Sony Projector Vpl Vw10ht User Manual

 1999 Sony Corporation4-074-835-13(2)
VPL-VW10HT
Operating Instructions
Mode d’emploi
Manual de instrucciones
FR
ES
LCD Video  Projector
GB
VPL-VW10HT 

2 (GB)
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet.  Refer servicing to qualified
personnel only.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)...

3 (GB)
For the customers in Canada
This Class B digital apparatus complies with Canadian
ICES-003.
For the customers in the United Kingdom
WARNING
THIS APPARATUS MUST BE EARTHED
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Green-and-Yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire which is...

4 (GB) 

5 (GB)
EnglishGB
Table of Contents
Overview
Precautions ............................................................... 7 (GB)
Features ..................................................................... 8 (GB)
Location and Function of Controls ......................... 9 (GB)
Front/Left Side ......................................................... 9 (GB)
Rear/Right Side/Bottom ........................................... 9 (GB)
Control panel .............................................................

6 (GB)
Maintenance
Maintenance ............................................................ 34 (GB)
Replacing the Lamp ............................................... 34 (GB)
Cleaning the Air Filter ........................................... 35 (GB)
Troubleshooting ..................................................... 36 (GB)
Other
Specifications ......................................................... 38 (GB)
Index ........................................................................ 42 (GB) 

7 (GB)
Precautions
On safety
• Check that the operating voltage of your unit is
identical with the voltage of your local power
supply.
• Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by qualified
personnel before operating it further.
• Unplug the unit from the wall outlet if it is not to be
used for several days.
• To disconnect the cord, pull it out by the plug. Never
pull the cord itself.
• The wall outlet should be near the unit and easily
accessible.
•...

8 (GB)
Features
High brightness, high picture quality
• New, wide LCD panel
The new high-resolution wide LCD panel (1366 ×
768 dots) provides higher uniformity, reduced ghosts
and an improved contrast ratio.
•High-brightness – 1000 ANSI lumens
The LCD panel with its new 200W UHP lamp,
optical unit and lens achieves a high brightness of
1000 ANSI lumens (16:9 projection), allowing for
improved home viewing.
•High-quality image
In addition to the new wide LCD panel, a variety of
functions are now available...

9 (GB)
Location and Function of
Controls
Front/Left Side
1 Zoom ring
Adjusts the size of the picture.
2 Focus ring
Adjusts the picture focus.
3 Ventilation holes (exhaust)
4 Lens
Remove the lens cap before projection.
5Front remote control detector (SIRCS receiver)
6 Adjusters
When a picture is projected on the out of the screen,
adjust the picture using these adjusters.
For details on how to use the adjusters, see “How to use
the adjuster” on page 10 (GB).
7 Connector panel
For details, see page 12...

10 (GB)
Location and Function of Controls
Adjuster buttons
How to use the adjuster
To adjust the height
Adjust the height of the projector as follows:
1Lift the projector and press the adjuster buttons.
The adjusters will extend from the projector.
2While pressing the buttons, lower the projector.
Then, release the buttons. The adjuster will be
locked, then the height of the projector will be
fixed.
For fine adjustment, turn the adjusters to the right
and the left.
3If necessary, turn the rear adjusters...