Technics Keyboard Sx Kn7000 Owners Manual
Have a look at the manual Technics Keyboard Sx Kn7000 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 152 Technics manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
One Touch Play ONE TOUCH PLAY automatically sets a suggested combination of sounds and an appropriate tempo for your chosen rhythm style. 1.Select a rhythm pattern. •Do not select the MEMORY button. 2.Press and hold the ONE TOUCH PLAY button for a few seconds. •During setting, the style name is shown on the display. •The AUTO PLAY CHORD and the SYNCHRO & BREAK are automatically turned on, and the sounds and effects, volume balances, tempo etc. that are ideal for your selected rhythm are automatically set. 3.Play the keyboard. •When you specify a chord, the automatic rhythm begins to play immediately. Music Stylist MUSIC STYLIST sets up your instrument with a suitable registration for a specific style of music or tune. Setup by music style Select a style from the MUSICAL CATEGORY. 1.Press the MUSIC STYLIST button to turn it on. •The display looks similar to the following.2.Select MUSICAL CATEGORY. •The display looks similar to the following. 3.Use the CATEGORY and buttons to select a category. 4.Use the STYLE and buttons to select a music style. •During the search, you can use the SKIP ∧ and ∨ buttons to skip to the previous or fol- lowing subcategory. SEQUENCER SD CARD CUSOMIZE FAVORITES CUSTOM PANELPLAY EASY REC DISK LOAD DISK IN USE + – + –LOADPROGRAM MENUS SOUND DSPVARIATION REVERB DIGITAL EFFECT MULTI SUSTAIN SOUND EXPLORER IW EXPANSION ACCORDION REGISTER DIGITAL DRAWBARTAB ORGANSAX & WOODWIND ORGAN & ACCORDION MALLET & ORCH PERC STRINGS & VOCALWORLD BRASS GUITAR PIANO CHORUS MEMORY DRUM KITS BASS SYNTH LATIN & WORLDMOVE SHOWBIG BAND & SWING BALL ROOM OFF/ON SOUND & ARRANGER MUSIC STYLIST SETENTERTAINERJAZZ COMBO CUSTOM MEMORY LOADPADMIC PART EFFECTSOUND GROUPMODERN DANCEGOSPEL & BLUESROCK & POPSOUL & FUNK COUNTRY OFF/ON AUTO SETTING BANK DEMO STOPAUTO PLAY CHORD APC/SEQUENCER VOLUME MAIN VOLUME MIC VOLUME MAX MAX MIN MINLINE IN VOLUMEMODEMARCH 8 & 16 BALLADRHYTHM GROUP RHYTHM GROUPGLOBAL EFFECT RIGHT2 LEFT DISPLAY HOLD PAGE EXITR1/R2 OCTAVE RIGHT1SOLO TECHNI-CHORD PART SELECT TRANSPOSE START/STOPSYNCHRO & BREAK OTHER PART & FR CONTRAST HELP INTRO & ENDINGTAP TEMPO FILL IN VARIATION & MSA 1 COUNT INTROSEQUENCER RESET4 3 2 1212 FADE MUSIC STYLE ARRANGERONE TOUCH PLAYSPLIT POINT IN OUTTEMPO/PROGRAMCONDUCTORMUTE NEXT BANK PANEL MEMORY BANK VIEW 7 85 146 23SET 1 43 6 5 2 MAX MINMAX OFF ONE TOUCH PLAY SEQUENCER SD CARD CUSOMIZE FAVORITES CUSTOM PANELPLAY EASY REC DISK LOAD DISK IN USE + – + –LOADPROGRAM MENUS SOUND DSPVARIATION REVERB DIGITAL EFFECT MULTI SUSTAIN SOUND EXPLORER IW EXPANSION ACCORDION REGISTER DIGITAL DRAWBARTAB ORGANSAX & WOODWIND ORGAN & ACCORDION MALLET & ORCH PERC STRINGS & VOCALWORLD BRASS GUITAR PIANO CHORUS MEMORY DRUM KITS BASS SYNTH LATIN & WORLDMOVE SHOWBIG BAND & SWING BALL ROOM OFF/ON SOUND & ARRANGER MUSIC STYLIST SETENTERTAINERJAZZ COMBO CUSTOM MEMORY LOADPADMIC PART EFFECTSOUND GROUPMODERN DANCEGOSPEL & BLUESROCK & POPSOUL & FUNK COUNTRY OFF/ON AUTO SETTING BANK DEMO STOPAUTO PLAY CHORD APC/SEQUENCER VOLUME MAIN VOLUME MIC VOLUME MAX MAX MIN MINLINE IN VOLUMEMODEMARCH 8 & 16 BALLADRHYTHM GROUP RHYTHM GROUPGLOBAL EFFECT RIGHT2 LEFT DISPLAY HOLD PAGE EXITR1/R2 OCTAVE RIGHT1SOLO TECHNI-CHORD PART SELECT TRANSPOSE START/STOPSYNCHRO & BREAK OTHER PART & FR CONTRAST HELP INTRO & ENDINGTAP TEMPO FILL IN VARIATION & MSA 1 COUNT INTROSEQUENCER RESET4 3 2 1212 FADE MUSIC STYLE ARRANGERONE TOUCH PLAYSPLIT POINT IN OUTTEMPO/PROGRAMCONDUCTORMUTE NEXT BANK PANEL MEMORY BANK VIEW 7 85 146 23SET 1 43 6 5 2 MAX MINMAX OFF MUSIC STYLIST Playing the rhythm Part II Playing the rhythm 61QQTG0671
