Tone Commander 7210, 7220 Ip Centrex Telephone User Manual

							46Tone Commander 7210/7220 User Manual
Administration Options
The following test and diagnostic options are available from the
Administration Options menu:
• Local Inspect• Test Functions
• Hardware Version• Diagnostics
• Software Version• Terminal Restart
• Serial Number• Error Log
• MAC Address
Administration Options Menu   _____________
You can enter from the Administration Options menu when the phone
is idle or during an active call.
Press the Setup key.
Select ADMIN.
When Æ appears in the top line of the display, you can press
the More
4 key to see additional menu selections.
Setup
       SETUP MENU
INSTL ADMIN  USER
ADMINISTRATION OPTIONS \
INSPCT VERS  TEST  DIAG
ADMINISTRATION OPTIONS \
RESTART LOG
More 
						

							Tone Commander 7210/7220 User Manual47
Local Inspect   ___________________________
Local Inspect allows you to identify the call appearance/directory
number or feature assignment of each configured key, directory
numbers, and the feature indicator assignment for the Message
Indicator. You can use Local Inspect after a Parameter Download to
verify call appearance and feature assignments.
 From the Administration Options menu, select INSPCT.
(Setup → ADMIN
 → INSPCT)
Select KEYS, DNs (Directory Numbers), or MESSAGE
(Message Indicator). Each option is described below.
Keys
Select KEYS.
Press the key that you want to inspect.
The key’s indicator will alternately flash red and green.
Displays will vary depending upon the key type, as shown
below.
When you are finished inspecting keys, press the Done key to
return to the Local Inspect menu or the Setup key to exit
Setup Mode.
Call Appearance/Directory Number Key
The display will show for the selected key:
•  Key number, directory number
     LOCAL INSPECT
 KEYS   DNs      MESSAGE
01=CA/DN# 555-349-1012 \
Done 
						

							48Tone Commander 7210/7220 User Manual
Press the More
4 key to view:
• Originate usage
•  Call appearance reservation
DSS Key
The display will show for the selected key:
•  Key number, directory number
• DSS number
Press the More
4 key to view:
• Originate usage
•  Call appearance reservation
Feature Activator, Conference, Transfer, or Drop Key
The display will show the key number, network feature
activator number, and service description for the selected key.
(CALL) is displayed if the feature has been locally
programmed to originate a call when activated (see page 35).
ORIGINATING DN? YES    \
RESERVED=OUT/PRIORITY IN
07=NETWORK FA#56  (CALL)
Call Pickup
05=DSS/DN# 555-789-4251\
4251
ORIGINATING DN? NO     \
RESERVED=NOT RESERVED
More
More 
						

							Tone Commander 7210/7220 User Manual49
Speed Dial Key
The display will show the key number and programmed
autodial string for the selected key.
Directory Numbers
Select DNs to view the list of directory numbers on this phone.
The first line on the display will show the directory number,
and ‘ORIG’ if this is an originating DN.
Press the More
4 key to view additional directory numbers.
Press the Done key to return to the Local Inspect menu or the
Setup key to exit Setup Mode.
Message Waiting Indicator
Select MESSAGE.
The Message indicator will light.
The display will show the feature indicator number and the
service description, if available. If the service description on
line 2 is blank after a Parameter Download, this feature has
not been provisioned on your line.
Press the Done key to return to the Local Inspect menu or the
Setup key to exit Setup Mode.
08=SPEED DIAL
5553452341
DN#555-345-8952   ORIG \
MESSAGE=NETWORK FI#63
Message Waiting
More
Done
Done 
						

							50Tone Commander 7210/7220 User Manual
Version   ________________________________
Use this option to view the telephone’s hardware version, software
version, and serial number.
From the Administration Options menu, select VERS.
(Setup → ADMIN
 → VERS)
Hardware Version
Select H/W.
Software Version
Select S/W.
Serial Number
Select SERIAL.
MODEL: 7220
TOP: -01A     PCB: -03A
APPL VERS:01.02.05
BOOT VERS:01.02.05
SERIAL#:00312102002
        VERSION        \
 H/W   S/W  SERIAL  MAC
        VERSION        \
6030X 
						

