Technics Keyboard Sx Kn7000 Owners Manual

One Touch Play
ONE TOUCH PLAY automatically sets a suggested combination of sounds and an appropriate tempo
for your chosen rhythm style.
1.Select a rhythm pattern.
•Do not select the MEMORY button.
2.Press and hold the ONE TOUCH PLAY button
for a few seconds.
•During setting, the style name is shown on the
display.
•The AUTO PLAY CHORD and the SYNCHRO
& BREAK are automatically turned on, and
the sounds and effects, volume balances,
tempo etc. that are ideal for your selected
rhythm are automatically...

•The AUTO PLAY CHORD and the SYNCHRO
& BREAK turn on, and the sounds, effects,
volume balances, rhythm and tempo etc.
which are best suited for the selected music
style are automatically selected.
5.Play the keyboard.
•When you specify a chord, the automatic
rhythm begins to play immediately.
Setup by era
You can select a style from a specific music era.
1.Press the MUSIC STYLIST button to turn it
on.
2.Select MUSICAL ERA.
•The display looks similar to the following.
3.Use the STYLE 
 and  buttons to...

Setup by organ style
You can select a style from those suitable to play
using the organ sounds.
1.Press the MUSIC STYLIST button to turn it
on.
2.Select ORGAN STYLIST.
•The display looks similar to the following.
3.Use the STYLE 
 and  buttons to select a
style.
•You can use the SKIP 
∧ and ∨ buttons to skip
to the previous or following alphabetical or
numerical heading.
•You can use the MORE button to view the next
page of styles.
•The AUTO PLAY CHORD and the SYNCHRO
& BREAK turn on, and the sounds,...

Music Style Arranger
The MUSIC STYLE ARRANGER helps you to make professional registration changes during your
performance. Select between four contrasting registrations at the push of a button, or let your instrument
change the registration automatically for you when you use FILL IN 1 or 2. The MUSIC STYLE
ARRANGER will also alter the accompaniment in character with the registration change creating a
polished sounding arrangement.
How to use the MUSIC STYLE AR-
RANGER
1.Select a rhythm pattern.
2.Press...

PANEL MEMORY:
The PANEL MEMORY number (BANK A: 1 to
4) changes. You can store your desired panel
settings in the PANEL MEMORY beforehand
and switch from one to another quickly.
•After a few seconds, the display exits the set-
ting mode.•You can also access this setting display from
the CONTROL MENU display. (Refer to page
178.)
Panel Memory
PANEL MEMORY stores all the current panel settings so you can recall them at the push of a button.
How to store the panel settings
By storing all the panel settings...

Assign a name to the bank/memory
You can assign names to the banks and memo-
ries.
1.Select a bank or memory.
2.Use the PAGE buttons to go to the PAGE 3/3
page on the display.
3.Press the BANK NAMING button to assign a
name to the bank, or the MEMORY NAMING
button for the memory.
•The display looks similar to the following.
4.Use the buttons below the display to assign a
name.
•Press the ABC button to enter alphabetical
characters. While the SHIFT button is
pressed, upper case letters are entered.
•Press...

PANEL MEMORY mode
You can define which panel settings are recalled
when the PANEL MEMORY is used.
1.Press and hold the SET button for a few sec-
onds.
•The display changes to the following.
2.Select the mode.
NORMAL:
The sounds and volume balance, and CON-
DUCTOR status are stored.
EXPAND:
All the instrument’s settings are stored, includ-
ing the rhythm (except for SOUND AR-
RANGER on/off status), TRANSPOSE,
tempo, etc.
•After a few seconds, the display exits the set-
ting mode.
EXPAND MODE FILTER
You...

Playing phrases
During your performance, you can insert a short recorded phrase or effect sounds by pressing a pad
button. A different group of phrases is recorded in each bank.
1.Press the BANK button.
2.Select the desired bank from the display.
•The list of banks consists of three screen
pages. Use the PAGE buttons to change the
page.
•“User Bank” A, B and C are for storing your
original phrases.
•“Compile Bank” 1 and 2 are for assigning
phrases as you desire.
•Various functions are assigned to each...

Copying phrases
You can copy the desired data, as phrases, from the SEQUENCER to each pad memory of a “User
Bank”.
•Chord data also can be copied to pad buttons 5 and 6 (SOLO).
PHRASE COPY
Copy a phrase from one pad to another.
1.Press the PROGRAM MENUS button to turn
it on.
•The display looks similar to the following.
2.Select PERFORMANCE PADS.
•The display looks similar to the following.
3.Select PHRASE COPY.
•The display looks similar to the following.
4.Select the pad you wish to copy from.
•Use the...

SEQ TO PAD COPY
1.Record a phrase in the SEQUENCER, or load
data from a disk.
•After this procedure, please do not change the
song number.
•For details about SEQUENCER operation,
refer to page 74.
•For information about loading data, refer to
pages 125, 140.
2.Press the PROGRAM MENUS button to turn
it on.
3.Select PERFORMANCE PADS.
4.Select SEQ TO PAD COPY.
•The display looks similar to the following.
5.Select the measures of SEQUENCER data
you wish to copy from.
•On the SEQUENCER side, use the buttons...