Sony Dschx90vb Manual

							1. P P* A S M
Shooting  mode
Memory recall
NO CARD
Memory card/Upload
Scene Recognition icons
Scene Selection
100
Remaining number of recordable images
Aspect ratio  of still  images
18M  / 16M  / 13M  / 10M  / 8.9M / 7.5M / 5.0M / 4.5M / 3.7M / 2.1M / VGA  
Image size of still  images
Image quality of still  images
Frame rate of movies
Record setting  of movies
NFC is activated
Remaining battery 
						

							Remaining battery warning
USB power supply
Flash  charge in progress
AF Illuminator
SteadyShot/Camera shake warning
Airplane mode
GPS Log REC (DSC -HX90V)
GPS position  information  (DSC -HX90V)
Overlay  icon
Micref Level Low
Wind Noise reduction
Database file full/Database file error
Overheating  warning
Smart Zoom/Clear Image Zoom/Digital Zoom
Spot metering area
C:32:00
Self-diagnosis display
Digital level gauge 
						

							View Mode
100-0003
Folder-File number
File format of movies
Protect
DPOF
DPOF set
Auto object framing image
2 . 
Drive mode
Metering mode
Flash  mode/Red-eye reduction
±0.0
Flash  compensation
Focus mode
7500K  A5 G5
White Balance
Focus Area
DRO/Auto HDR
+3 +3 +3
Creative Style/Contrast, Saturation, Sharpness
Smile/Face  Detect.
Soft skin effect
Picture Effect 
						

							Smile  detection sensitivity indicator
3 . 
Lock-on AF
Guide display for Lock-on AF
Bracket indicator
STBY
Movie recording standby
REC 0:12
Recording time of the movie (m:s)
Control ring function
Control wheel function
Focus
1/250
Shutter speed
F3.5
Aperture Value
±0.0
Metered Manual
±0.0
Exposure compensation
ISO400
ISO sensitivity
Shutter speed indicator 
						

							Aperture indicator
Histogram
GPS information  (DSC -HX90V)
90°44′55″N
233°44′55″W
Latitude/longitude display (DSC -HX90V)
Picture Effect error
Auto HDR image warning
2015-1-1 
10:37AM
Date of recording
3/7
File number/Number of images in the view  mode
Copyright information  exists for image
[4] How  to Use
Before  UseUsing the strap
Using the wrist strap
Attach the wrist strap and place your  hand through the loop to prevent damage caused by
dropping the product. 
						

							[5] How  to UseBefore  UseAdjusting the viewfinder
Adjusting the viewfinder (diopter-adjustment)
Adjust the diopter scale to your  eyesight until the display appears clearly in the viewfinder.1.  Slide the Viewfinder pop-up switch (A)  down to raise the viewfinder.
If you slide the Viewfinder pop-up switch when the camera is off, the camera will turn
on.
If you stow the viewfinder  inside the camera, the camera will turn off.
2 .  Grasp both  sides of the eyepiece  (B)  and pull it towards  the monitor side until it clicks.
3.  Slide the diopter-adjustment lever. 
						

							Hint
To store the viewfinder
Grasp both  sides of the eyepiece  and push it into the viewfinder  until it clicks. Then push
down the viewfinder.
Note
Be careful  not to push down on the viewfinder  when it is being  raised.
Be sure  that the eyepiece  is stored in the viewfinder  unit before attempting to push down
the viewfinder. If it is not stored and you try to force the viewfinder  down, a malfunction
may result.
Do not carry the camera by the viewfinder.
[6] How  to Use
Before  UseIn-Camera guide
About the [In-Camera Guide]
The  [In-Camera Guide]  displays descriptions of MENU  items, Fn (Function)  button, and
settings, and if a function  cannot  be set, the reason why.
1.  Press the MENU  or Fn button.
2 .  Select the desired MENU  item using up/down/left/right side on the control  wheel.
3 .  Press the 
/ (In-Camera Guide/Delete) button.
The operation guide  for the MENU  item you have selected in step 2 is displayed.
If you press  the  on the center of the control  wheel after  selecting  an item shown
in gray, the reason the item cannot  be set is displayed. 
						

							[7] How  to UseBefore  UseIn-Camera guide
About the shooting advice
Displays the shooting advice according to the selected shooting mode.1.  Press the 
/ (In-Camera Guide/Delete) button while the shooting screen  is
displayed.
2 .  Press the top/bottom side of the control  wheel to select the desired shooting advice,
then  press  
 on the center.
The shooting advice is displayed.
You can scroll the screen  by pressing the up/down side of the control  wheel.
Hint
To view  all  the shooting advice, select MENU  → (Camera Settings )  → [Shooting  Tip
List].
[8] How  to Use
Preparing the cameraCharging the battery pack
Charging the battery pack while it is inserted in the
camera
When using the camera for the first time, be sure  to charge the battery pack. The charged
battery pack will discharge little by little, even if you do not use it. To avoid missing a
shooting opportunity, charge the battery pack before shooting. 1.  Turn the power OFF.
2 .  Connect the camera with the battery pack inserted to the AC Adaptor  (supplied) using
the micro  USB cable (supplied), and connect  the AC Adaptor  to the wall outlet  (wall
socket).
For customers in the U.S.A. and Canada 
						

							For customers in countries/regions other than the U.S.A. and
Canada
Charge  lamp
Lit: Charging 
Off: Charging finished  
Flashing: Charging error or charging paused temporarily  because the camera is not
within the proper temperature range
If the charge lamp lights up once and then  immediately turns off, the battery pack is
fully charged.
Charging time (Full charge)
The charging time is approximately 230 min. using the AC Adaptor  (supplied).
The charging time may differ depending on the remaining capacity of the battery pack or
the charging conditions.
The battery pack can be charged even when it is not fully depleted.
The above charging time applies when charging a fully depleted battery pack (supplied) at
a temperature of 25°C (77°F).  Charging may take longer depending on the conditions  of
use and the environment.
Note
If the charge lamp flashes when the battery pack is not fully charged, remove the battery 
						

							pack or disconnect the USB cable from the camera and then  re-insert  it to recharge.
If the charge lamp on the camera flashes when the AC Adaptor  is connected to the wall
outlet  (wall socket),  this indicates  that charging is temporarily  stopped because the
temperature is outside the recommended range. When the temperature gets back within
the appropriate range, the charging resumes. We recommend charging the battery pack
at an ambient temperature of between 10°C to 30°C (50ºF to 86ºF).
Connect the AC Adaptor  to the nearest wall outlet  (wall socket).  If malfunctions occur
while using the AC Adaptor, immediately disconnect the plug from the wall outlet  (wall
socket) to disconnect from the power source.
When you use a completely new battery pack or a battery pack that has not been used for
a long time, the charge lamp may flash quickly when the battery is charged for the first
time. If this happens, remove the battery pack or disconnect the USB cable from the
camera and then  re-insert  it to recharge.
Do not continuously or repeatedly charge the battery pack without using it if it is already
fully charged or close to fully charged. Doing so may cause a deterioration in battery
performance.
When charging is finished, disconnect the AC Adaptor  from the wall outlet  (wall socket).
Be sure  to use only genuine Sony brand battery packs, micro  USB cables (supplied) and
AC Adaptors  (supplied).
[9] How  to Use
Preparing the cameraCharging the battery pack
Charging by connecting to a computer
The battery pack can be charged by connecting the camera to a computer using a micro
USB cable. 1.  Turn off the product, and connect  to the USB terminal of the computer.
If you connect  the camera to a computer when power is turned on, the camera will
be powered by the computer while the battery is not charged, which allows you to
import images to a computer without worrying about  the battery running out.