Sony Xb10 User Manual

							Help Guide
Wireless  Speaker
SRS-XB10
Pairing and  connecting with a computer (Windows  8)
Pairing is the  process required to mutually register  the  information  on BLUETOOTH  devices  to be connected wirelessly.
It  is necessary  to pair a  device with  the  speaker  to be able to make a  BLUETOOTH  connection for  the  first time.  Perform  same
procedures  to pair to other devices.
Do the  following before starting.
Make sure  that your  computer  has the  BLUETOOTH  wireless function.
Place the  speaker  within  1  m (3 ft) of the  computer.
Connect the  speaker  to a  booted computer  or AC  outlet via a  USB  AC  adaptor  (not supplied), otherwise charge the  battery
sufficiently.
Locate  the  operating  instructions supplied with  the  computer  for  reference.
Stop playback  on the  computer.
Turn down  the  volume of the  computer  and speaker  to avoid  any sudden loud sound output  from the  speaker.
Activate  the  BLUETOOTH  function on your  computer. For details how to activate the  BLUETOOTH  function or to confirm that
your  computer  has the  BLUETOOTH  function,  refer to the  operating  instructions of the  computer.
Set the  computer  speakers to ON mode.  If  the  computer  speakers are set  to “Mute (OFF)”  mode,  sound will  not  be produced by the  BLUETOOTH  speakers.
Computer  speakers in  “ Mute (OFF)”  mode
Computer  speakers in  ON mode
Prepare to search for the  speaker  on  the  computer.1
Select  [Desktop ] from the  Start menu.
1 .
Align your  mouse  with  the  right  side of the  screen  (if using  a  touch panel, swipe  from the  right  edge of the  screen), and
select [Settings ] from the  charms that are displayed.2 .
26  
						

							When the  [Settings] charms are displayed, click  [Control Panel ].3 .
When [All Control Panel  Items] is displayed, select [Devices  and Printers ].
If  the  [Control Panel ] screen  appears instead of [All Control Panel  Items],  select [Large  icons ] or [Small icons ] from the [ View  by] menu in  the  top  right  corner of the  screen.
The following screen  appears.
4 .
27  
						

							Turn on  the  speaker.
The 
 (BLUETOOTH )  indicator  begins  to flash in  white.
When you turn on the  speaker  for  the  first time after  purchase,  the   (BLUETOOTH )  indicator  will  begin to flash quickly
in  white  and the  speaker  enters  pairing  mode automatically by just  turning on the  speaker. Proceed to step 
.
When you turn on the  speaker, the  speaker  tries to make a  BLUETOOTH  connection with  the  last  connected
BLUETOOTH  device.  If  the  device is nearby and its BLUETOOTH  function is on,  the  BLUETOOTH connection is
established automatically and the  
 ( BLUETOOTH )  indicator  stays  lit. When you want to connect another  BLUETOOTH
device,  terminate  the  current BLUETOOTH  connection by operating  the  currently connected BLUETOOTH  device.
2
Press and  hold  the  
 (power)   PAIRING  button  until you  hear beeps and  the   (BLUETOOTH )
indicator begins to flash quickly  in white.
The speaker  enters  pairing  mode.3
Perform  the  pairing  procedure  on  the  computer.
4 Click  [Add  a  device ].
1 .
28  
						

							Select  [SRS - XB10] and click  [Next].
If  a  passkey* is required,  enter “0000.”
If  [SRS - XB10] does  not  appear,  perform the  operation  again from step 
.
2 .
A  passkey  may be  called “Passcode,” “PIN code,” “PIN number,”  or “Password.”*
When the  following screen  appears, click  [ Close ].
The computer  begins  installing the  driver.
The “”  mark will  appear in  the  bottom left  of the  [SRS - XB10] icon during  installation.  When the  “”  mark
disappears,  driver installation is complete. Proceed to the  next step (substep 4).
3 .
29  
						

							Depending on the  computer, installation may take time.  If  driver installation takes  too  much time,  the  auto  power off
function of the  speaker  will  cause it to turn off automatically. If  this  happens, turn on the  speaker  again.
Right - click  on [SRS - XB10] in  [Devices] and select [Sound settings] from the  menu that appears.
4 .
Confirm [SRS - XB10 Stereo] on the  [ Sound] screen.
If  there is a  checkmark (green) on [SRS - XB10 Stereo],  proceed to step 
.
If  there is not  a  checkmark (green) on [SRS - XB10 Stereo],  proceed to the  next step (substep 6).
If  [SRS - XB10 Stereo] does  not  appear,  right - click  on the  [ Sound] screen, and select [Show Disabled Devices ] from
the  menu that appears. Then proceed to the  next step (substep 6).
5 .
30  
						

							Right - click  on [SRS - XB10Stereo],  and select [ Connect] from the  menu that appears.
When the  speaker  is connected, a  checkmark will  appear on [SRS - XB10 Stereo] on the  [ Sound] screen. Proceed to step 
.
If  you cannot  click  [ Connect] for  [SRS - XB10 Stereo],  select [ Disable] for  the  [Default  Device] that currently has a
checkmark (green).
6 .
31  
						

