Telrad Digital Digital Family Of Systems Operating Instructions

Section 5: PHONE BOOK FEATURE OPERATING INSTRUCTIONS
3
5-3
7. Press [HOLD] to save and continue programming, or skip to next 
step.
-  The previous display returns so that you may make the next 
entry, in the next available speed dial bin.
8. Press 
{SAVE&EXIT} or [PROGRAM] when you have finished pro-
gramming all the entries for the list.
To delete an entry from your private Phone Book
1. Access Phone Book as if you are about to dial a number (steps 1-4 
in “Phone Book dialing instructions” above) until...

76-110-0165/G, Issue 1
4
5-4
If you want to enter two characters from the same button on the dial-
pad, for example D followed by E, wait two seconds between entering 
characters (until you see the cursor “_” at the next position), or press 
the [NEXT] (if programmed) to enter to the next character.
Enter “Z” by pressing [9] four times.
Enter “Q” by pressing [7] two times.
Enter an underline by pressing [1] twice.
Enter a dash by pressing [1] four times.
Warning signal
You will hear a three-beep warning...

1
6-1
Section 6
REMOTE FEATURES
6.1 GENERAL
The only Remote feature whose operation is slightly different for the 
Avanti sets is the Executive Credit Code (ECC). For all other Remote 
features, consult the Release 6 Operating Instructions, Section 6.
6.2 EXECUTIVE CREDIT CODE (ECC)
The Executive Credit Code (ECC) is a four-digit secret password which 
is programmed from your extension and then used:
• To enable access to various system features via DISA (see  Section 
6.3
, of the Release 6 Operating...

76-110-0165/G, Issue 1
2
6-2
4. Dial a new four-digit code.
-  Display shows the digits entered.
5. Press 
 icon.
All other sets To program your ECC code for the first time
1. Press [FEAT] [3][9] 
(FEAT [E][X]).
- Display sets show NEW ECC
2. Dial the desired four-digit code.
- Display sets show the digits entered.
3. Hang up.
To change your ECC
1. Press [FEAT] [3][9]. 
(FEAT [E][X]).
- Display sets show OLD ECC
2. Dial your old four-digit code.
- If you entered the old ECC incorrectly, retry tone is...

1
A-1
Appendix  A  
STORED AND DND MESSAGES
A.1 STORED AND DND MESSAGE TABLES
Table A-1 contains the list of Stored Messages, and Ta b l e  A - 2 contains the list of
DND Messages.
(1) Indicates messages for which the user can enter appropriate digits from the dialpad (one digit
per asterisk shown),
Table A-1 Stored messages
Message No. Default message
Updated message
01 CALL __(Basic message)
02 CALL * * * * * (1)
03 CALL HOME
04 CALL ME
05 GONE OUT
06 READ MAIL
07 VOICE MAIL
08 CALL BOSS
09 TAKE MSGS...

76-110-0165/G, Issue 1
2
A-2
(1) indicates messages for which the user can enter appropriate digits from the dialpad (one digit per
asterisk shown).
Table A-2  DND messages
Message No. Default message Updated message
01 BE BACK SOON
02 BE BACK AT * * : * * 
(1)
03 BE BACK ON * * - * * (1)
04 OUT UNTIL * * : * * (1)
05 OUT FOR THE DAY
06 OUT OF OFFICE
07 OUT OF TOWN
08 OUT ON A CALL
09 OUT FOR LUNCH
10 ON VACATION
11 ON A TRIP
12 ON BREAK
13 AWAY FROM DESK
14 GONE HOME
15 BUSY UNTIL * * : * * 
(1)
16 CALL...