Technics Keyboard Sx Kn7000 Owners Manual

7
Use your left hand to play the chords
and your right hand to play the melody.
•Pressing a key on the left area of
the keyboard will cause the
automatic rhythm pattern to start
playing (synchro start).
8
At the end of your performance, press
the INTRO & ENDING 1 or 2 button.
•An ending pattern is played, after
which the automatic accompaniment
stops.
•If the START/STOP button is
pressed, the accompaniment stops
immediately.
•In this example you played chords by
pressing the keys for the “root notes”...

Store your panel settings
(PANEL MEMORY)
1
Set up the desired panel settings
(sounds, volumes, etc.)
2
Use the NEXT BANK button to select
a bank (A, B, C, 1 to 10).
•The bank numbers are shown on
the display.
3
With the SET button held down, press
one of the numbered buttons of the
PANEL MEMORY (1 to 8).
•The current panel settings are now
stored in the specified bank and
number. When you select the same
bank and number again, the stored
panel settings are recalled.
•If you do not wish to recall the...

Recall your favorite panel 
settings at the press of a single
button 
(CUSTOM PANEL)
1
Set up the desired panel settings
(sounds, volumes, etc.)
2
Press the SET button and the CUSTOM PANEL button
at the same time.
•“COMPLETED!” is shown on the display and the
settings are stored. You can recall the stored settings
at any time by turning on the CUSTOM PANEL
button.
•The PANEL MEMORY data is overwritten
when disk load or automatic settings are
performed, so if there is one particular
combination of...

Record your performance
(SEQUENCER)
1
In the SEQUENCER section, press the
EASY REC button to turn it on.
2
Press the OK button.
•The display changes to the
REALTIME RECORD display.
SEQUENCER
SD
CUSTOMIZE
FAVORITES CUSTOM
PANELPLAY EASY REC
DISK
LOAD
DISK
IN USE
+ –
+ –LOADPROGRAM
MENUS
SOUND
DSPVARIATION
REVERB DIGITAL
EFFECT
MULTI SUSTAIN SOUND
EXPLORER
EW
EXPANSION DIGITAL
DRAWBARORGAN
TABSACCORDION
REGISTERORGAN &
ACCORDION SAX &
WOODWIND STRINGS
& VOCAL MALLET &
ORCH PERCBRASS WORLD GUITAR PIANO...

3
Play the song on the keyboard.
4
When you have finished playing, press
the EASY REC button again to turn it
off.
•The PLAY button in the
SEQUENCER section turns on.
Playing back your recorded
performance
A
Press the SEQUENCER RESET (FILL
IN 1) button.
B
Press the START/STOP button.
•Your performance is played back
just as you recorded it.
•When you are finished playing back
your performance, press the PLAY
button in the SEQUENCER section
to turn it off.
SEQUENCER
SD
CUSTOMIZE
FAVORITES CUSTOM
PANELPLAY...

Save data on an SD card
1
Insert an SD card you wish to save to
into the SD slot.
•Close the cover securely.
2
Press the SD button.
3
On the SD MENU display, select
SAVE.
4
Select TECHNICS FORMAT.
5
Specify the FOLDER and a SONG
number to save to.
6
Press the SAVE button.
•The performance data of the song
recorded in the SEQUENCER is
saved on the SD card.
SEQUENCER
SD
CUSTOMIZE
FAVORITES CUSTOM
PANELPLAY EASY REC
DISK
LOAD
DISK
IN USE
+ –
+ –LOADPROGRAM
MENUS
SOUND
DSPVARIATION
REVERB DIGITAL
EFFECT...

Recall data from an SD card
1
Press and hold the SD button for a
few seconds.
2
Select the FOLDER and the SONG
you wish to load.
3
Press the LOAD button.
•The data is copied to the internal
memory of this instrument.
4
Press the PLAY button in the
SEQUENCER section to turn it on.
5
Press the START/STOP button.
•The recalled song is played back.
The following data can be saved/loaded:
SEQUENCER
SD
CUSTOMIZE
FAVORITES CUSTOM
PANELPLAY EASY REC
DISK
LOAD
DISK
IN USE
+ –
+ –LOADPROGRAM
MENUS
SOUND...

Load rhythm data from a Technics
pattern disk 
(COMPOSER LOAD)
1
Insert a commercially sold Technics
pattern disk into the Disk Drive slot.
2
In the RHYTHM GROUP section,
press and hold the LOAD (MEMORY)
button for a few seconds.
3
Select the name of the pattern to load.
4
Press the LOAD button.
•Rhythm data is loaded to the
COMPOSER memory (MEMORY).
You can use the rhythms during
your performance, just like the
preset rhythms.
SEQUENCER
SD
CUSTOMIZE
FAVORITES CUSTOM
PANELPLAY EASY REC
DISK
LOAD
DISK
IN...

About the display
A large-size display, easy to operate with excellent readability, is used for displaying various information
such as the names of the selected sounds and rhythms etc. and when setting the functions. Let’s take
a look.
•The display illustrations shown in this User’s Manual are examples for the sake of clarification; the
actual displays on your instrument may differ from the illustrations.
Normal display (HOME PAGE)
This is the kind of information you see on the
display during a normal...

OTHER PARTS/TR
If you press the OTHER PARTS/TR button, the
display changes to show the volumes of PART
(PT) 1–16. You can then adjust the volumes of
these parts. These parts are active when playing
back a song disk or when this instrument is con-
nected to external MIDI equipment and is used
as a multi-timbre sound generator.
•When there are other parts or tracks to access,
the OTHER PARTS/TR indicator is lit.
PAGE
When there are additional parts to the current
display, a page number indication, for...