Sony Xb10 User Manual

Notes on charging
4- 694- 214- 11(2)  Copyright 2017  Sony Corporation
6  

Help Guide
Wireless  Speaker
SRS-XB10
Turning the power on
Note
When the  CHG (charge) indicator flashes slowly in orange,  the  battery is running low and  needs to  be  charged.
Related Topic
Turning  the  power off
4- 694- 214- 11(2)   Copyright 2017  Sony Corporation
Press the   (power)   PAIRING button.
The 
 ( BLUETOOTH )  indicator  flashes  slowly in  white.
When you turn on the  speaker  for  the  first time after  purchase or there is no pairing  information  stored  in  the  speaker, the  
 (...

Help Guide
Wireless  Speaker
SRS-XB10
Turning the power off
Related TopicAuto power off function
4- 694- 214- 11(2)   Copyright 2017  Sony Corporation
Press the   (power)   PAIRING button.
The 
 ( BLUETOOTH )  indicator  turns off.
1
8  

Help Guide
Wireless  Speaker
SRS-XB10
Auto power off function
If  the  speaker  is not  connected to a  BLUETOOTH device via BLUETOOTH for  15 minutes,  it turns off automatically.
Note
When an  audio cable  is connected to  the  speaker’s  AUDIO IN jack, the  auto  power off  function is disabled.
4- 694- 214- 11(2)   Copyright 2017  Sony Corporation
9  

Help Guide
Wireless  Speaker
SRS-XB10
How to make  a wireless connection with BLUETOOTH devices
You  can enjoy  music and hands- free calling with  the  speaker  wirelessly  by using  your  device’s BLUETOOTH  function.
Before  operating  the  speaker, be sure  to do the  following: Place the  BLUETOOTH  device within  1  m (3 ft) of the  speaker.
Connect the  speaker  to a  booted computer  or AC  outlet via a  USB  AC  adaptor  (not supplied), otherwise charge the  battery
sufficiently.
Stop playback...

NFC
NFC (Near Field  Communication) is a  technology enabling  short- range  wireless communication between  various devices,
such as smartphones  and IC tags.
Thanks to the  NFC  function,  data  communication -  for  example, BLUETOOTH  pairing  -  can be achieved  easily  by simply
touching  NFC - compatible devices  together (i.e.,  at the  N - mark symbol  or location designated on each  device).
Note
Once  the  BLUETOOTH  devices  are paired, there  is no  need to  pair  them again, except  in the...

Help Guide
Wireless  Speaker
SRS-XB10
Pairing and  connecting with a BLUETOOTH device
The speaker  can be paired  with  up to 8  BLUETOOTH  devices.
When pairing  with  two  or more BLUETOOTH  devices, perform the  following pairing  procedure for  each  device.
Before  operating  the  speaker, be sure  to do the  following:  
Place the  BLUETOOTH  device within  1  m (3 ft) of the  speaker.
Connect the  speaker  to a  booted computer  or AC  outlet via a  USB  AC  adaptor  (not supplied), otherwise...

Hint
For details on  operating a  BLUETOOTH device, refer to  the  operating instructions supplied with the  BLUETOOTH  device.
Note
The pairing  mode of  the  speaker  is released  after  about 1  minute  and  the   (BLUETOOTH ) indicator flashes slowly.  However, when  pairing
information  is not  stored in the  speaker,  such  as at  the  factory  settings, the  pairing  mode is not  released.  If  the  pairing  mode is released  before
finishing  the  process, repeat  from step 
.
When pairing  with...

Pairing  information  has been deleted  after  repair,  etc.
The speaker  is already  paired with 8  devices  and  another  device is to  be  paired. 
The speaker  can be  paired with up  to  8  devices.  If  a  new  device is paired after  8  devices  have already  been paired, the  paired device with the
oldest  connection  time is replaced  by the  new  one.
The pairing  information  of  the  speaker  has been deleted  from the  BLUETOOTH device.
The speaker  is initialized.
All  pairing  information...

Help Guide
Wireless  Speaker
SRS-XB10
Connecting with a paired BLUETOOTH device
Check the  following before you operate  the  speaker.
If  the  speaker  was  previously paired  with  a  different device,  turn off the  BLUETOOTH function for  the  other device.
Turn on  the  speaker.
The 
 (BLUETOOTH )  indicator  begins  to flash in  white.
When you turn on the  speaker, the  speaker  tries to make a  BLUETOOTH  connection with  the  last  connected BLUETOOTH
device.  If  the  device is nearby and its...