Sony Xb10 User Manual

							Hint
The operation above is an  example. For more  details, refer to  the  operating instructions supplied with the  computer.
Note
When the  speaker  made a  connection  automatically  with the  last  connected BLUETOOTH device, the  BLUETOOTH function may not  work
properly. In  this  case,  terminate the  BLUETOOTH  connection  by operating the  connected BLUETOOTH  device and  reestablish  a  connection.
Related Topic
How  to make a  wireless connection with  BLUETOOTH  devices
Pairing and connecting with  a  computer  (Windows 8 )
Listening  to music of a  device via BLUETOOTH  connection
Terminating the  BLUETOOTH  connection (After use)
4- 694- 214- 11(2)  Copyright 2017  Sony Corporation
46  
						

							Help Guide
Wireless  Speaker
SRS-XB10
Connecting with a paired computer (Windows  7)
Before  operating  the  speaker, be sure  to do the  following:
Depending on your  computer, it may be necessary  to turn on the  built- in  BLUETOOTH  adaptor. For details on how to turn on
a  built- in  BLUETOOTH  adaptor, refer to the  operating  instructions supplied with  the  computer.
If  the  speaker  was  previously paired  with  a  different device,  turn off the  BLUETOOTH  function for  the  other device.
Turn on  the  speaker.
The 
 (BLUETOOTH )  indicator  begins  to flash in  white.
When you turn on the  speaker, the  speaker  tries to make a  BLUETOOTH  connection with  the  last  connected BLUETOOTH
device.  If  the  device is nearby and its BLUETOOTH  function is on,  the  BLUETOOTH connection is established automatically
and the  
 ( BLUETOOTH )  indicator  stays  lit. When you want to connect another  BLUETOOTH  device,  terminate  the  current
BLUETOOTH  connection by operating  the  currently connected BLUETOOTH  device.
1
Search for the  speaker  on  the  computer.
2 Click  the  [ Start] button  and then  [Devices  and Printers ].
1 .
Double - click  [SRS - XB10].2 .
47  
						

							Confirm [Listen to Music].
If  [Listen to Music] appears: Proceed to the  next step.
If  [Connecting to Bluetooth service ] occurs  automatically and a  checkmark appears: The connection is complete.
Check that the  
 ( BLUETOOTH )  indicator  on the  speaker  lights  up in  white.
If  [Searching services] leads  to an error:  The speaker  is connected to a  different nearby BLUETOOTH device.
Disconnect  by operating  the  connected device,  and then  repeat the  operation  from the  previous  step (substep 2).
3 .
Click  [Listen to Music ].
A check mark appears when  the  connection has been made.
4 .
Check that the   (BLUETOOTH )  indicator has  switched from flashing  to a steady light.
When the  speaker  is connected to the  computer, the  
 ( BLUETOOTH )  indicator  stays  lit. You  can enjoy  playing  back music
from your  computer.
3
48  
						

							Hint
The operation above is an  example. For more  details, refer to  the  operating instructions supplied with the  computer.
Note
When the  speaker  made a  connection  automatically  with the  last  connected BLUETOOTH device, the  BLUETOOTH function may not  work
properly. In  this  case,  terminate the  BLUETOOTH  connection  by operating the  connected BLUETOOTH  device and  reestablish  a  connection.
Related Topic
How  to make a  wireless connection with  BLUETOOTH  devices
Pairing and connecting with  a  computer  (Windows 7 )
Listening  to music of a  device via BLUETOOTH  connection
Terminating the  BLUETOOTH  connection (After use)
4- 694- 214- 11(2)  Copyright 2017  Sony Corporation
49  
						

							Help Guide
Wireless  Speaker
SRS-XB10
Listening to music of a device via BLUETOOTH connection
You  can enjoy  listening to music of a  BLUETOOTH device and operate  it by the  speaker  via BLUETOOTH  connection if it
supports the  following BLUETOOTH  profiles.
A2DP  (Advanced Audio Distribution Profile)
Enables you to enjoy  high- quality audio contents  wirelessly.
AVRCP (Audio Video Remote Control Profile)
Enables you to adjust the  volume of a  BLUETOOTH  device.
Operations may vary depending on the  BLUETOOTH  device.  Refer also to the  operating  instructions supplied with  the
BLUETOOTH  device.
Note
Make sure  beforehand that  the  volume on  the  BLUETOOTH  device and  speaker  are set to  a  moderate level to  avoid  sudden  loud sound output
from the  speaker.
Connect  the  speaker  with  the  BLUETOOTH  device.
The 
 ( BLUETOOTH )  indicator  lights  up in  white  when  the  BLUETOOTH  connection is established.
1
Start playback  on  the  BLUETOOTH  device.
2
Adjust the  volume  by pressing the  –/+  (volume) buttons  on  the  speaker  or operating the   BLUETOOTH
device.
When you press the  – /+  (volume) buttons on the  speaker  or adjust the  volume on the  BLUETOOTH  device,  the  
3
50  
						