•The AUTO PLAY CHORD and the SYNCHRO & BREAK turn on, and the sounds, effects, volume balances, rhythm and tempo etc. which are best suited for the selected music style are automatically selected. 5.Play the keyboard. •When you specify a chord, the automatic rhythm begins to play immediately. Setup by era You can select a style from a specific music era. 1.Press the MUSIC STYLIST button to turn it on. 2.Select MUSICAL ERA. •The display looks similar to the following. 3.Use the STYLE and buttons to select a style. •You can use the SKIP ∧ and ∨ buttons to skip to the previous or following era. •You can use the MORE button to view the next page of styles.•The AUTO PLAY CHORD and the SYNCHRO & BREAK turn on, and the sounds, effects, volume balances, rhythm and tempo etc. which are best suited for the selected style are automatically selected. 4.Play the keyboard. •When you specify a chord, the automatic rhythm begins to play immediately. Setup by alphabetical order You can use alphabetical or numerical search to select a style name. 1.Press the MUSIC STYLIST button to turn it on. 2.Select ALPHABETICAL LIST. •The display looks similar to the following. 3.Use the STYLE and buttons to select a style.•You can use the SKIP ∧ and ∨ buttons to skip to the previous or following alphabetical or numerical heading. •You can use the MORE button to view the next page of styles. •The AUTO PLAY CHORD and the SYNCHRO & BREAK turn on, and the sounds, effects, volume balances, rhythm and tempo etc. which are best suited for the selected style are automatically selected. 4.Play the keyboard. •When you specify a chord, the automatic rhythm begins to play immediately. Playing the rhythm Part II Playing the rhythm 62QQTG0671
Setup by organ style You can select a style from those suitable to play using the organ sounds. 1.Press the MUSIC STYLIST button to turn it on. 2.Select ORGAN STYLIST. •The display looks similar to the following. 3.Use the STYLE and buttons to select a style. •You can use the SKIP ∧ and ∨ buttons to skip to the previous or following alphabetical or numerical heading. •You can use the MORE button to view the next page of styles. •The AUTO PLAY CHORD and the SYNCHRO & BREAK turn on, and the sounds, effects, volume balances, rhythm and tempo etc. which are best suited for the selected style are automatically selected. 4.Play the keyboard. •When you specify a chord, the automatic rhythm begins to play immediately. Custom style selection You can select a style stored in CUSTOM, or a style loaded to CUSTOM from a disk/an SD card. •Details about the CUSTOM STYLE can be found on page 108. 1.Press the MUSIC STYLIST button to turn it on. 2.Select CUSTOM STYLIST. •The display looks similar to the following. 