Sony Peg S360 Clie Handheld Instructions Manual
Have a look at the manual Sony Peg S360 Clie Handheld Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
201Chapter6Additional information I created an event in Date Book, but it does not appear in the Week view. ,In the Week view, you cannot select overlapping events that have the same start time. If you have two or more events with the same start time, choose the Day view to see overlapping events. I cannot find an image pasted in an Address Book record. ,If you use the Palm Desktop for CLIÉ software to change the category of the Address Book record, you may not be able to locate the pasted image on your CLIÉ handheld. Change the category on your CLIÉ handheld. I cannot start applications installed in the Memory Stick media ,In order to open such applications from the Application Launcher screen, a memory space exceeding the application size must be kept free on your CLIÉ handheld. ,Check if the application files or data files (such as image files) essential to starting the applications are stored under the “/PALM/ Launcher/” directory of the Memory Stick media. If so, the CLIÉ handheld may not be able to access the data files or application files. Copy/move the file data to the CLIÉ handheld using MS Gate (page 148 - 150). ,If you installed application or data from your computer to the CLIÉ handheld through HotSync, and selected Memory Stick as their destination: copy/move the data to your CLIÉ handheld (page 148 - 150). Troubleshooting – Frequently Asked Questions
202Chapter6Additional information HotSync problems I cannot perform a HotSync operation. What should I check to make sure I am doing it correctly? ,Check that the operating system of your computer is Windows® 98/ Windows ® 98 Second Edition/Windows® Me/Windows® 2000 Professional/Windows ® XP. ,Check the Windows task tray to make sure the HotSync Manager is running. If it is not running, open the HotSync Manager from the Start menu. ,Make sure that the USB cable is connected securely to the computer. I performed a HotSync operation, but one of my applications did not synchronize. ,Click the HotSync Manager and choose Custom. Check that the correct conduit is active. I am using Outlook® as my PIM, but I cannot perform a HotSync operation. ,Click the HotSync Manager and choose Custom. Check that the correct conduit is active. ,Check that the correct conduit is installed. Reinstall the HotSync Manager and make sure the correct conduit is selected. ,Make sure that Intellisync Lite is installed. I cannot launch the HotSync Manager. ,Make sure you are not running another program, such as a network or facsimile applications, that use the serial port you selected in the Setup dialog box. ,Back up the Palm Desktop for CLIÉ software, uninstall it, and then reinstall it. Troubleshooting – Frequently Asked Questions Continued on next page
203Chapter6Additional information I tried to perform a local HotSync operation, but it did not complete successfully. Try each of these in turn: ,Check if the HotSync Manager is running. If HotSync Manager is running, exit, and then restart it. ,Make sure that Local Serial is not selected in the HotSync Manager menu or the Palm Desktop for CLIÉ software menu. ,Check that the USB cable is properly connected to the USB connector of your computer. ,Read the HotSync Log for the user account for which you are performing a HotSync operation. ,Make sure your CLIÉ handheld is securely connected to the USB cable. ,Make sure the gold-plated connectors on the USB cable and your CLIÉ handheld are clean. Use a pencil eraser to clean them. I cannot perform a HotSync operation via modem. Check the following on your computer: ,Make sure your computer is turned on and that it does not shut down automatically as part of an energy-saving feature. ,Make sure the modem connected to your computer is turned on and is connected to the outgoing phone line. ,Make sure Modem is selected in the HotSync Manager menu. ,Make sure the modem you are using with your CLIÉ handheld has an on-off switch. Your CLIÉ handheld cannot “wake up” a modem that has an auto-off feature. Troubleshooting – Frequently Asked Questions Continued on next page
204Chapter6Additional information ,Make sure the modem is connected properly to a serial port on your computer and it is connected to an incoming phone line. ,Confirm that the Setup String in the Setup dialog box configures your modem correctly. You may need to select a different Modem Type or enter a custom Setup String. ,Confirm that the Speed setting in the Setup dialog box works for your modem. If you have problems using the “As Fast As Possible” option or a specific speed, try using a slower speed. ,Make sure your modem resets before you try again. (Turn off your modem, wait a minute, then turn it on.) ,Confirm that the telephone cable is securely attached to your modem. ,Make sure the dialing instruction dials the correct phone number. ,If you need to dial an outside line prefix, make sure you selected the Dial Prefix option on your CLIÉ handheld and have entered the correct code. Check the following on your CLIÉ handheld: ,If the telephone line you are using has Call Waiting, make sure you selected the Disable call waiting option under “Modem Sync Phone Setup” on your CLIÉ handheld and entered the correct code. ,Make sure the telephone line you are using is not noisy. This can interrupt communications. ,Check the batteries in your modem and replace them if necessary. I cannot perform an IR HotSync operation. ,Make sure that the HotSync Manager is running and the Serial Port for local operations is set to the simulated port for infrared communication. Troubleshooting – Frequently Asked Questions Continued on next page
