Sony Xb10 User Manual

Hint
If  the  devices  cannot  connect, enter  pairing  mode to  connect.
(The speaker  can be  paired with up  to  8  devices.  If  the  speaker  is paired with multiple devices,  it is necessary  to  enter  pairing  mode to  connect.)
Note
When the  speaker  made a  connection  automatically  with the  last  connected BLUETOOTH device, the  BLUETOOTH function may not  work
properly. In  this  case,  terminate the  BLUETOOTH  connection  by operating the  connected BLUETOOTH  device and  reestablish  a...

Help Guide
Wireless  Speaker
SRS-XB10
Connecting with an NFC-compatible device by One-touch ( NFC)
By  touching  the  speaker  with  an NFC- compatible device such as a  smartphone,  the  speaker  turns on automatically, then
proceeds to pairing  and BLUETOOTH  connection.
Compatible smartphones NFC- compatible smartphones  with  Android  4.x  or later  installed
Compatible Walkman  models
NFC- compatible Walkman  models
*1
NFC
NFC (Near Field  Communication) is a  technology enabling  short- range...

Hint
Even  if the  speaker  is not  turned  on,  the   (BLUETOOTH ) indicator flashes when  touching with a  device. When the  connection  is established, the
 (BLUETOOTH ) indicator lights up  in white.
If  you cannot  connect the  speaker,  try  the  following. Start  the  app  on  the  device and  move the  device slowly over  the  N  marked part of  the  speaker.
If  the  device is in a  case,  remove the  case.
Make sure  that  the  app  screen  is displayed on  the  device.
The app may not  be...

If  you touch a  device on  the  speaker,  the  device terminates  the  BLUETOOTH connection  with the  current  device (NFC-compatible  headset,  etc.),
and  connects  with the  speaker  (One-touch connection  switching).
Note
If  your  device is a  type that  goes into standby mode in response  to  magnetic force, it may not  be  able to  be  connected by NFC.
Related Topic
How  to make a  wireless connection with  BLUETOOTH  devices
Disconnecting the  NFC - compatible device by One- touch ( NFC)...

Help Guide
Wireless  Speaker
SRS-XB10
Disconnecting the NFC-compatible device by One-touch ( NFC)
You  can disconnect  the  speaker  from the  connected NFC - compatible device such as a  smartphone or Walkman, etc. by touching
the  speaker  with  it.
Hint
After  the  speaker  is disconnected from the  device by One-touch, if no  operation is performed  and  no  sound is input for 15  minutes, the  speaker
turns off  automatically  by the  auto  power off  function.
If  you cannot  disconnect the...

Help Guide
Wireless  Speaker
SRS-XB10
Switching devices by One-touch (NFC)
If  you move an NFC- compatible device over  the  N  marked  part of the  speaker  while the  speaker  has been connected with  the
other BLUETOOTH  device,  the  speaker  disconnects from the  BLUETOOTH  device,  then  connects  with  the  NFC- compatible
device that was  just  touched. However, if you are talking on a  BLUETOOTH  mobile  phone  connected to the  speaker, you
cannot  switch  the  BLUETOOTH  connection by One-...

Help Guide
Wireless  Speaker
SRS-XB10
Pairing and  connecting with a computer (Windows  10)
Pairing is the  process required to mutually register  the  information  on BLUETOOTH  devices  to be connected wirelessly.
It  is necessary  to pair a  device with  the  speaker  to be able to make a  BLUETOOTH  connection for  the  first time.  Perform  same
procedures  to pair to other devices.
Do the  following before starting.
Make sure  that your  computer  has the  BLUETOOTH  wireless function.
Place your...

Turn on  the  speaker.
The 
 (BLUETOOTH )  indicator  flashes  in  white.
When you turn on the  speaker  for  the  first time after  purchase,  the   (BLUETOOTH )  indicator  will  begin to flash quickly
in  white  and the  speaker  enters  pairing  mode automatically by just  turning on the  speaker. Proceed to step 
.
When you turn on the  speaker, the  speaker  tries to make a  BLUETOOTH  connection with  the  last  connected
BLUETOOTH  device.  If  the  device is nearby and its BLUETOOTH  function is...

Select  [SRS - XB10].
If  [SRS - XB10] does  not  appear on the  screen, repeat the  procedure from step .
After pairing, the  BLUETOOTH  connection establishes  automatically and [Connected music] will  be displayed on the
screen.
2 .
Check that the   ( BLUETOOTH )  indicator has  switched from flashing  to a steady light.
When the  speaker  is connected to the  computer, the  
 ( BLUETOOTH )  indicator  stays  lit. You  can enjoy  playing  back music
from your  computer.
5
24  

Hint
The procedure explained  above is for guidance only.  For details, refer to  the  operating instructions supplied with the  computer.
You can perform pairing  or connect to  another  BLUETOOTH device even when  a  BLUETOOTH connection  is established. In  this  case,  the
previous connection  will  be  disconnected.
If  your  computer does not  have the  BLUETOOTH  function, it will  be  necessary  to  connect a  commercially  available  BLUETOOTH  adaptor  to  the
computer.
Note
The pairing  mode...