Sony Peg S360 Clie Handheld Instructions Manual

							131Chapter4Communicating using your Sony CLIÉ Handheld
Beaming between your Sony CLIÉ Handheld
and another Palm OS
® PDA
What you can do with beaming
Your CLIÉ handheld is equipped with an IR (infrared) port that you can use
to beam information to another Palm OS® PDA device that’s close by and
also has an IR port. The IR port is located at the top of your CLIÉ handheld,
behind the small dark shield.
You can beam the following information between your CLIÉ handheld and
another Palm OS PDA:
•The record currently displayed in Address Book, Date Book, To Do List,
or Memo Pad.
•All records of the category currently displayed in Address Book, Date
Book, To Do List, or Memo Pad.
•A special Address Book entry that you designate as your business card.
•An application installed in RAM memory.
Note
Some applications are protected and cannot be beamed, as indicated by a lock 
icon to the side of applications.
IR port 
						

							132Chapter4Communicating using your Sony CLIÉ Handheld
Beaming information
You can beam a record, business card, or category of records between your
CLIÉ handheld and another Palm OS PDA.
1Locate the record, business card, or category you want to
beam.
2Tap the Menu  icon.
3Tap one of the following from the Record menu:
•The Beam command for an individual record
•In Address Book only: Beam Business Card
•Beam Category
4When the Beam dialog box appears, point the IR port directly
at the IR port of the receiving handheld.
Tip
For best results, your CLIÉ handheld and another Palm OS PDA should be 4 to 8
inches (approximately 10 to 20 centimeters) apart, and the path between the two
handhelds must be clear of obstacles and shielded from fluorescent lighting.
Beaming distance to other Palm OS PDA handhelds may be different.
5Wait for the Beam dialog box to indicate that the transfer is
complete before you continue working on your CLIÉ
handheld.
Beaming between your Sony CLIÉ Handheld and another Palm
OS
® PDA 
						

							133Chapter4Communicating using your Sony CLIÉ Handheld
Receiving beamed information
1Turn on your CLIÉ handheld.
2Point the IR port directly at the IR port of the other Palm OS
PDA handheld transmitting the data.
The Beam dialog box is displayed. Beaming data starts.
You can select the category in which you save the data in a dialog box.
3Tap Yes.
The data is saved to the unfiled category.
Note
If Beam Receive in the Preferences menu is set to Off, you cannot receive data using
the beaming feature. Before beaming data, make sure to set Beam Receive to On.
Tips on beaming information
•Incoming data or application should be placed in the Unfiled category.
•You can press the Address Book 
 button for about two seconds to
beam your business card.
•You can use Graffiti to beam the current entry ( 
 then , or  and
then tap 
).
Beaming between your Sony CLIÉ Handheld and another Palm
OS
® PDA 
						

							134Chapter4Communicating using your Sony CLIÉ Handheld
Using “Memory Stick™” media
What is “Memory Stick™” media?
“Memory Stick™” media is a new compact, portable and versatile Integrated
Circuit recording medium with a data capacity that exceeds a floppy disk.
“Memory Stick” media is specially designed for exchanging and sharing
digital data among “Memory Stick” media compatible products such as a
digital video camera. Because it is removable, “Memory Stick” media can
also be used for external data storage.
“Memory Stick” media allows you to exchange data between your CLIÉ
handheld and your computer or a digital camera that supports “Memory
Stick” media. To exchange data via “Memory Stick” media, your CLIÉ
handheld uses the supplied Memory Stick Gate (MS Gate) software.
Types of “Memory Stick” media
There are two types of “Memory Stick” media:
•“MagicGate Memory Stick” media equipped with “MagicGate” copyright
protection technology. “MagicGate Memory Stick” media is distinguished
by the 
 logo.
•“Memory Stick” media that is not equipped with “MagicGate” copyright
protection technology.
You can use both types of “Memory Stick” media.  Note however, that
your CLIÉ handheld does not support the “MagicGate Memory Stick”
technology. You can use “MagicGate Memory Stick” media with your
CLIÉ handheld as a standard “Memory Stick” media.
Note on “MagicGate Memory Stick” media
If you use MS Gate or Windows
® Explorer to copy a protected file onto a “MagicGate
Memory Stick” media or if you handle a folder containing a protected file, the file may
be disabled. To handle copyright-protected files, use a “MagicGate” compliant device
such as Memory Stick Walkman
®, or a Sony VAIO computer with “MagicGate”
compliant application such as OpenMG Jukebox. 
						

							135Chapter4Communicating using your Sony CLIÉ Handheld
Pull “Memory Stick” media out. Push “Memory Stick” media in.
Inserting and removing “Memory Stick” media
Insert “Memory Stick” media into the “Memory Stick” slot as illustrated
below. The contents of the “Memory Stick” media is displayed
automatically.
Note
Insert “Memory Stick” media in the right direction. If “Memory Stick” media is forced
in the wrong way, it may be damaged.
To remove “Memory Stick” media
Make sure that your CLIÉ handheld is not writing to or reading data from
“Memory Stick” media.
Push “Memory Stick” media gently into the slot and then release it so that
“Memory Stick” media pops out. Then pull it out from your CLIÉ handheld.
Using “Memory Stick™” media
The “Memory Stick” indicator
lights in orange while your
CLIÉ handheld is accessing
“Memory Stick” media. 
						

