Sony Xb10 User Manual

Help Guide
Wireless  Speaker
SRS-XB10
Pairing and  connecting with a computer (Windows  8)
Pairing is the  process required to mutually register  the  information  on BLUETOOTH  devices  to be connected wirelessly.
It  is necessary  to pair a  device with  the  speaker  to be able to make a  BLUETOOTH  connection for  the  first time.  Perform  same
procedures  to pair to other devices.
Do the  following before starting.
Make sure  that your  computer  has the  BLUETOOTH  wireless function.
Place the...

When the  [Settings] charms are displayed, click  [Control Panel ].3 .
When [All Control Panel  Items] is displayed, select [Devices  and Printers ].
If  the  [Control Panel ] screen  appears instead of [All Control Panel  Items],  select [Large  icons ] or [Small icons ] from the [ View  by] menu in  the  top  right  corner of the  screen.
The following screen  appears.
4 .
27  

Turn on  the  speaker.
The 
 (BLUETOOTH )  indicator  begins  to flash in  white.
When you turn on the  speaker  for  the  first time after  purchase,  the   (BLUETOOTH )  indicator  will  begin to flash quickly
in  white  and the  speaker  enters  pairing  mode automatically by just  turning on the  speaker. Proceed to step 
.
When you turn on the  speaker, the  speaker  tries to make a  BLUETOOTH  connection with  the  last  connected
BLUETOOTH  device.  If  the  device is nearby and its BLUETOOTH...

Select  [SRS - XB10] and click  [Next].
If  a  passkey* is required,  enter “0000.”
If  [SRS - XB10] does  not  appear,  perform the  operation  again from step 
.
2 .
A  passkey  may be  called “Passcode,” “PIN code,” “PIN number,”  or “Password.”*
When the  following screen  appears, click  [ Close ].
The computer  begins  installing the  driver.
The “”  mark will  appear in  the  bottom left  of the  [SRS - XB10] icon during  installation.  When the  “”  mark
disappears,  driver installation is...

Depending on the  computer, installation may take time.  If  driver installation takes  too  much time,  the  auto  power off
function of the  speaker  will  cause it to turn off automatically. If  this  happens, turn on the  speaker  again.
Right - click  on [SRS - XB10] in  [Devices] and select [Sound settings] from the  menu that appears.
4 .
Confirm [SRS - XB10 Stereo] on the  [ Sound] screen.
If  there is a  checkmark (green) on [SRS - XB10 Stereo],  proceed to step 
.
If  there is not  a  checkmark...

Right - click  on [SRS - XB10Stereo],  and select [ Connect] from the  menu that appears.
When the  speaker  is connected, a  checkmark will  appear on [SRS - XB10 Stereo] on the  [ Sound] screen. Proceed to step 
.
If  you cannot  click  [ Connect] for  [SRS - XB10 Stereo],  select [ Disable] for  the  [Default  Device] that currently has a
checkmark (green).
6 .
31  

Hint
For details on  operating your  computer, refer to  the  operating instructions supplied with the  computer.
If  your  computer does not  have a  BLUETOOTH wireless function, it will  be  necessary  to  connect a  commercially  available  BLUETOOTH  adaptor
to  the  computer.
Note
The pairing  mode of  the  speaker  is released  after  about 1  minute  and  the   ( BLUETOOTH ) indicator flashes slowly.  However, when  pairing
information  is not  stored in the  speaker,  such  as at  the  factory...

Once  the  BLUETOOTH devices  are paired, there  is no  need to  pair  them again, except  in the  following cases:
Pairing  information  has been deleted  after  repair,  etc.
The speaker  is already  paired with 8  devices  and  another  device is to  be  paired. 
The speaker  can be  paired with up  to  8  devices.  If  a  new  device is paired after  8  devices  have already  been paired, the  paired device with the
oldest  connection  time is replaced  by the  new  one.
The pairing  information  of...

Help Guide
Wireless  Speaker
SRS-XB10
Pairing and  connecting with a computer (Windows  7)
Pairing is the  process required to mutually register  the  information  on BLUETOOTH  devices  to be connected wirelessly.
It  is necessary  to pair a  device with  the  speaker  to be able to make a  BLUETOOTH  connection for  the  first time.  Perform  same
procedures  to pair to other devices.
Do the  following before starting.
Make sure  that your  computer  has the  BLUETOOTH  wireless function.
Place the...

established automatically and the   (BLUETOOTH )  indicator  stays  lit. When you want to connect another  BLUETOOTH
device,  terminate  the  current BLUETOOTH  connection by operating  the  currently connected BLUETOOTH  device.
Press and  hold  the  
 (power)   PAIRING  button  until you  hear beeps and  the   (BLUETOOTH )
indicator begins to flash quickly  in white.
The speaker  enters  pairing  mode.2
Perform  the  pairing  procedure  on  the  computer.
3 Click  the  [ Start] button  and then...