Tone Commander 7210, 7220 Ip Centrex Telephone User Manual

7210 /  7 2 2 0
IP Centrex Telephone
User Manual 

Tone Commander 7210/7220 User Manuali
Contents
Introduction .......................................................................................... 1
General Features ............................................................................... 1
Controls and Indicators ...................................................................... 2
Operation .............................................................................................. 4
Placing a Call...

iiTone Commander 7210/7220 User Manual
Installation Options ........................................................................... 24
Installation Options Menu................................................................. 24
IP Addresses .................................................................................... 25
Alias Entry ........................................................................................ 27
SPID...

Tone Commander 7210/7220 User Manualiii
Troubleshooting................................................................................. 70
No Network Connection ................................................................... 70
DHCP Error ...................................................................................... 70
Network Error ................................................................................... 70
IP Lease Expiration...

ivTone Commander 7210/7220 User Manual 

Tone Commander 7210/7220 User Manual1
Introduction
General Features   ________________________
Tone Commander 7210 and 7220 IP Centrex VoIP (Voice over Internet
Protocol) Telephones are easy to use multiline terminals that provide
sophisticated ISDN services over managed IP networks. The
telephones support Centrex ISDN services provided through a
Lucent/AG Communication Systems iMerge Centrex Feature Gateway.
They include a built-in 10/100BaseT repeater to allow daisy-chain
connection of a PC workstation...

2Tone Commander 7210/7220 User Manual
Controls and Indicators   __________________
1) Display – shows the call state, caller ID, dialed digits, network call
control messages, and elapsed time during calls. When not on a
call, the date, time of day, and softkey options are displayed.
The viewing angle can be adjusted by tilting the display, then
changing the contrast setting – see page 67.
2) Softkeys (4) – select the function displayed above the key on the
second line of the display.
3) Call Key –...

Tone Commander 7210/7220 User Manual3
7) Message Indicator – a bright red indicator is lit when messages
are waiting; controlled by the network.
8) Multifunction Keys – select call appearances, activate network
features, or dial personal speed dial numbers. Red and green
indicators on the keys show call appearance and feature status.
Call Appearance StateIndication
IdleOFF
Call RingingGreen – flashing
In Use by YouGreen – on steady
On Hold by YouGreen – winking
In Use at Another TerminalRed – on steady...

4Tone Commander 7210/7220 User Manual
Operation
Placing a Call   ___________________________
Selecting a Call Appearance
If the Call Preference option (page 64) is set to Idle or Ringing, your
telephone will automatically select an idle call appearance when you go
off-hook, or activate the speakerphone when you press a Speed Dial,
DSS, REDIAL, dial pad, or UNANS-DIAL key while on-hook.
Automatic Call Appearance Selection
Lift the handset, press the Spkr key, or press a dial pad key to
select an idle call...

Tone Commander 7210/7220 User Manual5
Last Number Redial
The Redial feature dials the last number that was dialed with the dial
pad or a Speed Dial key. Digits dialed after a call is connected are not
saved.
Select REDIAL to redial the last number.
Using the Call Log – refer to page 10.
Using the Call Directory – refer to page 13.
Using Speed Dial Keys
Speed Dial keys automatically dial a series of up to 24 digits when
pressed. If your telephone is on-hook, an idle call appearance will be
selected before...