3.Use the STYLE and buttons to select a style. •You can use the SKIP ∧ and ∨ buttons to skip to the previous or following CUSTOM. •The AUTO PLAY CHORD and SYNCHRO & BREAK turn on, and the settings for the selected style are recalled. 4.Play the keyboard. •When you specify a chord, the automatic rhythm begins to play immediately. •On the MUSICAL CATEGORY, MUSICAL ERA, ALPHABETICAL LIST (ALPHABET) or ORGAN STYLIST display, you can move freely to each display using the buttons to the right of the display. •After deciding on a style with the MUSIC STYLIST, if you record the settings in the PANEL MEMORY, the same style name is copied to the PANEL MEMORY (up to 16 characters). When you recall the PANEL MEMORY settings, this style name is shown at the top of the normal display. •After selecting a style, turn the MUSIC STYLIST button off if you wish to have the normal display active during a performance. Playing the rhythm Part II Playing the rhythm 63QQTG0671
Music Style Arranger The MUSIC STYLE ARRANGER helps you to make professional registration changes during your performance. Select between four contrasting registrations at the push of a button, or let your instrument change the registration automatically for you when you use FILL IN 1 or 2. The MUSIC STYLE ARRANGER will also alter the accompaniment in character with the registration change creating a polished sounding arrangement. How to use the MUSIC STYLE AR- RANGER 1.Select a rhythm pattern. 2.Press the MUSIC STYLE ARRANGER button to turn it on. 3.Use the VARIATION buttons to select a style (1 to 4). •The nuance of the pattern differs with each number. •The panel settings (including the tempo) change according to the selected rhythm and music style. The AUTO PLAY CHORD, the MEMORY button and the SYNCHRO & BREAK button are automatically turned on. When a key on the left section of the keyboard is pressed, the automatic rhythm begins to play immediately. •During your performance, the style can be changed, but the tempo does not change. How to change the music style during your performance While you are playing the keyboard with the MUSIC STYLE ARRANGER on, press the FILL IN 1 or FILL IN 2 button. •Each time the FILL IN 1 button is pressed, the FILL IN 1 pattern plays, and then the music style changes in the 4 ➝ 3 ➝ 2 ➝ 1 order. And each time the FILL IN 2 button is pressed, the FILL IN 2 pattern plays, and then the style changes in the 1 ➝ 2 ➝ 3 ➝ 4 order. MUSIC STYLE ARRANGER mode You can define which panel settings change by pressing a FILL IN button when the MUSIC STYLE ARRANGER is used. 1.Press and hold the MUSIC STYLE AR- RANGER button for a few seconds. •The display changes to the following. 2.Select the mode. RHYTHM: Only the rhythm changes. SOUND & RHYTHM: The sound, effects, rhythms, etc. change. SEQUENCER SD CARD CUSOMIZE FAVORITES CUSTOM PANELPLAY EASY REC DISK LOAD DISK IN USE + – + –LOADPROGRAM MENUS SOUND DSPVARIATION REVERB DIGITAL EFFECT MULTI SUSTAIN SOUND EXPLORER IW EXPANSION ACCORDION REGISTER DIGITAL DRAWBARTAB ORGANSAX & WOODWIND ORGAN & ACCORDION MALLET & ORCH PERC STRINGS & VOCALWORLD BRASS GUITAR PIANO CHORUS MEMORY DRUM KITS BASS SYNTH LATIN & WORLDMOVE SHOWBIG BAND & SWING BALL ROOM OFF/ON SOUND & ARRANGER MUSIC STYLIST SETENTERTAINERJAZZ COMBO CUSTOM MEMORY LOADPADMIC PART EFFECTSOUND GROUPMODERN DANCEGOSPEL & BLUESROCK & POPSOUL & FUNK COUNTRY OFF/ON AUTO