Sony Xb10 User Manual

							Hint
When making or receiving  a  call, only  operate  the  speaker  where the   (BLUETOOTH ) indicator lights up.
If  any other  BLUETOOTH  device(s), such  as a  BLUETOOTH  mouse  or BLUETOOTH keyboard,  is connected to  the  BLUETOOTH  device that  is
connecting  with the  speaker,  there  may be  distorted  sound or noise  in the  speaker  output. In  this  case,  terminate the  BLUETOOTH  connection
between the  BLUETOOTH  device and  other  BLUETOOTH  device(s).
Note
If  you reset or initialize  one  of  the  two  speakers while  using  the  Speaker Add function, make sure  to  turn off  the  other  speaker.  If  you do  not  turn
off  the  other  speaker  before  restarting the  Speaker Add function, there  may be  problems  in making a  BLUETOOTH  connection  and  outputting
sound.
Make  a  BLUETOOTH  connection with  a  BLUETOOTH device.
When the  
 ( BLUETOOTH )  indicator  of the  speaker  stops  flashing and lights  up,  the  BLUETOOTH  connection is
established.
3
Start playback  on  the  BLUETOOTH  device,  and  adjust  the  volume  to moderate level.
4
Press the  –/+  (volume) buttons  on  one  of the  speakers  to adjust  the  volume.
Volume  adjustment of one speaker  is reflected on the  other.
5
56  
						

							Related Topic
Switching between  double  mode and stereo  mode (Speaker Add  function)
4- 694- 214- 11(2)  Copyright 2017  Sony Corporation
57  
						

							Help Guide
Wireless  Speaker
SRS-XB10
Switching between double mode  and  stereo mode  (Speaker  Add function)
Using  two  speakers, you can switch  between  monaural  playback  (double mode) and stereo  playback  (stereo mode).
Press the  ADD button  on  either of the  speakers  to change  the  audio  reproduction.
Each time you press the  ADD  button, the  mode changes.
The L /R  indicators on both  speakers show  the  status of audio reproduction.
 Double  mode:  The L /R  indicators on both  speakers are lit up in  white.
 Stereo  mode (L ch/R ch): The L  indicator  on one speaker  and the  R  indicator  on the  other speaker  are lit up in  white.
 Stereo  mode (R ch/L ch): The L indicator  turns off,  and the  R indicator  lights  up in  white  on one speaker. On  the  other
speaker, the  R  indicator  turns off and the  L  indicator  lights  up in  white.
1
58  
						

							Related TopicListening  to music wirelessly  with  two  speakers (Speaker Add  function)
4- 694- 214- 11(2)   Copyright 2017  Sony Corporation
59  
						

							Help Guide
Wireless  Speaker
SRS-XB10
Terminating the Speaker Add function temporarily
To  terminate  the  Speaker Add  function temporarily, follow  the  procedure below.Hint
The Speaker Add function will  not  be  terminated even if the  speaker  is turned  off.  When the  speaker  is turned  on,  the  speaker  will  try  to  establish
the  Speaker Add function with the  other  speaker  that  had  been connected. If  you want  to  use the  Speaker Add function again, turn on  the  other
speaker.  To terminate the  Speaker Add function temporarily  while  in use, press and  hold the  ADD  and  – (volume) buttons  for about 3  seconds until
a  beep is heard.
You can terminate the  Speaker Add function temporarily  while  in use.
The Speaker Add function can be  used even when  connecting  a  portable audio device, etc. to  the  speaker’s  AUDIO IN jack and  playing it.
Related Topic
Listening  to music wirelessly  with  two  speakers (Speaker Add  function)
Switching between  double  mode and stereo  mode (Speaker Add  function)
4- 694- 214- 11(2)   Copyright 2017  Sony Corporation
Press and  hold  the   ADD and  –  (volume) buttons  for about 3 seconds  until a beep is  heard.1
60  
						

							Help Guide
Wireless  Speaker
SRS-XB10
Listening to music of a portable audio  device,  etc.
You  can use the  speaker  as an ordinary wired  speaker  system  by connecting a  portable audio device,  etc., using  an audio cable
(not supplied).
Connect  a device to the  AUDIO IN jack  with  an  audio  cable  (not  supplied).For connection, use an audio cable  with  a  stereo  mini plug (no resistance)
* at both  ends.
1
If  you use an  audio cable  (with  stereo mini  plugs) with significant resistance,  the  sound may be  lower.  Therefore, make sure  you use a  cable  (with
stereo mini  plugs) without resistance.*
Turn on  the  speaker.2
61  
						

