Sony Dschx90vb Manual

							Start up PlayMemories Home and display the main screen, then  launch  [GPS Support  Tool].
Select the drive of the memory card  and update the GPS assist data. Then insert  the
updated memory card  to this product.
[153] How  to Use
Changing settingsSetup menu
GPS Log REC (DSC-HX90V)
You can set the start/end of the GPS log recording.  The product continues to record the
track even when the power is off. To confirm the track,  a computer with an internet
connection and the software PlayMemories Home is required.
1.  MENU   → 
 (Setup )  → [GPS Settings] →  [GPS Log REC] → desired setting.
Menu item details
On:
Starts the GPS log recording.
Off :
Ends the GPS log recording.  When recording is finished, the GPS log will be written  to the
memory card.
Note
When the memory card  is not inserted, or there is no space on the memory card, the
product cannot  save the GPS log data.
Up to 24 hours  of GPS log data  can be recorded  at one time. When the recorded  time of
the GPS log data  exceeds 24 hours, the recording stops automatically.
Up to 99 tracks per  day and up to 999 tracks per  memory card  can be recorded.
Sony does not collect the location  information  and the track information.
Sony provides the location  information  and the track information  to Google Inc., so that
this information  can be displayed on a map  on the computer.
[154] How  to Use
Changing settingsSetup menu
Delete GPS log data (DSC-HX90V)
You can delete all  the GPS log data  which are  recorded  with [GPS Log REC] . 
						

							1.  MENU  →  (Setup )  → [GPS Settings] →  [Delete GPS log data].
[155] How  to Use
Changing settingsSetup menu
Upload Settings(Eye-Fi)
Sets  whether to use the upload  function  when using an Eye-Fi card  (commercially
available). This item appears when an Eye-Fi card  is inserted into the product’s memory
card  slot. 1.  MENU  → 
 (Setup )  → [Upload  Settings]  → desired setting.
2 .  Set  your  Wi-Fi network  or destination on the Eye-Fi card.
For details, refer to the manual supplied with the Eye-Fi card.
3 .  Insert  the Eye-Fi card  you have set up into the product, and shoot  still  images.
Images are  transferred to your  computer,  etc., automatically via the Wi-Fi network.
Menu item details
On:  
Enables the upload  function.
Off :  
Disables the upload  function
Communication status  screen display
: Standby.  No images are  to be sent.
: Upload standby
: Connecting
: Uploading
: Error
Note
Eye-Fi cards  are  only sold in certain  countries/regions.
For more information  on Eye-Fi cards, please  contact the manufacturer or vendor directly.
Eye-Fi cards  can be used only in the countries/regions where they were purchased.  Use
Eye-Fi cards  in accordance with the law  of the countries/regions where you purchased
the card.
Eye-Fi cards  are  equipped with a wireless LAN  function. Do not insert  an Eye-Fi card  into
the product in locations  in which their  use is prohibited, such as on an airplane. When an
Eye-Fi card  is inserted into the product, set [Upload  Settings] to [Off] . When the upload
function  is set to [Off] , the
indicator will be displayed on the product.
Power save mode  will not function  during uploading. 
						

							If  (error) is displayed,  remove the memory card  and reinsert it, or turn the product
off and then  on again. If the indicator appears again, the Eye-Fi card  may be damaged.
Wireless LAN  communication may be influenced by other communication devices. If the
communication status is poor, move  closer to the access point to be connected.
Third parties  may know where you shot the image if you upload  the image containing
GPS information. This is because [GPS On/Off] is set to [On]. Set  [GPS On/Off] to [Off]
before shooting. (DSC -HX90V)
This product does not support Eye-Fi “Endless Memory Mode.” Before  using an Eye-Fi
card, be sure  that “Endless Memory Mode” is turned off.
[156] How  to Use
Changing settingsSetup menu
Tile Menu
Selects whether to always display the first screen  of the menu  when you press  the MENU
button. 1.  MENU   →
(Setup)  → [Tile Menu]  → desired setting.
Menu item details
On:
Always displays the first screen  of the menu  (Tile  Menu).
Off :
Deactivates the Tile Menu  display.
[157] How  to Use
Changing settingsSetup menu
Mode Dial Guide
You can display the description of a shooting mode  when you turn the mode  dial and change
the settings  available  for that shooting mode.
1.  MENU   → 
(Setup)  → [Mode Dial Guide]  → desired setting.
Menu item details
On: 
Displays the Mode  Dial Guide. 
						

