Sony Projector Vpl Vw10ht User Manual

21 (GB)
Using the MENU
The projector is equipped with an on-screen menu for
making various adjustments and settings.
You can select the language for displaying in the
menu.
For details on the selecting the language used in the menu,
see page 17 (GB).
1Press the MENU key.
The menu display appears.
The menu presently selected is shown as a yellow
button.
PICTURE CTRL
CONTRAST: 80
BRIGHT: 50
RGB ENHANCER:30
COLOR TEMP: LOWINPUT-A
2Use the M or m key to select a menu, then press
the , or ENTER key.
The...

22 (GB)
The PICTURE CTRL Menu
The PICTURE CTRL (control) menu is used for
adjusting the picture.
Unadjustable items depending on the input signal are
not displayed in the menu.
CONTRAST
Adjusts the picture contrast.
The higher the setting, the greater the contrast.
The lower the setting, the lower the contrast.
BRIGHT
Adjusts the picture brightness.
The higher the setting, the brighter the picture.
The lower the setting, the darker the picture.
COLOR
Adjusts color intensity.
The higher the setting, the...

23 (GB)
(NTSC3.58/
4.43 only)
Input signals and adjustable/setting items
Input signal
Video or Compo-Pro-RGB1)B&W
S video (Y/C) nent/
gres-
15k RGBsive
Compo-
nent/
HDTV/
DTV
CONTRAST
BRIGHT
COLOR––
HUE
––
SHARP–
RGB––––
ENHANCER
D. PICTURE
––
COLOR
TEMP
COLOR
–––
SYS
DRC-MF
––
 : Adjustable/can be set
– : Not adjustable/can not be set
The INPUT SETTING Menu
The INPUT SETTING menu is used to adjust the
input signal.
Unadjustable items depending on the input signal are
not displayed in the menu.
DOT...

24 (GB)
SHIFT
Adjusts the position of the picture input from the
INPUT A/B connectors.
H adjusts the horizontal position of the picture.
V adjusts the vertical position of the picture.
As the setting for H increases, the picture moves to
the right, and as the setting decreases, the picture
moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the < or the , key to adjust the horizontal
position and the M and m key for the...

25 (GB)
The INPUT SETTING Menu
SCAN CONV (Scan converter)
Converts the signal to display the picture according to
the screen size.
ON: Enlarges the picture according to the screen
aspect. The picture will lose some clarity.
OFF: 
Displays the picture while matching one pixel of
input picture element to that of the LCD. The picture
will be clear but the picture size will be smaller.
Note
When the XGA or SXGA signal is input, this item
will not be displayed.
V SCROLL
Adjusts the vertical position of the...

26 (GB)
Preset signals
Memory Preset signalfH fV SyncSIZENo.(kHz) (Hz)H
1 Video 60 Hz15.734 59.940 H-neg V-neg 1572
2 Video 50 Hz15.625 50.000 H-neg V-neg 1864
315k RGB/Component 60 Hz 15.734 59.940 SonG 1572
415k RGB/Component 50 Hz 15.625 50.000 SonG 1864
5HDTV 33.750 60.000 SonG 2200
6640 × 350VGA mode 131.469 70.086 H-pos V-neg 800
7VGA VESA 85 Hz37.861 85.080 H-pos V-neg 832
8640 × 400PC-9801 Normal24.823 56.416 H-neg V-neg 848
9VGA mode 231.469 70.086 H-neg V-pos 800
10VGA VESA 85 Hz37.861 85.080...

27 (GB)
The SET SETTING Menu
The SET SETTING menu is used for changing the
settings of the projector.
STATUS (on-screen display)
Sets up the on-screen display.
ON: Shows all of the on-screen displays.
OFF: Turns off the on-screen displays except for the
menus, a message when turning off the power,
and warning messages.
INPUT-A
Selects the computer, component, DTV YPBPR or
DTV GBR signal input from the INPUT A
connectors.
Note
If the setting is not correct, “Please check INPUT-A
setting.” appears on the...

28 (GB)
DIGIT KEYSTONE
Corrects the trapezoid caused by the projection angle.
If the base edge is longer,  set a negative value; if the
upper edge is longer, set a positive value to square the
image.
Note
If “ZOOM”, “FULL” or “NORMAL” have been
selected in the ASPECT of the INPUT SETTING, you
can change the trapezoid.
INSTALLATION
Sets to reverse the picture horizontally or vertically.
FLOOR-FRONT: The picture is not reversed.
CEILING-FRONT: The picture is reversed
horizontally and vertically....

29 (GB)
a: Distance between the screen and the center of the lens
b: Distance from the floor to the center of the lens
c: Distance from the floor to the foot of the projector
x: Free
16:9 Screen size (inches) 40 60 80 100 120 150 180 200 250 300
Minimum1260 1930 2600 3270 3930 4940 5940 6610 8270 9940
       a(49 5/8) (76) (102 3/8) (128 7/8) (154 3/4) (194 5/8) (234) (260 3/8) (325 3/4) (391 1/2)
Maximum1470 2240 3010 3780 4550 5710 6860 7630 9560 11480
(58) (88 1/4) (118 5/32) (148 7/8) (179 1/4) (224...

30 (GB)
Ceiling Installation
When installing the projector on the ceiling, use the
PSS-610 Projector Suspension Support.
a: Distance between the screen and the center of the lens
b: Distance between the ceiling and the center of the lens
x: Distance between the ceiling and the center of the screen
16:9 Screen size (inches) 80 100 120 150 180 200 250 300
Minimum2600 3270 3930 4940 5940 6610 8270 9940
      a(102 3/8) (128 7/8) (154 3/4) (194 5/8) (234) (260 3/8) (325 3/4) (391 1/2)
Maximum3010 3780 4550...