							Tone Commander 7210/7220 User Manual51
MAC Address
Select MAC.
Press the Done key to return to the Administration Options
menu or the Setup key to exit Setup Mode.
Optional Equipment Version
Select 6030X or other installed option (if displayed).
Press the Done key to return to the Administration Options
menu or the Setup key to exit Setup Mode.
Done
ETHERNET MAC ADDRESS:
00:04:8D:00:00:51
Done
MODEL:6030X BUTTON EXPAN
VERSION: 01.01.04 
						

							52Tone Commander 7210/7220 User Manual
Test   ___________________________________
Select this option to test the LCD display, LED indicators, and keys.
From the Administration Options menu, select TEST.
(Setup → ADMIN
 → TEST)
Display and LED Indicators
Select DISPLY.
LCD Display
Select LCD.
All pixels (picture elements, or dots) on the display should turn
dark.
Press any key to return the display to normal operation.
LED Indicators
Select RED to turn on all red indicators, and turn all others off.
Select GREEN to turn on all green indicators, and turn all
others off.
Select OFF to turn off all indicators.
Press the Done key to return to the Test menu or the Setup
key to exit Setup Mode.
     TERMINAL TEST
DISPLY KEYS 6030X
    DISPLAY/LED TEST
 LCD   RED   GREEN  OFF
{{{{{{{{{{{{{{{{{{{{{{{{
{{{{{{{{{{{{{{{{{{{{{{{{
Done 
						

							Tone Commander 7210/7220 User Manual53
Keys
Select KEYS.
Press each key on the telephone, including the dial pad keys,
one at a time.
A letter should appear in the display for each pressed key.
On 7210 models, 10 additional letters will appear after the first
keypress, representing the 10 “missing” multifunction keys.
If all keys are operational, the following display will be shown.
Press key to return to the Test menu.
If any key fails, or to exit before testing all keys, go off-hook
with the handset or unplug the phone.
6030X Expansion Module
This option tests the keys and LED indicators on a 6030X Expansion
Module. It is only available if an Expansion Module is connected to the
phone.
Select 6030X.
Press each key on the Expansion Module, one at a time.
The keys LED indicator should flash alternately red and
green, and a number should appear in the display for each
pressed key.
 PRESS EACH KEY TO TEST
 OR GO OFF-HOOK TO EXIT
ABCDEFGHIJKLMNOPQRSTUVWX
abcdefghijklmnopqrstuvwx
    KEY TEST PASSED
 PRESS ANY KEY TO EXIT
PRESS EACH KEY ON 6030X
   PRESS DONE TO EXIT 
						

							54Tone Commander 7210/7220 User Manual
After all keys have been tested, press any key to exit the test.
You can also exit the test at any time by pressing the Done
key to return to the Test menu or the Setup key to exit Setup
Mode.
Diagnostic Display   ______________________
From the Administration Options menu, select.
(Setup → ADMIN
 → DIAG)
Select LINK to view the status of the connection to iMerge.
The display will show the Ethernet physical layer data rate, IP
layer status, ISDN Layer 3 state, and the ISDN network switch
type.
Select PACKET to view packet reception statistics for an
active call or the last call by call appearance. Refer to the
7210/7220 Network Administration Guide for a detailed
description of packet statistics.
Press the More
4 key to view
 additional packet types.
123456789012345678901234
567890
Done
DIAGNOSTIC OPTIONS
 LINK PACKET PING
PHY:100MBPS IP:LINKED
L3:OK   SWITCH=5E CUSTOM
CONCEALED=27        
						

							Tone Commander 7210/7220 User Manual55
Select PING to initiate a ping message to a selected IP
address.
Select a device to ping.
The delay time is shown. Select PING to initiate additional
ping messages.
Press the Done key to return to the Administration Options
menu or the Setup key to exit Setup Mode.
Restart   ________________________________
Select Restart to reset the phone. If you are on an active call you will
be disconnected. The call log will be cleared. No configuration
parameters will be altered.
From the Administration Options menu, select RESTART.
(Setup → ADMIN
 → More
4 → RESTART)
Select YES to restart the phone.
 RESTART/CLEAR CALL LOG?
 YES    NO
Done
SELECT DEVICE TO PING  \
PHONE GATEWY TFTP iMERGE
SELECT DEVICE TO PING  \
 SNTP  DHCP OTHER
iMERGE PING DELAY=20ms
                   PING