							Off : 
Does not display the Mode  Dial Guide.
[158] How  to Use
Changing settingsSetup menu
Delete confirm.
You can set whether [Delete]  or [Cancel] is selected as the default  setting  on the delete
confirmation  screen.
1.  MENU   →
(Setup)  → [Delete confirm.]  → desired setting.
Menu item details
Delete  first: 
[Delete]   is selected as the default  setting.
Cancel first :
[Cancel]  is selected as the default  setting.
[159] How  to Use
Changing settingsSetup menu
Display Quality
You can change the display quality. 1.  MENU  →
(Setup)  → [Display Quality]  → desired setting.
Menu item details
High: 
Displays in high quality.
Standard:  
Displays in standard quality.
Note
When [High]  is set, battery consumption will be higher than  when [Standard]  is set.
[160] How  to Use
Changing settingsSetup menu 
						

							Pwr Save Start Time
You can set the time by which the power goes off automatically.1.  MENU   →
(Setup) →  [Pwr Save Start Time] → desired setting.
Menu item details
30 Min/5 Min /2 Min /1 Min
Note
The power save function  is not activated  when power is being  supplied via USB, when
playing back slideshows, when recording movies,  or when connected to a computer or
TV.
[161] How  to Use
Changing settingsSetup menu
PAL/NTSC Selector
Plays  back movies recorded  with the product on a PAL/NTSC system TV. 1.  MENU  → 
 (Setup )  → [PAL/NTSC Selector]  →  [Enter]
Note
This function  is provided with 1080 50i-compatible devices only. It is not provided with
1080 60i-compatible devices. The 1080 50i-compatible devices have a “50i”  mark on the
bottom of the product.
If you insert  a memory card  that has previously  been formatted with the PAL system,  a
message telling you that you must re-format the card  appears. When you record using the
NTSC system,  re-format the memory card  or use another memory card.
When the NTSC mode  is selected,  the “Running on NTSC.” message always appears on
the start -up screen  each time you turn the product on.
[162] How  to Use
Changing settingsSetup menu
Demo Mode 
						

							The [Demo  Mode] function  displays the movies recorded  on the memory card  automatically
(demonstration), when the camera has not been operated  for a certain  time. Normally  select
[Off].
1.  MENU  → 
(Setup)  → [Demo  Mode]  → desired setting.
Menu item details
On: 
The movie playback  demonstration starts  automatically if the product is not operated  for
about  one minute. Only protected AVCHD  movies are  played  back.
Set  the view  mode  to [AVCHD View] , and protect the movie file with the oldest recorded
date  and time.
Off :  
Does not show the demonstration.
Note
You can set this item only when the product is powered by the AC-UD10/AC-UD11  AC
Adaptor  (sold separately).
Even if [On]  is selected,  the product does not start  a demonstration if there is no movie file
on the memory card.
When [On]  is selected,  the product does not switch to power save mode.
[163] How  to Use
Changing settingsSetup menu
HDMI Resolution
When you connect  the product to a High Definition (HD) TV with HDMI terminals using an
HDMI cable (sold separately), you can select HDMI Resolution to output images to the TV. 1.  MENU  → 
(Setup)  → [HDMI Settings] →  [HDMI Resolution]  → desired setting.
Menu item details
Auto:
The product automatically recognizes an HD  TV and sets the output resolution.
1080p: 
Outputs  signals in HD  picture  quality (1080p).
1080i :  
Outputs  signals in HD  picture  quality (1080i).
Note 
						

