common ground reference point or
electrical damage to the telephone may occur.
•  If your phone is equipped with jumpers next to the S/T IN jack, set
both jumpers to PS1 or PS2 as required.
•  Using an 8-conductor line cord, connect the S/T IN jack on the...