Technics Keyboard Sx Kn7000 Owners Manual

Start the rhythm
There are two ways to start the rhythm.
Normal start
1.Select a rhythm.
2.Press the START/STOP button to turn it on.
•The selected rhythm pattern immediately
begins to play.
•You can stop the rhythm by pressing the
START/STOP button again to turn it off.
•The BEAT indicators above the START/STOP
button light to indicate the beat.
Synchronized start
With the synchronized start feature, the rhythm
pattern starts when you play a key on the key-
board.
1.Select a rhythm.
2.Press the SYNCHRO...

Playing the rhythm
Intro, fill-in and ending patterns fitting each different rhythm pattern are permanently recorded in your
Keyboard, thus allowing a versatile rhythm performance.
INTRO
Begin the rhythm performance with an intro pat-
tern.
1.Press the INTRO & ENDING 1 or INTRO &
ENDING 2 button to turn it on.
2.Press the START/STOP button to start the
rhythm.
•An intro pattern is played, after which the nor-
mal rhythm pattern begins.
COUNT INTRO
You can begin the rhythm performance with a
spoken...

ENDING
Finish the rhythm performance with an ending
pattern.
1.Select a rhythm and press the START/STOP
button.
2.Press the INTRO & ENDING 1 or INTRO &
ENDING 2 button to turn it on.
•An ending pattern is produced, and then the
rhythm performance stops.
•If you accidentally press the INTRO & END-
ING button in the middle of the tune, you can
press the FILL IN 1 or FILL IN 2 button. The
ending pattern stops, and a fill-in pattern is
produced, after which the normal rhythm per-
formance continues.
Auto...

Playing chords
Choose from three ways of playing chords.
BASIC mode
In the BASIC mode, a major chord can be played
just by  pressing the key for its root note.
Minor, seventh and minor seventh chords are also easily produced.
•When three or more keys of a chord are pressed, it is recognized as a  chord.
FINGERED mode
In the FINGERED mode, you specify the chord
by playing all the notes in the chord.
•Play at least three notes to specify the chord.
•If the CHORD FINDER procedure is used, you
can see the...

How to use the AUTO PLAY CHORD
1.Select the desired rhythm and sound(s), and
set the tempo.
2.Press the AUTO PLAY CHORD’s OFF/ON
button to turn it on.
3.Press the AUTO PLAY CHORD’s MODE but-
ton to turn it on.
•The display looks similar to the following.
4.Select an AUTO PLAY CHORD mode (BASIC,
FINGERED or PIANIST).
•After a few seconds, the display returns to the
previous display.
•If the BASIC or FINGERED mode was
selected, the keyboard automatically splits
into right and left sections.
MEMORY
When the...

Left Hold
This setting determines how the LEFT part
sounds when the LEFT button in the CONDUC-
TOR is on during a performance with the BASIC
or FINGERED mode.
1.Press the MODE button to turn it on.
•The display changes to the following.
2.Use the LEFT HOLD: ON/OFF button to set
the mode to on or off.
OFF:
The LEFT part sounds from the pressed chord
keys.
•When BASIC is selected, the LEFT part turns
off. The LEFT part sounds if you turn it on,
but  chords cannot be specified.
ON:
Specifying  chords in the...

CHORD FINDER
The CHORD FINDER can help, for example,
when you do not know which keys to press to
specify a given chord. When you input the chord
name, the CHORD FINDER shows you which
keys to press and even lets you hear the notes
that make up.
1.Press the AUTO PLAY CHORD’s MODE but-
ton to turn it on.
•The display changes to the following.
2.Select CHORD FINDER.
•The display changes to the following.
3.Use the APC MODE button to select the auto-
matic accompaniment mode you will use to
specify chords...

BREAK function
With the break function, the rhythm starts when
the left keyboard is played and stops when the
fingers are removed from the keys.
1.Select an AUTO PLAY CHORD mode.
•At this time, the MEMORY button should be
OFF.
2.Press the SYNCHRO & BREAK button to turn
it on.
3.Specify a chord.
•The automatic accompaniment begins to play
(synchronized start).
•For the PIANIST mode, play the keys to the
left of the currently set split point.
4.Release the chord keys.
•The automatic accompaniment stops....

FADE OUT
At the end of the song, the volume of each part
gradually fades to nothing.
1.Start the performance.
2.Turn on the FADE OUT button at the point you
want the fade-out to start.
•The volumes of all the parts slowly fade to 0.
•The indicator flashes to show that fade-out is
completed, and then goes out. The volumes
for all parts return to their specified settings.
•If you wish to interrupt the fade-out, press the
FADE OUT button to turn it off.
FADE SET
Adjust the settings for the FADE IN and FADE...

Sound Arranger
The SOUND ARRANGER feature lets you select other sounds for the AUTO PLAY CHORD parts of
each rhythm.
1.Select the rhythm whose sound you wish to
change.
•Do not select the MEMORY or CUSTOM but-
ton.
2.In the SOUND ARRANGER, press the SET
button to turn it on.
•The display looks similar to the following.
3.Use the 
 and  buttons to select the part
whose sound you wish to change.
4.Select the desired sound.
•The DIGITAL EFFECT on/off status can also
be specified (except for DRUMS part)....