Sony Xb10 User Manual

Hint
The operation above is an  example. For more  details, refer to  the  operating instructions supplied with the  computer.
Note
When the  speaker  made a  connection  automatically  with the  last  connected BLUETOOTH device, the  BLUETOOTH function may not  work
properly. In  this  case,  terminate the  BLUETOOTH  connection  by operating the  connected BLUETOOTH  device and  reestablish  a  connection.
Related Topic
How  to make a  wireless connection with  BLUETOOTH  devices
Pairing and connecting...

Help Guide
Wireless  Speaker
SRS-XB10
Connecting with a paired computer (Windows  7)
Before  operating  the  speaker, be sure  to do the  following:
Depending on your  computer, it may be necessary  to turn on the  built- in  BLUETOOTH  adaptor. For details on how to turn on
a  built- in  BLUETOOTH  adaptor, refer to the  operating  instructions supplied with  the  computer.
If  the  speaker  was  previously paired  with  a  different device,  turn off the  BLUETOOTH  function for  the  other device....

Confirm [Listen to Music].
If  [Listen to Music] appears: Proceed to the  next step.
If  [Connecting to Bluetooth service ] occurs  automatically and a  checkmark appears: The connection is complete.
Check that the  
 ( BLUETOOTH )  indicator  on the  speaker  lights  up in  white.
If  [Searching services] leads  to an error:  The speaker  is connected to a  different nearby BLUETOOTH device.
Disconnect  by operating  the  connected device,  and then  repeat the  operation  from the  previous  step...

Hint
The operation above is an  example. For more  details, refer to  the  operating instructions supplied with the  computer.
Note
When the  speaker  made a  connection  automatically  with the  last  connected BLUETOOTH device, the  BLUETOOTH function may not  work
properly. In  this  case,  terminate the  BLUETOOTH  connection  by operating the  connected BLUETOOTH  device and  reestablish  a  connection.
Related Topic
How  to make a  wireless connection with  BLUETOOTH  devices
Pairing and connecting...

Help Guide
Wireless  Speaker
SRS-XB10
Listening to music of a device via BLUETOOTH connection
You  can enjoy  listening to music of a  BLUETOOTH device and operate  it by the  speaker  via BLUETOOTH  connection if it
supports the  following BLUETOOTH  profiles.
A2DP  (Advanced Audio Distribution Profile)
Enables you to enjoy  high- quality audio contents  wirelessly.
AVRCP (Audio Video Remote Control Profile)
Enables you to adjust the  volume of a  BLUETOOTH  device.
Operations may vary depending on the...

Hint
The battery can be  charged if the  speaker  is connected to  a  booted computer or AC  outlet via  a  USB AC  adaptor  (not supplied) though the
speaker  is in use.
Depending  on  the  BLUETOOTH  device, it may be  necessary  to  adjust  the  volume or set the  audio output setting  on  the  connected device.
When you set the  volume to  the  maximum or minimum level on  the  speaker,  the  
 ( BLUETOOTH ) indicator flashes 3  times.
Depending  on  the  BLUETOOTH  device, you may not  be  able to...

Related TopicHow  to make a  wireless connection with  BLUETOOTH  devices
Terminating the  BLUETOOTH  connection (After use)
4- 694- 214- 11(2)  Copyright 2017  Sony Corporation
52  

Help Guide
Wireless  Speaker
SRS-XB10
Terminating the BLUETOOTH connection (After use)
When you finish  playing  music with  the  BLUETOOTH  device,  perform any of the  following operations to terminate  the
BLUETOOTH  connection.
Turn off the  BLUETOOTH  function on the  BLUETOOTH  device.  For details,  refer to the  operating  instructions supplied with
the  device.
Turn off the  BLUETOOTH  device.
Turn off the  speaker.
Touch  the  NFC - compatible device on the  speaker  again (if your  device has...

Help Guide
Wireless  Speaker
SRS-XB10
Listening to music wirelessly with two speakers  (Speaker  Add function)
By  connecting two  SRS- XB10 speakers via BLUETOOTH, you can select audio reproduction  between  stereo  mode (stereo sound)
and double  mode (monaural sound). To  use this  function,  two  SRS- XB10 speakers are required.
Select  from the  following two  playback  methods.
Double mode
Both speakers play the  same sound.  Double  mode is the  initial setting.
Stereo  mode
One speaker  plays...

Set up  the  second  speaker.2Press  the  
 (power)   PAIRING  button  on the  second speaker  to turn it on.
The 
 ( BLUETOOTH )  indicator  of the  speaker  begins  to flash in  white.
1 .
Press  and hold the  ADD  button  for  about 3  seconds until a  beep is heard.
When the  BLUETOOTH  connection is established, the  
 (BLUETOOTH )  indicators of the  2  speakers flash in  white. The
L /R  indicators then  light up.
Hint
If  the  2  speakers quickly make a  BLUETOOTH  connection,  both  the...