205Chapter6Additional information ,On your CLIÉ handheld, make sure that the HotSync application is set to IR to a PC/Handheld. ,Make sure that the IR port of your CLIÉ handheld is aligned directly opposite to, and within a few inches of, the infrared device of your computer. ,IR HotSync operations do not work after you receive a low battery warning. Check the battery power of your CLIÉ handheld. Recharge the battery if necessary. ,If you have problems using a specific speed, select Prefs, Connection, IR to a PC/Handheld, Edit, and then Details. Then select a lower speed in the Details dialog box. My CLIÉ handheld appears to freeze when I place it near my computer. ,Move your CLIÉ handheld away from the computer’s infrared port. ,Make sure that you turn the Beam Receive function off. My CLIÉ handheld displays the message “Waiting for sender” when it is near my computer’s infrared port. ,Your computer’s infrared port may be set to search automatically for the presence of other infrared devices. Do the following to turn off this option: 1In the Windows task bar, select Start, point to Settings, and then select Control Panel. 2Double-click Infrared. 3Click the Options tab. 4Clear the selection of the option “Search for and provide status for devices within range.” 5Click Apply and OK. ,Move your CLIÉ handheld away from the computer’s infrared port. ,Make sure that you turn the Beam Receive function off. Troubleshooting – Frequently Asked Questions Continued on next page
206Chapter6Additional information I cannot cancel a HotSync operation midway. ,You may not be able to cancel a job a few seconds after you start a HotSync operation via a USB connection. Wait for a while and try again. I cannot backup some data with a HotSync operation. ,Some data is designed not to be backed up by a HotSync operation. When I tap the HotSync icon on the HotSync screen, nothing happens on the Palm Desktop for CLIÉ software and my CLIÉ handheld times out. ,Check the Palm Desktop for CLIÉ software HotSync Setup options to confirm that you have the correct settings for local HotSync operations. ,Make a copy of your Palm folder. Uninstall, and then reinstall the Palm Desktop for CLIÉ software. ,Turn on your CLIÉ handheld and then tap the Home icon. Tap the HotSync icon, then tap Local. When I perform a HotSync operation, my information does not transfer to the Palm Desktop for CLIÉ software. ,If you have performed a HotSync operation successfully, but you cannot find the data from your CLIÉ handheld on the Palm Desktop for CLIÉ software, check to see that you have the correct user name selected for viewing data. ,Click the HotSync Manager and then choose Custom. Check that all conduits are set to synchronize files. Troubleshooting – Frequently Asked Questions Continued on next page
207Chapter6Additional information I want to synchronize my computer with more than one CLIÉ handheld. ,When the computer running the Palm Desktop for CLIÉ software is to synchronize with more than one CLIÉ handheld, each CLIÉ handheld must have a unique user name. Assign a unique user name to your CLIÉ handheld the first time you perform a HotSync operation. ,Please be aware that synchronizing with more than one CLIÉ handheld with the same user name causes unpredictable results, and potentially, loss of your personal information. Connection problems I have trouble establishing a network connection to my ISP or dial-in server ,Check the Expanded Service Connection Progress messages to identify the point where the connection fails in the log in procedure. Press the lower half of the scroll button at any point during log in to display these messages. ,Check the information in the Network Log so your ISP or your System Administrator can pinpoint where the log in procedure communication fails and why. To view the Network Log, open the Network Preferences screen and tap the Menu icon. Tap Options, then View Log. Tap the up and down arrows of the scroll bar to see the entire Network Log. Troubleshooting – Frequently Asked Questions
208Chapter6Additional information Beaming problems I cannot beam data to another Palm OS PDA. ,Confirm that your CLIÉ handheld and the other Palm OS PDA are between 4 inches (approximately 10 centimeters) and 8 inches (approximately 20 centimeters) apart, and that the path between the two handhelds is clear of obstacles. Beaming distance to other Palm OS PDA may be different. ,Move your CLIÉ handheld closer to the receiving handheld. ,Make sure that the Beam Receive function of the other Palm OS PDA is turned on. When someone beams data to my CLIÉ handheld, I get a message telling me it is out of memory. ,Your CLIÉ handheld requires a memory space of at least approximately 1.1 times the data size that you are receiving. ,Perform a soft reset. See “Resetting your Sony CLIÉ Handheld” (page 26) for more information. I cannot beam Address Book data. ,You cannot beam Address Book data to a CLIÉ handheld in which Address Book has never been started. Start Address Book and then try beaming Address Book data again. ,You cannot beam images to a Palm OS PDA other than a Sony CLIÉ handheld. Troubleshooting – Frequently Asked Questions
209Chapter6Additional information Troubleshooting – Frequently Asked Questions Recharging problems When I connect my CLIÉ handheld to the AC adapter, it does not recharge. ,Confirm that your CLIÉ handheld is connected securely to the AC adapter. ,Confirm that the AC adapter is plugged into an AC outlet. ,Confirm that you are using the AC adapter that came with your CLIÉ handheld. ,Confirm your CLIÉ handheld is turned off. Otherwise, it will not fully charge. Password problems I forgot the password, and my CLIÉ handheld is not locked. ,You can use Security to delete the password, but your CLIÉ handheld deletes all records marked as private. To back up all data including private records, perform a HotSync operation before you delete the password. Then follow these steps to restore your private records onto your CLIÉ handheld: 1Perform a HotSync operation to back up your data. 2Tap Forgotten Password in Security to remove the password and delete all private records. 3Perform a HotSync operation to synchronize your data and restore the private records by transferring them from your computer to your CLIÉ handheld. I forgot the password and my CLIÉ handheld is locked. ,If you assign a password and lock your CLIÉ handheld, you must perform a hard reset to continue using your CLIÉ handheld. See “Resetting your Sony CLIÉ Handheld” (page 26) for more information.
210Chapter6Additional information Troubleshooting – Frequently Asked Questions “Memory Stick™” media problems I cannot copy/move data from “Memory Stick™” media to my CLIÉ handheld. ,Your CLIÉ handheld requires a memory space of at least approximately 1.1 times the data size that you are copying/moving. I inserted “Memory Stick” media, but the message “Please insert Memory Stick media” appears. ,Your “Memory Stick” media is not recognized by your CLIÉ handheld. Remove it and insert it again.