SETTING BANK DEMO STOPAUTO PLAY CHORD APC/SEQUENCER VOLUME MAIN VOLUME MIC VOLUME MAX MAX MIN MINLINE IN VOLUMEMODEMARCH 8 & 16 BALLADRHYTHM GROUP RHYTHM GROUPGLOBAL EFFECT RIGHT2 LEFT DISPLAY HOLD PAGE EXITR1/R2 OCTAVE RIGHT1SOLO TECHNI-CHORD PART SELECT TRANSPOSE START/STOPSYNCHRO & BREAK OTHER PART & FR CONTRAST HELP INTRO & ENDINGTAP TEMPO FILL IN VARIATION & MSA 1 COUNT INTROSEQUENCER RESET4 3 2 1212 FADE MUSIC STYLE ARRANGERONE TOUCH PLAYSPLIT POINT IN OUTTEMPO/PROGRAMCONDUCTORMUTE NEXT BANK PANEL MEMORY BANK VIEW 7 85 146 23SET 1 43 6 5 2 MAX MINMAX OFF MUSIC STYLE ARRANGER VARIATION 4 3 2 1 MUSIC STYLE ARRANGER 1 2FILL IN SEQUENCER RESETCOUNT INTRO Playing the rhythm Part II Playing the rhythm 64QQTG0671
PANEL MEMORY: The PANEL MEMORY number (BANK A: 1 to 4) changes. You can store your desired panel settings in the PANEL MEMORY beforehand and switch from one to another quickly. •After a few seconds, the display exits the set- ting mode.•You can also access this setting display from the CONTROL MENU display. (Refer to page 178.) Panel Memory PANEL MEMORY stores all the current panel settings so you can recall them at the push of a button. How to store the panel settings By storing all the panel settings you use for a song in the same bank, for example, you can switch from one panel setup to the next in a flash. 1.Set up the desired panel settings (sounds, volumes, etc.) 2.Press the BANK VIEW button to turn it on. •The BANK SELECT display appears. 3.Select the desired bank (A/B/C/1–10). •The bank selection display is comprised of two pages: 1/3 and 2/3. Use the PAGE buttons to switch pages. 4.With the SET button held down, press one of the numbered buttons of the PANEL MEMORY (1 to 8). •The panel settings are now stored in the specified bank and number. BANK VIEW After selecting a bank, you can use the PAGE buttons to go to the PAGE 3/3 page and confirm the memory names of that bank’s 8 memories. •You can use the BANK ∧ and ∨ buttons to view other banks. •You can also access this display by pressing and holding any of the PANEL MEMORY num- ber buttons (1 to 8) for a few seconds. SEQUENCER SD CARD CUSOMIZE FAVORITES CUSTOM PANELPLAY EASY REC DISK LOAD DISK IN USE + – + –LOADPROGRAM MENUS SOUND DSPVARIATION REVERB DIGITAL EFFECT MULTI SUSTAIN SOUND EXPLORER IW EXPANSION ACCORDION REGISTER DIGITAL DRAWBARTAB ORGANSAX & WOODWIND ORGAN & ACCORDION MALLET & ORCH PERC STRINGS & VOCALWORLD BRASS GUITAR PIANO CHORUS MEMORY DRUM KITS BASS SYNTH LATIN & WORLDMOVE SHOWBIG BAND & SWING BALL ROOM OFF/ON SOUND & ARRANGER MUSIC STYLIST SETENTERTAINERJAZZ COMBO CUSTOM MEMORY LOADPADMIC PART EFFECTSOUND GROUPMODERN DANCEGOSPEL & BLUESROCK & POPSOUL & FUNK COUNTRY OFF/ON AUTO SETTING BANK DEMO STOPAUTO PLAY CHORD APC/SEQUENCER VOLUME MAIN VOLUME MIC VOLUME MAX MAX MIN MINLINE IN VOLUMEMODEMARCH 8 & 16 BALLADRHYTHM GROUP RHYTHM GROUPGLOBAL EFFECT RIGHT2 LEFT DISPLAY HOLD PAGE EXITR1/R2 OCTAVE RIGHT1SOLO TECHNI-CHORD PART SELECT TRANSPOSE START/STOPSYNCHRO & BREAK OTHER PART & FR CONTRAST HELP INTRO & ENDINGTAP TEMPO FILL IN VARIATION & MSA 1 COUNT INTROSEQUENCER RESET4 3 2 1212 FADE MUSIC STYLE ARRANGERONE TOUCH PLAYSPLIT POINT IN OUTTEMPO/PROGRAMCONDUCTORMUTE NEXT BANK PANEL MEMORY BANK VIEW 7 85 146 23SET 1 43 6 5 2 MAX MINMAX OFF BANK VIEW PANEL MEMORY 7 85 146 23SET Playing the rhythm Part II Playing the rhythm 65QQTG0671
