Sony Xb10 User Manual

Hint
When making or receiving  a  call, only  operate  the  speaker  where the   (BLUETOOTH ) indicator lights up.
If  any other  BLUETOOTH  device(s), such  as a  BLUETOOTH  mouse  or BLUETOOTH keyboard,  is connected to  the  BLUETOOTH  device that  is
connecting  with the  speaker,  there  may be  distorted  sound or noise  in the  speaker  output. In  this  case,  terminate the  BLUETOOTH  connection
between the  BLUETOOTH  device and  other  BLUETOOTH  device(s).
Note
If  you reset or initialize...

Related Topic
Switching between  double  mode and stereo  mode (Speaker Add  function)
4- 694- 214- 11(2)  Copyright 2017  Sony Corporation
57  

Help Guide
Wireless  Speaker
SRS-XB10
Switching between double mode  and  stereo mode  (Speaker  Add function)
Using  two  speakers, you can switch  between  monaural  playback  (double mode) and stereo  playback  (stereo mode).
Press the  ADD button  on  either of the  speakers  to change  the  audio  reproduction.
Each time you press the  ADD  button, the  mode changes.
The L /R  indicators on both  speakers show  the  status of audio reproduction.
 Double  mode:  The L /R  indicators on both  speakers...

Related TopicListening  to music wirelessly  with  two  speakers (Speaker Add  function)
4- 694- 214- 11(2)   Copyright 2017  Sony Corporation
59  

Help Guide
Wireless  Speaker
SRS-XB10
Terminating the Speaker Add function temporarily
To  terminate  the  Speaker Add  function temporarily, follow  the  procedure below.Hint
The Speaker Add function will  not  be  terminated even if the  speaker  is turned  off.  When the  speaker  is turned  on,  the  speaker  will  try  to  establish
the  Speaker Add function with the  other  speaker  that  had  been connected. If  you want  to  use the  Speaker Add function again, turn on  the  other
speaker.  To...

Help Guide
Wireless  Speaker
SRS-XB10
Listening to music of a portable audio  device,  etc.
You  can use the  speaker  as an ordinary wired  speaker  system  by connecting a  portable audio device,  etc., using  an audio cable
(not supplied).
Connect  a device to the  AUDIO IN jack  with  an  audio  cable  (not  supplied).For connection, use an audio cable  with  a  stereo  mini plug (no resistance)
* at both  ends.
1
If  you use an  audio cable  (with  stereo mini  plugs) with significant resistance,...

Hint
When you cannot  hear  the  sound,  raise the  volume on  the  connected device.
If  the  BLUETOOTH connection  is active, you can use the  hands-free function while  listening  to  music of  a  portable audio device, etc. that  is
connected to  the  speaker’s  AUDIO IN jack.
Note
When listening  to  music via  BLUETOOTH  connection,  the  output from the  BLUETOOTH  device has priority  even if you connect an  audio cable  to
the   AUDIO IN jack and  play  back.  Stop playback  of  the  BLUETOOTH...

Help Guide
Wireless  Speaker
SRS-XB10
Receiving a call
You  can enjoy  hands- free calls  with  a  BLUETOOTH mobile  phone  that supports the  BLUETOOTH profile HFP (Hands- free
Profile)  or HSP  (Headset Profile)  via BLUETOOTH  connection.
If  your  BLUETOOTH  mobile  phone  supports both  HFP and HSP , set  it to HFP.
Operations may vary depending on the  BLUETOOTH  mobile  phone. Refer to the  operating  instructions supplied with  the
mobile  phone.
About ring tones
When an incoming  call arrives,...

Hint
Some BLUETOOTH mobile  phones  have handset  use priority  when  receiving  a  call. In  the  case  of  the  HFP or HSP  connection,  switch the  call
device to  the  speaker  by operating your  BLUETOOTH  mobile  phone.
The volume of  music playback  and  calling  is set independently in the  speaker.
If  the  caller  cannot  hear  or can barely hear  your  voice, talk  more  directly into the  microphone of  the  speaker.
Note
If  no ring tone  is heard  via the  speaker, the  speaker  may not  be...

When using  the  Speaker Add function, sound of  the  phone call is output from only  the  speaker  where the   (BLUETOOTH ) indicator lights up  in
white.
Depending  on  the  BLUETOOTH  mobile  phone, playback  may not  pause when  an  incoming  call arrives.
Use a  BLUETOOTH  mobile  phone at  least  50  cm (1.6 ft) away from the  speaker.  Noise  may result if the  speaker  and  the  BLUETOOTH  mobile
phone are too  close.
Depending  on  the  model of  your  smartphone,  the  operation system or...