							136Chapter4Communicating using your Sony CLIÉ Handheld
Notes on using “Memory Stick” media
When you use “Memory Stick” media, follow these precautions:
•Avoid touching the terminal of “Memory Stick” media or contacting it
with a metal object.
•Do not drop, bend, or submit “Memory Stick” media to external shock.
•Do not disassemble or modify “Memory Stick” media.
•Avoid getting liquids on “Memory Stick” media.
•Avoid using or storing “Memory Stick” media in a location subject to:
–extremely high temperature such as the hot inside of a car, the
outdoors exposed to direct sunlight, or near a heater.
–direct sunlight–high humidity
–corrosive substances–excessive dust
–magnetic fields
•When storing and carrying “Memory Stick” media, keep it in its original
case to ensure protection of important data.
•Save a backup for important data.
•Avoid removing “Memory Stick” media from the insertion slot while data
is being written or read.
•To avoid damaging or erasing data, do not
– release “Memory Stick” media or unplug the AC power adapter
while formatting, or reading or writing data.
–use “Memory Stick” media in a location subject to static electricity
or electric noise.
•If the battery of your CLIÉ handheld is running out, an error message is
displayed and you cannot exchange data with “Memory Stick” media.  If
this occurs, connect the AC power adapter or fully charge your CLIÉ
handheld.
•Use the MS Gate software to format “Memory Stick” media you use in
your CLIÉ handheld. If you format it using another application, further
operation with your CLIÉ handheld is not guaranteed.
•If you insert “Memory Stick” media that has been formatted by another
application, a message prompting you to format it is displayed. To use
“Memory Stick” media in your CLIÉ handheld, follow the instructions to
format it. Note, however, that all stored data will be erased.
Using “Memory Stick™” media 
						

							137Chapter4Communicating using your Sony CLIÉ Handheld
Protecting the data in “Memory Stick” media 
To prevent accidental erasure of important data, you can use the write
protect tab of “Memory Stick” media.  Slide the tab to the left or right to
enable or disable writing to “Memory Stick” media.
Write enable position
Slide the tab to the left to select the write enable position. You can write and
read the data in “Memory Stick” media.
Write protect position
Slide the tab to the right. You can just view the data in “Memory Stick”
media. Select the write protect position when you do not want to overwrite
or delete the data in the inserted “Memory Stick” media.
Back side
Using “Memory Stick™” media
LOCK
LOCKLOCK
Write Enable
PositionWrite Protect
Position 
						

							138Chapter4Communicating using your Sony CLIÉ Handheld
Starting an application in “Memory Stick” media
To open an application in the “Memory Stick” media from the Application
Launcher screen, tap the arrow V in the upper-right corner of the
Application Launcher screen and select Card (or a category with the Card 
icon). Then, tap the icon of the application you want to open.
Note
If the application you are about to open had been installed to the  “Memory Stick”
media through a HotSync operation, some Sony application may not start. For details,
see page 156.
Starting an application automatically when “Memory
Stick” media is inserted
The Memory Stick Autorun (MS Autorun) allows you to start a specified
application automatically when “Memory Stick” media is inserted into your
CLIÉ handheld. You can select your favorite application as the auto-run
application. For example, if you like watching still images, set PictureGear™
Pocket to start automatically.
See the supplied Add-On Application Guide for details.
Using “Memory Stick™” media 
						

							139Chapter4Communicating using your Sony CLIÉ Handheld
Viewing information of the inserted “Memory Stick”
media (Card Info)
The Card Info gives you the outline (such as the remaining memory space)
of the “Memory Stick” media inserted into your CLIÉ handheld. You can
also give a name to each “Memory Stick” media, which comes in handy
when you have more than one “Memory Stick” media.
1Rotate the Jog Dial™ navigator to select Card Info and press
the Jog Dial navigator. Or tap the Card Info 
 icon on the
Application Launcher screen.
The Card Info screen appears.
Attaching a name to a “Memory Stick” media
1Rotate the Jog Dial™ navigator to select Card Info and press
the Jog Dial navigator. Or tap the Card Info 
 icon on the
Application Launcher screen.
The Card Info screen appears.
2Tap the Menu   icon.
3Tap Rename Card.
The Rename Card dialog box appears.
Using “Memory Stick™” media
Continued on next page 
						

							140Chapter4Communicating using your Sony CLIÉ Handheld
Continued on next page
4Enter a new name for the inserted  “Memory Stick” media.
5Tap Rename.
Formatting “Memory Stick” media
Commercially available “Memory Stick” media is already formatted and
you can use it as soon as you buy it. Follow the procedures below if you
need to format your “Memory Stick” media again:
1Rotate the Jog Dial™ navigator to select MS Gate and press
the Jog Dial navigator. Or tap the MS Gate 
 icon on the
Application Launcher screen.
MS Gate starts up.
2Tap the Menu  icon.
The Menu screen appears.
3Tap Options, and then Format.
The confirmation message appears.
4Tap OK.
Formatting starts.
Using “Memory Stick™” media