Starplus Triad Xts Digital Telephone Systems Station User Guide

50 Dial-By-Name
To set up a Conference with Personal Park:
1. While connected to an outside line, depress the hookswitch 
momentarily. The intercom dial tone sounds.
2. Dial [438]. The first call is placed in personal park.
3. Dial desired number for second call.
4. Depress the hookswitch momentarily. The Intercom dial 
tone sounds.
5. Dial the code for SLT Conference Park [664]. All three parties 
are conferenced.
6. Hang up to terminate the conference.
Dial-By-Name
The system allows station users to...

Dial-By-Name 51
2. Dial person’s last name on the keypad as shown:
EXAMPLE -- To search for the name BROWN, press 
[2][7][6][9][6].
†When the system finds a unique numeric match to the 
name being dialed, the call is placed to the station 
matching the name.
†The intercom call signals the station according to the H-
T-P button.
†If fewer than 8 digits are dialed, the numeric match is 
dialed after a 10-second interdigit time-out occurs, or if 
[#] is pressed.
1
A-2
B-2
C-2D-3
E-3
F-3
G-4
H-4
I-4J-5
K-5...

52 Directory Dial
Directory Dial
Display telephone users may view a list of up to 200 names 
from the System Directory on the station’s LCD display. You can 
dial the station or speed dial bin by pressing a single button.
Names placed in the Directory List may be associated to 
intercom numbers, System Speed dial bins, or entries in the 
Local Number/Name Translation Table. You may view the 
Directory List beginning with any letter of the alphabet, then 
scroll through the list either forward or...

Directory Dial 53
Names beginning with the letter chosen display on the LCD 
display.
3. Dial [
6] to scroll up (next entry) through the list,
-or-
Dial [#] to scroll down (previous entry) through the list,
-or-
Press another key to view the list for a different letter of the 
alphabet.
4. When the desired name displays on the LCD, press the 
SPEED button to automatically dial the destination station 
or outside phone number (via speed dial).
If there are no names in the Directory List 
beginning with...

54 Do Not Disturb
To transfer a call using Directory Dialing while on a call:
1. Press the TRANS button.
2. Dial the Directory Dial Code [680] on the dial pad,
-or-
Press the flexible button programmed for directory dialing.
3. Press the digit associated with the person’s name and when 
it displays, press SPEED to automatically dial the 
destination station.
4. Hang up to complete the transfer.
SINGLE LINE TELEPHONE
Not applicable
Do Not Disturb
To activate Do Not Disturb:
Press the preprogrammed DND...

Executive Override 55
To cancel One-time Do Not Disturb:
Replace handset. The DND button LED extinguishes and 
DND cancels.
SINGLE LINE TELEPHONE
To activate Do Not Disturb:
1. Lift the handset.
2. Dial [631].
3. Replace the handset.
To remove Do Not Disturb:
1. Lift the handset.
2. Dial [631] or [662].
3. Replace the handset.
Executive Override
Executive Override allows stations designated as “Executive” 
the ability to override and “barge in” on other keysets engaged 
in CO Line conversations. A...

56 Flash
Flash
When connected to an outside line:
Press FLASH to disconnect the outside line and reseize an 
outside line dial tone.
» » » 8-button telephone users can assign a FLASH button 
by using code [660].
Flash Key on Intercom
When connected to a page zone or another internal party:
Press FLASH to disconnect page or intercom call. An 
intercom dial tone will sound.
Flexible Button Programming
To program a flexible button (to use feature codes):
1. Press SPEED twice.
2. Press button to be...

Group Listening 57
5. Press ON/OFF.
To erase a flexible button:
1. Press SPEED twice.
2. Press the flexible button to be erased.
3. Press FLASH. Confirmation tone sounds.
4. Press ON/OFF.
To check flexible button programming:
1. Lift handset.
2. Press SPEED, then dial [7] + [#].
3. Dial [2] to select the KEYBTN option.
4. Press desired flexible button(s) to display programming for 
the button(s) on the LCD.
5. When finished, replace the handset.
Group Listening
All digital key stations have a built-in...

58 Headset Mode
Headset Mode
The user connects the modular headset to the handset jack on 
the telephone leaving the handset in place. The ON/OFF 
button on the Digital Telephone is used to initiate and end calls 
while using the headset.
To activate Headset Mode:
Dial [634] on the dial pad,
-or-
Press preprogrammed HEADSET MODE button. LED lights 
steady.
To deactivate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the preprogrammed HEADSET MODE button. LED 
extinguishes.
SINGLE LINE TELEPHONE...

Intercom 59
Intercom
Using an Intercom Button 
To program a Flexible Button as an Intercom Button:
1. Press the SPEED button twice.
2. Press the desired flexible button to program.
3. Dial [645] on the dial pad. A confirmation tone sounds. If an 
error was made during entry, error tone sounds.
When intercom call rings a busy station (w/intercom btn):
1. The calling station receives ringback tone instead of busy 
tone. The called station hears muted or reminder ring and 
their intercom button LED starts...