Sony Dschx90vb Manual

							Note
When the product is enlarging an image using image processing, it may temporarily
display the original image prior  to enlarging and then  display the enlarged image.
The DISP (Display Setting)  settings  are  applied for the Auto Review display.
[122] How  to Use
Using shooting functionsSetting the other functions  of this product
FINDER/MONITOR
Sets  the method for switching the display between Electronic Viewfinder and the screen. 1.  MENU  → 
 (Custom  Settings )  → [FINDER/MONITOR] → desired setting.
Menu item details
Auto:
When you look into the Electronic Viewfinder,  the display is switched to the Electronic
Viewfinder automatically.
Viewfinder:
Switch  between the Electronic Viewfinder display and the screen  display by pushing
up/down the pop-up finder. When the Electronic Viewfinder is pushed down, the image is
displayed only on the screen. When the Electronic Viewfinder is pushed up, the screen  is
turned off and the image is displayed only in the Electronic Viewfinder.
Hint
You can assign the [FINDER/MONITOR]  function  to your  preferred key. 
MENU  → 
 (Custom  Settings )  → [Custom Key Settings] → set  [FINDER/MONITOR] to
the preferred key.
Note
When the Electronic Viewfinder is pushed down, the images are  always displayed on the
screen  regardless of the [FINDER/MONITOR]  setting.
[123] How  to Use
Using shooting functionsSetting the other functions  of this product
Release w/o Card
Sets  whether the shutter can be released when no memory card  has been inserted. 
						

							1.  MENU →(Custom  Settings )  → [Release  w/o Card]  → desired setting.
Menu item details
Enable:
Releases the shutter even if no memory card  has been inserted.
Disable:
Does not release the shutter when no memory card  has been inserted.
Note
When no memory card  has been inserted, the images shot will not be saved.
The default  setting  is [Enable] . It is recommended that you select [Disable]  prior  to actual
shooting.
[124] How  to Use
ViewingViewing  still  images
Playing back images
Plays  back the recorded  images. 1.  Press the 
 (Playback) button to switch to the playback  mode.
2 .  Select the image with the control  wheel.
Hint
The product creates an image database file on a memory card  to record and play back
images.  An image that is not registered  in the image database file may not be played
back correctly. To play back images shot using other devices, register those  images to
the image database file using MENU  → [Setup]  → [Recover  Image DB] .
[125] How  to Use
ViewingViewing  still  images
Playback zoom
Enlarges  the image being  played  back. 1.  Display the image you want to enlarge, and slide the W/T (zoom) lever to the T side. 
						

							Slide the W/T (zoom) lever to the W  side to adjust the zoom  scale.
2.  Select the portion you want to enlarge by pressing the top/bottom/right/left side of the
control  wheel.
3 .  Press the MENU  button, or 
 in the center of the control  wheel to exit the playback
zoom.
Hint
You can also enlarge an image being  played  back using MENU.
Note
You cannot  enlarge movies.
[126] How  to Use
ViewingViewing  still  images
Image Index
You can display multiple  images at the same  time in playback  mode. 1.  Slide the W/T (zoom) lever to the W  side while the image is being  played  back.
To change  the number of  images  to  be displayed
MENU  →
(Playback )  → [Image Index]  → desired setting.
Menu item details
9 Images/25 Images
To return to single-image playback
Select the desired image and press  on the center of the control  wheel.
To display a desired image quickly
Select the bar  on the left of the image index screen  using the control  wheel, then  press  the
top/bottom side of the control  wheel. While  the bar  is being  selected,  you can display the
calendar screen  or folder  selection  screen  by pressing 
 in the center. In addition, you can
switch View Mode  by selecting  an icon. 
						

							[127] How  to UseViewingViewing  still  images
Switching the screen display (during playback)
Switches  the screen  display.1.  Press the DISP (Display Setting)  button.
The screen  display switches in the order “Display All Info.  → Histogram → No Disp.
Info.  → Display All Info. ” each time you press  the DISP button.
The DISP (Display Setting)  settings  are  applied for the Auto Review display.
Note
The histogram is not displayed in the following situations:
During  movie playback
During  scrolling playback  of panoramic images
During  slideshows
During  Folder View (MP4)
During  AVCHD  View
During  XAVC  S HD  View
[128] How  to UseViewingDeleting images
Deleting a displayed image
You can delete an image displayed.
1.  Display the image you want to delete.
2 .  Press the 
(Delete)  button.
3 .  Select [Delete]  using the control  wheel, then  press  
on the center of the control
wheel.
[129] How  to Use
ViewingDeleting images
Deleting multiple selected images 
						

							You can delete multiple  selected images.1.  MENU  → 
(Playback )  → [Delete]  → desired setting.
Menu item details
Multiple Img. :
Deletes the selected images.
(1) Select the images to be deleted, then  press  
on the center of the control  wheel. The 
mark is displayed in the check box. To cancel the selection, press   again  to remove
the 
mark.
(2) To delete other images,  repeat step (1).
(3) MENU  → [OK]  → Press
on the center.
All in this Folder :
Deletes all  images in the selected folder.
All with this date :
Deletes all  images in the selected date  range.
Hint
Perform [Format]  to delete all  images,  including  protected images.
Note
The menu  items that can be selected differ depending on the [View  Mode] setting.
[130] How  to Use
ViewingPlaying back movies
Playing back movies
Plays  back the recorded  movies. 1.  Press the 
 (playback) button to switch to playback  mode.
2 .  Select the movie to be played  back using the control  wheel.
3 .  To play back movies,  press  
on the center.
Available operations during movie playback
You can perform  slow  playback  and sound volume adjustment, etc. by pressing the bottom
side of the control  wheel.
: Playback 
						

