Sony Xb10 User Manual

Help Guide
Wireless  Speaker
SRS-XB10
Making  a call
You  can enjoy  hands- free calls  with  a  BLUETOOTH mobile  phone  that supports the  BLUETOOTH profile HFP (Hands- free
Profile)  or HSP  (Headset Profile)  via BLUETOOTH  connection.
If  your  BLUETOOTH  mobile  phone  supports both  HFP and HSP , set  it to HFP.
Operations may vary depending on the  BLUETOOTH  mobile  phone. Refer to the  operating  instructions supplied with  the
mobile  phone.
Connect  the  speaker  with  a BLUETOOTH  mobile...

Hint
The volume of  music playback  and  calling  is set independently in the  speaker.
If  the  caller  cannot  hear  or can barely hear  your  voice, talk  more  directly into the  microphone of  the  speaker.
Note
Depending  on  the  BLUETOOTH mobile  phone, playback  may not  pause when  making a  call.
Use a  BLUETOOTH  mobile  phone at  least  50  cm (1.6 ft) away from the  speaker.  Noise  may result if the  speaker  and  the  BLUETOOTH  mobile
phone are too  close.
Related Topic
How  to make a...

Help Guide
Wireless  Speaker
SRS-XB10
About the indicators
CHG (charge) indicator (orange)
Note
A  speaker  that  is in use can be  charged if it is connected to  a  booted computer or AC  outlet via  a  USB AC  adapter  (not supplied). In  this  case,  it
may take longer to  charge the  battery depending  on  the  conditions of  use. Therefore, it is recommended  to  turn off  the  speaker  when  charging.
When you use the  speaker  at  a  loud volume for a  long time, the  battery may run low even if...

Help Guide
Wireless  Speaker
SRS-XB10
Precautions
Note  when  using  with a  mobile  phone
For details on operation  of your  mobile  phone  when  receiving  a  telephone  call while transmitting  the  sound using  the
BLUETOOTH connection, refer to the  operating  instructions supplied with  the  mobile  phone.
On safety
Before  operating  the  speaker, be sure  that the  operating  voltage of the  speaker  is identical with  that of your  local power
supply.
Where  purchased:  all  countries/regions...

Help Guide
Wireless  Speaker
SRS-XB10
Notes on charging
Life span  of the built-in lithium ion  battery
The rechargeable battery has a  life span. As  time passes  and the  number  of times  that the  battery is used  increases,  the
capacity of the  rechargeable battery slowly decreases. When the  amount of time that the  battery can be used  seems
significantly  shorter,  despite having  been fully  charged, contact your  nearest Sony dealer.
The life span  of the  rechargeable battery differs...

Help Guide
Wireless  Speaker
SRS-XB10
Notes on water resistant  feature
Water resistant performance  of the speaker
The speaker  has a  water resistant  specification*1*2 and IPX5*3 as specified  in  “Degrees of protection  against ingress of water”  of
the  IEC60529 “Ingress Protection Rating (IP Code).”  However, the  speaker  is not  completely  water- tight.
Do not  drop  the  speaker  into hot  water in  a  bathtub or purposely use it in  water. Depending on usage,  water entering the  speaker
may...

4- 694- 214- 11(2)  Copyright 2017  Sony Corporation
72  

Help Guide
Wireless  Speaker
SRS-XB10
How to care for the speaker when  wet
If  the  speaker  gets wet, first remove  the  water from the  speaker, and then  wipe off the  moisture on the  speaker  using  a  soft, dry
cloth.  Especially in  cold regions,  leaving  moisture on its surface may cause the  speaker  to freeze  and malfunction.  Be sure  to wipe
off the  moisture after  using  the  speaker.
Put the  speaker  on a  towel  or dry  cloth.  Then leave  it at room temperature  and dry  the  speaker...

Help Guide
Wireless  Speaker
SRS-XB10
What is  BLUETOOTH  wireless technology?
BLUETOOTH wireless technology is a  short- range  wireless technology that enables wireless data  communication between  digital
devices, such as a  computer  and digital camera. BLUETOOTH  wireless technology operates within  a  range  of about 10 m (about
30 ft).
Connecting two  devices  as necessary  is common, but  some devices  can be connected to multiple devices  at the  same time.
You  do not  need to use a  cable  for...

We do  not  take any responsibility for the  leakage of  information  during BLUETOOTH communication.
A  device featuring the  BLUETOOTH  function is required  to  conform to  the  BLUETOOTH  standard specified  by Bluetooth SIG and  be
authenticated.  Even  if the  connected device conforms  to  the  above mentioned  BLUETOOTH  standard, some devices  may not  be  connected or
work  correctly, depending  on  the  features or specifications  of  the  device.
Noise  or sound skips  may occur depending  on...