Assign a name to the bank/memory You can assign names to the banks and memo- ries. 1.Select a bank or memory. 2.Use the PAGE buttons to go to the PAGE 3/3 page on the display. 3.Press the BANK NAMING button to assign a name to the bank, or the MEMORY NAMING button for the memory. •The display looks similar to the following. 4.Use the buttons below the display to assign a name. •Press the ABC button to enter alphabetical characters. While the SHIFT button is pressed, upper case letters are entered. •Press the 123 button to enter numbers, etc. While the SHIFT button is pressed, you can enter symbols. •Press the POSITION button to move the cur- sor. •You can also use the TEMPO/PROGRAM dial to select the characters. •Press the INS button to enter a space at the cursor position. •Press the DEL button to erase the character at the cursor position. •Press the CLR button to erase the entire name. •Press the →← button to center the name. 5.When you have finished assigning the name, press the OK button. Recall the panel setup 1.Press the BANK VIEW button to turn it on. Select a bank. 2.Press the desired PANEL MEMORY number button (1 to 8). •The panel setup changes to the one stored in the specified memory. •You can then change the sound settings, etc. manually; however, the contents of the memory remain unchanged until you store them again. •The “Control Preset” bank of the PERFORM- ANCE PADS or the Foot Switch (sold sepa- rately) can also be used to change from one PANEL MEMORY setup to another. (Refer to pages 68, 179.) •The currently selected bank, memory number and memory name are shown in the top line on the normal display. NEXT BANK You can press the NEXT BANK button to switch to the next bank. This allows you to change banks without exiting the normal display. •Each time the NEXT BANK button is pressed, the bank indication changes in order (A → B → C → 1 → 2 ...). •The panel settings change when a PANEL MEMORY number button (1 to 8) is pressed. NEXT BANKPlaying the rhythm Part II Playing the rhythm 66QQTG0671
PANEL MEMORY mode You can define which panel settings are recalled when the PANEL MEMORY is used. 1.Press and hold the SET button for a few sec- onds. •The display changes to the following. 2.Select the mode. NORMAL: The sounds and volume balance, and CON- DUCTOR status are stored. EXPAND: All the instrument’s settings are stored, includ- ing the rhythm (except for SOUND AR- RANGER on/off status), TRANSPOSE, tempo, etc. •After a few seconds, the display exits the set- ting mode. EXPAND MODE FILTER You can specify which data is stored in the EX- PAND mode. 1.Use the PAGE buttons to access the PAGE 2/2 EXPAND MODE FILTER display. •The display looks similar to the following. 2.Use the ∧ and ∨ buttons to select the item. 3.Use the ON and OFF buttons to store the on or off status for the selected item. CUSTOM PANEL In addition to the regular PANEL MEMORY, this feature lets you store a favorite panel setup to recall any time by the press of a button. Even if the PANEL MEMORY data is changed when an automatic setting function is activated or the disk data load procedure is performed, for example, simply by pressing this button, your favorite panel setings are instantly restored. 