							Hint
The battery can be  charged if the  speaker  is connected to  a  booted computer or AC  outlet via  a  USB AC  adaptor  (not supplied) though the
speaker  is in use.
Depending  on  the  BLUETOOTH  device, it may be  necessary  to  adjust  the  volume or set the  audio output setting  on  the  connected device.
When you set the  volume to  the  maximum or minimum level on  the  speaker,  the  
 ( BLUETOOTH ) indicator flashes 3  times.
Depending  on  the  BLUETOOTH  device, you may not  be  able to  adjust  the  volume of  the  speaker  by the  connected device.
Note
If  the  communication condition  is poor,  the  BLUETOOTH  device may react incorrectly  against the  operations  on  the  speaker.
If  the  battery level is low, the  maximum output of  the  speaker  decreases.
( BLUETOOTH )  indicator  flashes  once  or 3  times  in  white.
During  playback, you can use the  buttons on the  speaker  to perform the  following operations.
Pause
Press  the   (play) button  during  playback  to pause.  Press  it again to cancel pause.
Skip to the beginning  of the next track
Press  the   (play) button  twice during  playback.
51  
						

							Related TopicHow  to make a  wireless connection with  BLUETOOTH  devices
Terminating the  BLUETOOTH  connection (After use)
4- 694- 214- 11(2)  Copyright 2017  Sony Corporation
52  
						

							Help Guide
Wireless  Speaker
SRS-XB10
Terminating the BLUETOOTH connection (After use)
When you finish  playing  music with  the  BLUETOOTH  device,  perform any of the  following operations to terminate  the
BLUETOOTH  connection.
Turn off the  BLUETOOTH  function on the  BLUETOOTH  device.  For details,  refer to the  operating  instructions supplied with
the  device.
Turn off the  BLUETOOTH  device.
Turn off the  speaker.
Touch  the  NFC - compatible device on the  speaker  again (if your  device has the  NFC  function).
Hint
The speaker  turns off  automatically  by the  auto  power off  function when  the  speaker  satisfies the  following conditions for 15  minutes, and  the
BLUETOOTH  connection  is terminated.
No  operation on  the  speaker.
No  BLUETOOTH  connection  has been established between the  speaker  and  a  smartphone  or mobile  via  HFP/ HSP.
HFP and  HSP  are types  of  BLUETOOTH  profiles.
HSP  (Headset Profile): Allows calling/cellular  phone operation.
HFP (Hands-Free Profile): Allows hands-free calling/cellular  phone operation.
No  music (sound)  is played  when  the  speaker  is connected to  a  BLUETOOTH  device.
When using  the  Speaker Add function, if you turn off  one  speaker,  the  other  speaker  is automatically  turned  off.  The BLUETOOTH  connection
between them is disconnected.
When you finish playing music, the  BLUETOOTH  connection  may terminate automatically  depending  on  the  BLUETOOTH  device.
To disconnect the  smartphone  by One-touch ( NFC), the  app  may need to  be  running on  the  connected device depending  on  the  device.
Related Topic
Turning  the  power off
Auto power off function
Disconnecting the  NFC - compatible device by One- touch ( NFC)
4- 694- 214- 11(2)  Copyright 2017  Sony Corporation
53  
						

							Help Guide
Wireless  Speaker
SRS-XB10
Listening to music wirelessly with two speakers  (Speaker  Add function)
By  connecting two  SRS- XB10 speakers via BLUETOOTH, you can select audio reproduction  between  stereo  mode (stereo sound)
and double  mode (monaural sound). To  use this  function,  two  SRS- XB10 speakers are required.
Select  from the  following two  playback  methods.
Double mode
Both speakers play the  same sound.  Double  mode is the  initial setting.
Stereo  mode
One speaker  plays  the  sound on the  right  channel (right side), while the  other speaker  plays  the  sound on the  left  channel (left
side)  for  stereo  playback  between  the  speakers.
Note
Turn off  both  speakers before  setting  up  the  Speaker Add function.
Set up  the  first speaker.1 Press  the  
 (power)   PAIRING  button  on one of the  speakers to turn it on.
The 
 ( BLUETOOTH )  indicator  begins  to flash in  white.
1 .
Press  and hold the  ADD  button  for  about 3  seconds until a  beep is heard.
The 
 ( BLUETOOTH )  indicator  keeps flashing.
2 .
54  
						

							Set up  the  second  speaker.2Press  the  
 (power)   PAIRING  button  on the  second speaker  to turn it on.
The 
 ( BLUETOOTH )  indicator  of the  speaker  begins  to flash in  white.
1 .
Press  and hold the  ADD  button  for  about 3  seconds until a  beep is heard.
When the  BLUETOOTH  connection is established, the  
 (BLUETOOTH )  indicators of the  2  speakers flash in  white. The
L /R  indicators then  light up.
Hint
If  the  2  speakers quickly make a  BLUETOOTH  connection,  both  the   (BLUETOOTH ) indicator and  the  L / R  indicators  may light  up.
Set up  the  second speaker  within  1  minute.  If  you do  not  set it up  within  1  minute,  the  setting  of  the  first speaker  will  be  canceled.
2 .
55