							: Pause
: Fast -forward
: Fast -rewind
: Forward slow  playback
: Reverse slow  playback
: Next movie file
: Previous movie file
: Displays the next frame
: Displays the previous frame
: Motion  Shot Video (Shows the tracking  of a subject in motion.)
: Sound volume adjustment
: Closes the operation panel
Hint
“Forward  slow  playback,” “Reverse slow  playback,” “Displays the next frame” and
“Displays the previous frame” are  available  during pause.
[131] How  to Use
ViewingPlaying back movies
Motion Shot Video
You can see the tracking  of the subjects motion  in high-speed,  like  a stroboscopic image. 1.  Press the bottom side of the control  wheel during movie playback, then  select 
.
To exit [Motion Shot Video] playback, select .
If you fail to make  the trail, you can adjust the interval of the image tracking  using 
.
Note
You cannot  save the images made  with [Motion Shot Video] as a movie file.
If the motion  of the subject is too slow  or the subject does not move  enough, the product
may fail to create the image.
Hint
You can also change the interval of the image tracking  using MENU  →  (Playback)
→  [Motion Interval ADJ] . 
						

							[132] How  to UseViewingViewing  panoramic images
Playing back panoramic images
The product automatically scrolls a panoramic image from end to end.1.  Press the 
 (playback) button to switch to playback  mode.
2 .  Select the panoramic image to be played  back using the control  wheel.
3 .  Press 
 on the center to play back the image.
To pause playback, press   on the center again.
To return to the display of the entire  image,  press  the MENU  button.
Note
Panoramic images shot using other products may be displayed in a different size from the
actual size, or may not scroll correctly.
[133] How  to Use
ViewingPrinting
Specify Printing
You can specify in advance on the memory card  which still  images you want to print  out
later.
The 
 (print order) icon will appear on the specified  images.  DPOF refers to “Digital
Print Order Format.”
1.  MENU  → 
 (Playback )  → [Specify Printing]  → desired setting.
Menu item details
Multiple Img.: 
Selects images to order printing. 
						

							(1) Select an image and press  on the center of the control  wheel. The mark is
displayed in the check box. To cancel the selection, press  and delete the mark.
(2) Repeat step (1) to print  other images.
(3) MENU  → [OK] → Press 
 on the center.
Cancel All : 
Clears all  DPOF marks.
Print Setting : 
You can set whether to print  the date  on images registered  with DPOF marks.
Note
You cannot  add the DPOF mark to the following files:
Movies
[134] How  to UseViewingUsing viewing functions
View Mode
Sets  the View Mode  (image display method).
1.  MENU  → 
 (Playback )  → [View  Mode]  → desired setting.
Menu item details
Date View: 
Displays the images by date.
Folder View(Still) : 
Displays only still  images.
Folder View(MP4) : 
Displays only MP4-format movies.
AVCHD View : 
Displays only AVCHD -format movies.
XAVC S HD  View : 
Displays only XAVC S HD -format movies.
[135] How  to Use
ViewingUsing viewing functions
Display Rotation
Selects the orientation when playing back recorded  still  images. 
						

							1.  MENU   →  (Playback )  → [Display Rotation]  → desired setting.
Menu items details
Auto:
When you rotate the camera, the displayed image rotates automatically detecting the
orientation of the camera.
Manual :
A portrait image is displayed as a vertical image.  If you have set the image orientation using
the [Rotate] function, the image will be displayed accordingly.
Off :
Always displays in landscape orientation.
[136] How  to Use
ViewingUsing viewing functions
Slide Show
Automatically  plays back images continuously.
1.  MENU  → 
(Playback )  → [Slide  Show]  → desired setting.
2 .  Select [Enter] .
Menu item details
Repeat:  
Select [On] , in which images are  played  back in a continuous loop, or [Off] , in which the
product exits the slideshow when all  the images are  played  back once.
Interval:  
Select the display interval for images from among [1 Sec] , [3 Sec] , [5 Sec] , [10 Sec]  or [30
Sec] .
To quit the slideshow in the middle of playback
Press the MENU  button to quit the slideshow. You cannot  pause the slideshow.
Hint
You can activate  a slideshow only when [View  Mode] is set to [Date View]  or [Folder
View(Still)]. 
						

							[137] How  to UseViewingUsing viewing functions
Rotate
Rotates  a recorded  still  image counter-clockwise.1.  MENU   → 
 (Playback )  → [Rotate] .
2 .  Press 
on the center of the control  wheel.
The image is rotated counter-clockwise. The image rotates as you press  
on the
center. If you rotate the image once,  the image remains rotated even after  the product
is turned off.
Note
You cannot  rotate the movies.
You may not be able to rotate images shot using other products.
When viewing rotated images on a computer,  the images may be displayed in their
original orientation depending on the software.
[138] How  to Use
ViewingUsing viewing functions
Protect
Protects recorded  images against accidental  erasure. Themark is displayed on
protected images.
1.  MENU  →
(Playback )  → [Protect]  → desired setting.
Menu item details
Multiple Img. : 
Applies or cancels the protection of the selected multiple  images.
(1) Select the image to be protected,  then  press  
 on the center of the control  wheel. The 
 mark is displayed in the check box. To cancel the selection, press   again  to remove
the 
 mark.
(2) To protect other images,  repeat step (1).
(3) MENU   → [OK]  → Press 
 on the center.
All in this Folder :
Protects all  images in the selected folder.