1.Set up the instrument with your favorite set- tings. 2.Press the SET button and the CUSTOM PANEL button at the same time. •“COMPLETED!” is shown on the display. •The stored settings are recalled whenever you press the CUSTOM PANEL button to turn it on. •The stored contents are retained even when the power to the instrument is turned off. •You can select the range of settings that are included in the CUSTOM PANEL function. (Refer to page 185.) CUSOMIZE FAVORITES CUSTOM PANEL NEXT BANK PANEL MEMORY BANK VIEW 7 85 146 23SET Playing the rhythm Part II Playing the rhythm 67QQTG0671
Playing phrases During your performance, you can insert a short recorded phrase or effect sounds by pressing a pad button. A different group of phrases is recorded in each bank. 1.Press the BANK button. 2.Select the desired bank from the display. •The list of banks consists of three screen pages. Use the PAGE buttons to change the page. •“User Bank” A, B and C are for storing your original phrases. •“Compile Bank” 1 and 2 are for assigning phrases as you desire. •Various functions are assigned to each pad button in “Control Preset”. •When using the “Control Preset” bank, set the AUTO SETTING button to OFF. When using the PANEL MEMORY, turn off the PERFORM. PADS BANK of the EXPAND MODE FILTER. 3.Press a pad button (1 to 6). •A different phrase is assigned to each pad button. •Information about the phrase, such as its name and the measure number, is shown in the normal display. •The volume can be set with the buttons below the normal display (PADS). •The selected phrase is played in the current tempo. •To stop the phrase before it has ended, press the STOP button. •Some phrases continue to play until the STOP button is pressed (the [Loop] indication ap- pears). •During a rhythm performance, some phrases may play in time with the measure count. •When the automatic accompaniment is on, several phrases are played in the specified chord. SOLO Pad buttons 5 and 6 (SOLO) are phrases with chord progressions. Just by pressing one of these pad buttons, the phrase changes following a chord progression that is typical for the music genre of that bank. (Refer to the example below.) •Use with the automatic accompaniment during your performance. •Pad button 5 accesses a major chord progres- sion, and pad button 6 a minor chord progres- sion. AUTO SETTING When this button is set to on, the bank automat- ically changes according to the automatic setting functions in the ONE TOUCH PLAY, the MUSIC STYLE ARRANGER and the MUSIC STYLIST. When it is set to off, the bank does not automat- ically change according to these functions. SEQUENCER SD CARD CUSOMIZE FAVORITES CUSTOM PANELPLAY EASY REC DISK LOAD DISK IN USE + – + –LOADPROGRAM MENUS SOUND DSPVARIATION REVERB DIGITAL EFFECT MULTI SUSTAIN SOUND EXPLORER IW EXPANSION ACCORDION REGISTER DIGITAL DRAWBARTAB ORGANSAX & WOODWIND ORGAN & ACCORDION MALLET & ORCH PERC STRINGS & VOCALWORLD BRASS GUITAR PIANO CHORUS MEMORY DRUM KITS BASS SYNTH LATIN & WORLDMOVE SHOWBIG BAND & SWING BALL ROOM OFF/ON SOUND & ARRANGER MUSIC STYLIST SETENTERTAINERJAZZ COMBO CUSTOM MEMORY LOADPADMIC PART EFFECTSOUND GROUPMODERN DANCEGOSPEL & BLUESROCK & POPSOUL & FUNK COUNTRY OFF/ON AUTO SETTING BANK DEMO STOPAUTO PLAY CHORD APC/SEQUENCER VOLUME MAIN VOLUME MIC VOLUME MAX MAX MIN