							Hint
For details on  operating your  computer, refer to  the  operating instructions supplied with the  computer.
If  your  computer does not  have a  BLUETOOTH wireless function, it will  be  necessary  to  connect a  commercially  available  BLUETOOTH  adaptor
to  the  computer.
Note
The pairing  mode of  the  speaker  is released  after  about 1  minute  and  the   ( BLUETOOTH ) indicator flashes slowly.  However, when  pairing
information  is not  stored in the  speaker,  such  as at  the  factory  settings, the  pairing  mode is not  released.  If  the  pairing  mode is released  before
finishing  the  process, repeat  from step 
.
Check that the   ( BLUETOOTH )  indicator has  switched from flashing  to a steady light.
When the  speaker  is connected to the  computer, the  
 ( BLUETOOTH )  indicator  stays  lit. You  can enjoy  playing  back music
from your  computer.
If  a  connection cannot  be made,  despite [SRS - XB10] appearing on the  screen, initiate pairing  mode on the  speaker.
Press  and hold the  
 (power)   PAIRING  button  until you hear  beeps and the   (BLUETOOTH )  indicator  begins  to
flash quickly in  white.
5
32  
						

							Once  the  BLUETOOTH devices  are paired, there  is no  need to  pair  them again, except  in the  following cases:
Pairing  information  has been deleted  after  repair,  etc.
The speaker  is already  paired with 8  devices  and  another  device is to  be  paired. 
The speaker  can be  paired with up  to  8  devices.  If  a  new  device is paired after  8  devices  have already  been paired, the  paired device with the
oldest  connection  time is replaced  by the  new  one.
The pairing  information  of  the  speaker  has been deleted  from the  BLUETOOTH  device.
The speaker  is initialized.
All  pairing  information  will  be  deleted.
The speaker  can be  paired with multiple devices,  but  can only  play  music from one  paired device at  a  time.
Related Topic How  to make a  wireless connection with  BLUETOOTH  devices
Connecting with  a  paired  computer  (Windows 8 )
Listening  to music of a  device via BLUETOOTH  connection
Terminating the  BLUETOOTH  connection (After use)
4- 694- 214- 11(2)  Copyright 2017  Sony Corporation
33  
						

							Help Guide
Wireless  Speaker
SRS-XB10
Pairing and  connecting with a computer (Windows  7)
Pairing is the  process required to mutually register  the  information  on BLUETOOTH  devices  to be connected wirelessly.
It  is necessary  to pair a  device with  the  speaker  to be able to make a  BLUETOOTH  connection for  the  first time.  Perform  same
procedures  to pair to other devices.
Do the  following before starting.
Make sure  that your  computer  has the  BLUETOOTH  wireless function.
Place the  speaker  within  1  m (3 ft) of the  computer.
Connect the  speaker  to a  booted computer  or AC  outlet via a  USB  AC  adaptor  (not supplied), otherwise charge the  battery
sufficiently.
Locate  the  operating  instructions supplied with  the  computer  for  reference.
Stop playback  on the  computer.
Turn down  the  volume of the  computer  and speaker  to avoid  any sudden loud sound output  from the  speaker.
Activate  the  BLUETOOTH  function on your  computer. For details how to activate the  BLUETOOTH  function or to confirm that
your  computer  has the  BLUETOOTH  function,  refer to the  operating  instructions of the  computer.
Set the  computer  speakers to ON mode.  If  the  computer  speakers are set  to “Mute (OFF)”  mode,  sound will  not  be produced by the  BLUETOOTH  speakers.
Computer  speakers in  “ Mute (OFF)”  mode
Computer  speakers in  ON mode
Turn on  the  speaker.
The 
 ( BLUETOOTH )  indicator  begins  to flash in  white.
When you turn on the  speaker  for  the  first time after  purchase,  the   (BLUETOOTH )  indicator  will  begin to flash quickly
in  white  and the  speaker  enters  pairing  mode automatically by just  turning on the  speaker. Proceed to step 
.
When you turn on the  speaker, the  speaker  tries to make a  BLUETOOTH  connection with  the  last  connected
BLUETOOTH  device.  If  the  device is nearby and its BLUETOOTH  function is on,  the  BLUETOOTH connection is
1
34  
						

							established automatically and the   (BLUETOOTH )  indicator  stays  lit. When you want to connect another  BLUETOOTH
device,  terminate  the  current BLUETOOTH  connection by operating  the  currently connected BLUETOOTH  device.
Press and  hold  the  
 (power)   PAIRING  button  until you  hear beeps and  the   (BLUETOOTH )
indicator begins to flash quickly  in white.
The speaker  enters  pairing  mode.2
Perform  the  pairing  procedure  on  the  computer.
3 Click  the  [ Start] button  and then  [Devices  and Printers ].
1 .
Click  [Add  a  device].2 .
Select  [SRS - XB10] and click  [ Next].
If  a  passkey* is required on the  display of the  BLUETOOTH  device,  enter “0000.”
3 .
35