							Hint
When you cannot  hear  the  sound,  raise the  volume on  the  connected device.
If  the  BLUETOOTH connection  is active, you can use the  hands-free function while  listening  to  music of  a  portable audio device, etc. that  is
connected to  the  speaker’s  AUDIO IN jack.
Note
When listening  to  music via  BLUETOOTH  connection,  the  output from the  BLUETOOTH  device has priority  even if you connect an  audio cable  to
the   AUDIO IN jack and  play  back.  Stop playback  of  the  BLUETOOTH  device.
When connecting  a  portable audio device to  the  AUDIO IN jack and  playing music, you cannot  use the  buttons  on  the  speaker  to  perform
operations  such  as pause and  skip to  the  beginning of  the  next track.
Do  not  use the  AUDIO IN jack in a  place  where water may splash.
Related Topic Auto power off function
4- 694- 214- 11(2)   Copyright 2017  Sony Corporation
Turn on  and  start playback  on  the  connected  device.3
Adjust the  volume  to a moderate level on  the  connected  device.4
Press the  –/+  (volume) buttons  to adjust  the  volume.
When you press the  – /+  (volume) buttons,  the  
 (BLUETOOTH )  indicator  flashes  once  in  white. 
When you set  the  volume to the  maximum  or minimum level on the  speaker, the  
 ( BLUETOOTH )  indicator  flashes  3
times.
5
62  
						

							Help Guide
Wireless  Speaker
SRS-XB10
Receiving a call
You  can enjoy  hands- free calls  with  a  BLUETOOTH mobile  phone  that supports the  BLUETOOTH profile HFP (Hands- free
Profile)  or HSP  (Headset Profile)  via BLUETOOTH  connection.
If  your  BLUETOOTH  mobile  phone  supports both  HFP and HSP , set  it to HFP.
Operations may vary depending on the  BLUETOOTH  mobile  phone. Refer to the  operating  instructions supplied with  the
mobile  phone.
About ring tones
When an incoming  call arrives, playback  pauses and a  ring tone  will  be heard  via the  speaker.
The ring tone  varies in  the  following ways,  depending on your  BLUETOOTH  mobile  phone.
Ring tone  set  on the  speaker
Ring tone  set  on the  BLUETOOTH  mobile  phone
Ring tone  set  on the  BLUETOOTH  mobile  phone  only for  a  BLUETOOTH  connection
Connect  the  speaker  with  a BLUETOOTH  mobile phone.
The 
 ( BLUETOOTH )  indicator  lights  up in  white  when  the  BLUETOOTH  connection is established.
When  using  the Speaker Add function
Operate the  speaker  where the  dial  tone  or ring tone  is playing. In the  following steps  and operations during  a  hands- free
call,  operate  the  speaker  that is connected to the  BLUETOOTH  mobile  phone.
1
Press the  
 (play) button  when  a call is  received.
Talk into the  microphone of the  speaker.
When an incoming  call arrives, playback  pauses and a  ring tone  is heard  from the  speaker.2
63  
						

							Hint
Some BLUETOOTH mobile  phones  have handset  use priority  when  receiving  a  call. In  the  case  of  the  HFP or HSP  connection,  switch the  call
device to  the  speaker  by operating your  BLUETOOTH  mobile  phone.
The volume of  music playback  and  calling  is set independently in the  speaker.
If  the  caller  cannot  hear  or can barely hear  your  voice, talk  more  directly into the  microphone of  the  speaker.
Note
If  no ring tone  is heard  via the  speaker, the  speaker  may not  be connected with  a  BLUETOOTH  mobile  phone  with  HFP or
HSP . Check the  connection status on the  BLUETOOTH  mobile  phone.
Adjust the  volume  by pressing the  –/+  (volume) buttons  on  the  speaker  or operating the   BLUETOOTH
mobile phone.
When you press the  – /+  (volume) buttons on the  speaker  or adjust the  volume on the  BLUETOOTH  mobile  phone, the  
( BLUETOOTH)  indicator  flashes  once  in  white.
When you set  the  volume to the  maximum  or minimum level on the  speaker, the  
 ( BLUETOOTH )  indicator  flashes  3  times
in  white.
3
To  end  a call,  press the  
 (play) button.
If  you were  listening to music before the  call,  playback  will  resume  when  the  call ends. If  you end a  call by operating  the
BLUETOOTH  mobile  phone, playback  will  also resume  when  the  call ends  if you were  listening to music before the  call.4
64  
						

							When using  the  Speaker Add function, sound of  the  phone call is output from only  the  speaker  where the   (BLUETOOTH ) indicator lights up  in
white.
Depending  on  the  BLUETOOTH  mobile  phone, playback  may not  pause when  an  incoming  call arrives.
Use a  BLUETOOTH  mobile  phone at  least  50  cm (1.6 ft) away from the  speaker.  Noise  may result if the  speaker  and  the  BLUETOOTH  mobile
phone are too  close.
Depending  on  the  model of  your  smartphone,  the  operation system or applications  installed,  some functions  of  hands-free calling  may not  be  used
correctly.
Related Topic
How  to make a  wireless connection with  BLUETOOTH  devices
Terminating the  BLUETOOTH  connection (After use)
Making a  call
4- 694- 214- 11(2)   Copyright 2017  Sony Corporation
65