MINLINE IN VOLUMEMODEMARCH 8 & 16 BALLADRHYTHM GROUP RHYTHM GROUPGLOBAL EFFECT RIGHT2 LEFT DISPLAY HOLD PAGE EXITR1/R2 OCTAVE RIGHT1SOLO TECHNI-CHORD PART SELECT TRANSPOSE START/STOPSYNCHRO & BREAK OTHER PART & FR CONTRAST HELP INTRO & ENDINGTAP TEMPO FILL IN VARIATION & MSA 1 COUNT INTROSEQUENCER RESET4 3 2 1212 FADE MUSIC STYLE ARRANGERONE TOUCH PLAYSPLIT POINT IN OUTTEMPO/PROGRAMCONDUCTORMUTE NEXT BANK PANEL MEMORY BANK VIEW 7 85 146 23SET 1 43 6 5 2 MAX MINMAX OFF BANK SOLOSOLO 1 43 6 5 2 AUTO SETTING Part III Performance Pads Performance Pads 68QQTG0671
Copying phrases You can copy the desired data, as phrases, from the SEQUENCER to each pad memory of a “User Bank”. •Chord data also can be copied to pad buttons 5 and 6 (SOLO). PHRASE COPY Copy a phrase from one pad to another. 1.Press the PROGRAM MENUS button to turn it on. •The display looks similar to the following. 2.Select PERFORMANCE PADS. •The display looks similar to the following. 3.Select PHRASE COPY. •The display looks similar to the following. 4.Select the pad you wish to copy from. •Use the buttons on the FROM side to set the desired settings. BANK: Bank name PAD: Pad number (1 to 6) 5.Select the pad you wish to copy to. •Use the buttons on the TO side to set the desired settings. USER BANK: Bank name (USER A, B, C) PAD: Pad number (1 to 6) •Only a SOLO phrase can be copied to the SOLO pads (5 and 6). 6.Press the OK button. 7.Press the PROGRAM MENUS button to turn it off. •If you wish to modify a portion of the copied phrase, press the EDIT button to change to the recording display. PROGRAM MENUS Performance Pads Part III Performance Pads 69QQTG0671
SEQ TO PAD COPY 1.Record a phrase in the SEQUENCER, or load data from a disk. •After this procedure, please do not change the song number. •For details about SEQUENCER operation, refer to page 74. •For information about loading data, refer to pages 125, 140. 2.Press the PROGRAM MENUS button to turn it on. 3.Select PERFORMANCE PADS. 4.Select SEQ TO PAD COPY. •The display looks similar to the following. 5.Select the measures of SEQUENCER data you wish to copy from. •On the SEQUENCER side, use the buttons to make the corresponding settings. FIRST MEASURE: The first measure of the phrase you wish to copy. LAST MEASURE: The last measure of the phrase you wish to copy. TRANSPOSE: The setting to transpose the chords when they are copied. •The maximum that can be copied is 16 meas- ures. •When copying to pad button 5 or 6, the chord track is automatically displayed, and the chord data is also copied. However, when chord data from step record input does not exist, the measures are blank. •If you wish to convert the chords during play- back, set TRANSPOSE to the key of C and then copy the phrase. 6.Select the pad button you wish to copy to. •On the PERFORMANCE PAD side, use the buttons to make the corresponding settings. USER BANK: The name of the bank (A/B/C). PAD: Pad button number (1 to 6). PART: The part to copy to. TRACK: The track number to copy from. 7.Press the OK button. •A confirmation display appears. Press the YES button if you wish to copy the phrase, or press the NO button to cancel the procedure. 8.When you have completed the procedure, press the PROGRAM MENUS button to turn it off. Performance Pads Part III Performance Pads 70QQTG0671