Technics Keyboard Sx Kn7000 Owners Manual

Copy and paste the recorded data
You can copy and paste specific portions of the recorded data.
Select the function
1.On the SEQ MENU display, use the SONG
SELECT 
∧ and ∨ buttons to select the number
of the song. Then select COPY & PASTE.
•The display looks similar to the following.
2.On the COPY & PASTE display, select a func-
tion.
3.Perform the editing procedures. (See below.)
•During the editing procedure, if the indicator
for the TEMPO/PROGRAM is lit, you can use
the TEMPO/PROGRAM for the editing...

TRACK MERGE
Merge the recorded contents of two tracks
(source tracks) and store the merged contents
in a third track (destination track).
•When the TRACK MERGE function is ex-
ecuted, the data is erased from the two source
tracks.
1.Select the two source tracks (FROM).
•On the FROM side, use the TRACK 
∧ and ∨
buttons to select the two source tracks.
•You cannot select the track to which the CON-
TROL, RHYTHM or CHORD part has been
assigned.
•If the part assigned to the left source track
(“left” meaning...

MEASURE ERASE
Erase the recorded contents of specific meas-
ures. You can also specify which type of data is
to be erased.
•Note that only the contents of the measures
are erased, not the measures themselves; the
length of the performance remains the same.
1.Use the TRACK ∧ and ∨ buttons to specify
the track number.
•This function does not work for the RHYTHM
part or CHORD part in which a repeat com-
mand has been stored.
•If ALL is selected, data is erased from the
specified measures of all the tracks...

MEASURE INSERT
Insert specified measures at a specified point.
•The length of the performance accordingly in-
creases by the number of inserted measures.
1.Specify the measures you wish to copy from
the source track.
•On the FROM side, specify the settings with
the corresponding buttons.
TRACK:
Specify the track number you wish to copy
the measures from.
•This function does not work for the CHORD
or RHYTHM track in which the repeat func-
tion has been stored.
•If ALL is selected, the measures are in-...

Changing the note position etc. of the
recorded data
You can change the note pitch and position etc. of recorded data.
Select the function
1.On the SEQ MENU display, use the SONG
SELECT 
∧ and ∨ buttons to select the number
of the song. Then select RANGE EDIT.
•The display looks similar to the following.
2.On the RANGE EDIT display, select a function.
3.Perform the editing procedures. (See below.)
•During the editing procedure, if the indicator
for the TEMPO/PROGRAM is lit, you can use
the TEMPO/PROGRAM...

VELOCITY CHANGE
Modify the recorded velocity in specific measures
of specific tracks.
1.Use the TRACK ∧ and ∨ buttons to select the
track you wish to edit.
•You cannot select the track for the CONTROL,
RHYTHM or CHORD part.
•If ALL is selected, all tracks will be edited.
2.Use the FIRST MEASURE ∧ and ∨ buttons
to specify the start point (measure number) of
the velocity change.
3.Use the LAST MEASURE ∧ and ∨ buttons to
specify the end point (measure number) of the
velocity change.
4.Use the VELOCITY ∧ and...

ADVANCE/DELAY
Speed up or delay the sound production of
specified performance data.
1.Use the TRACK ∧ and ∨ buttons to select the
track you wish to edit.
•You cannot select the track for the CONTROL,
RHYTHM or CHORD part.
•If ALL is selected, all tracks will be edited.
2.Use the FIRST MEASURE ∧ and ∨ buttons
to specify the start point (measure number) of
the change.
3.Use the LAST MEASURE ∧ and ∨ buttons to
specify the end point (measure number) of the
change.
4.Use the ADVANCE/DELAY ∧ and ∨ buttons
to...

Outline of the Composer
The COMPOSER enables you to create your own accompaniment patterns. A pattern is comprised of 8
parts: DRUMS 1, 2, BASS and ACCOMP1–5 parts. These parts would form the backing of a song.
Rhythm components which can be stored
Different INTRO 1, 2, VARIATION 1 to 4,
ENDING 1, 2 patterns can be created for each
MEMORY (A, B, C).
•Each VARIATION is made of a PATTERN,
FILL 1 and FILL 2.
•A Maj (major) and Min (minor) pattern is avail-
able for each of the INTRO and ENDING 1
and 2....

COMPOSER menu
1.Press the PROGRAM MENUS button to turn
it on.
•The display looks similar to the following.
2.Select COMPOSER.
•The display looks similar to the following.
Three ways to record in the COMPOSER
There are three ways to create and record a
rhythm.
Simple recording method (page 110)
 Use EASY COMPOSER to quickly create a
unique rhythm just by selecting a pattern for each
part.
Create a completely new rhythm (page 110)
Compose all the parts of a completely new
rhythm from scratch.
•You can use...

Simple recording method
With EASY COMPOSER you can easily create a unique rhythm pattern by selecting a different style for
each part of the rhythm.
1.On the COMPOSER MENU display, select
EASY COMPOSER.
•The display looks similar to the following.
2.Use the MEM ∧ and ∨ buttons to select the
memory in which to record your rhythm.
•Select from A-vari 1 to 4, B-vari 1 to 4 and
C-vari 1 to 4.
3.Use the PART 
 and  buttons to select the
part.
•In the EASY COMPOSER, the new rhythm
pattern is divided into 9...