							If the images are  not displayed properly using the [Auto] setting, select either  [1080i] or
[1080p] , based on which TV is to be connected.
[164] How  to Use
Changing settingsSetup menu
24p/60p Output (movie) (Only for 1080 60i compatible
models)
Sets  the output format when connecting via HDMI and [Record Setting] is set to [60p
28M(PS)] , [24p  24M(FX)] , [24p  17M(FH)] , [60p  50M] or  [24p  50M].
1 .  MENU  → 
 (Setup )  → [HDMI Settings]  → [HDMI Resolution]  → [1080p].
2 .  MENU  → 
 (Setup )  → [HDMI Settings] → [24p/60p Output] → desired setting.
Menu item details
60p:
Movies are  output as 60p.
24p:
Movies are  output as 24p.
[165] How  to Use
Changing settingsSetup menu
CTRL FOR HDMI
When connecting this product to a “BRAVIA” Sync-compatible TV using an HDMI cable (sold
separately), you can operate this product by aiming  the TV remote control  at the TV.
1.  MENU  → 
(Setup)  → [HDMI Settings]  → [CTRL FOR HDMI]  → desired setting.
Menu item details
On: 
You can operate this product with a TV’s remote control.
Off:  
You cannot  operate this product with a TV’s remote control. 
						

							Note
[CTRL FOR HDMI] is available  only with a “BRAVIA” Sync-compatible TV.
[166] How  to Use
Changing settingsSetup menu
HDMI Info. Display
Selects whether to display the shooting information  when this product and the TV are
connected using an HDMI cable (sold separately). 1.  MENU  → 
 (Setup )  → [HDMI Settings]  → [HDMI Info.  Display]  → desired setting.
Menu item details
On: 
Displays the shooting information  of the played  back image.
Off :  
Does not display the shooting information  of the played  back image.
[167] How  to Use
Changing settingsSetup menu
USB Connection
Selects the appropriate USB connection method for each computer or USB device
connected to this product.
1.  MENU  → 
(Setup)  → [USB Connection]  → desired setting.
Menu item details
Auto: 
Establishes a Mass Storage  or MTP connection automatically, depending on the computer or
other USB devices to be connected. Windows 7 or Windows 8 computers are  connected in
MTP, and their  unique  functions  are  enabled for use.
Mass  Storage : 
Establishes a Mass Storage  connection between this product, a computer,  and other USB
devices.
MTP:  
Establishes an MTP connection between this product, a computer,  and other USB devices. 
						

							Windows 7 or Windows 8 computers are  connected in MTP, and their  unique  functions  are
enabled for use.
Note
It may take some  time to make  the connection between this product and a computer
when [USB Connection] is set to [Auto].
If Device Stage*  is not displayed with Windows 7 or Windows 8, set [USB Connection] to
[Auto].
* Device Stage is a menu  screen  used to manage connected devices, such as a camera
(Function of Windows 7 or Windows 8).
[168] How  to Use
Changing settingsSetup menu
USB LUN Setting
Enhances  compatibility  by limiting of USB connection functions.
1.  MENU   → 
(Setup)  → [USB LUN  Setting]  → desired setting.
Menu item details
Multi: 
Normally, use [Multi].
Single :  
Set   [USB LUN  Setting] to [Single]  only if you cannot  make  a connection.
[169] How  to Use
Changing settingsSetup menu
USB Power Supply
Sets  whether to supply power via the micro  USB cable when the product is connected to a
computer or an USB device. 1.  MENU  → 
 (Setup )  → [USB Power Supply] → desired setting.
Menu item details
On:
Power is supplied to the product via a micro  USB cable when the product is connected to a
computer,  etc. 
						

							Off :
Power is not supplied to the product via a micro  USB cable when the product is connected to
a computer,  etc.
Note
If you use an AC-UD10/AC-UD11 AC adaptor (sold separately), power can be supplied to
the product via USB cable even when the battery pack is not inserted.
[170] How  to Use
Changing settingsSetup menu
Language 
Selects the language to be used in the menu  items, warnings  and messages. 1.  MENU  → 
(Setup)  → [Language] → desired language.
[171] How  to Use
Changing settingsSetup menu
Date/Time Setup
Sets  the date  and time again. 1.  MENU  → 
(Setup)  → [Date/Time Setup]  → desired setting.
Menu item details
Daylight  Savings: 
Selects Daylight Savings [On]/[Off].
Date/Time:  
Sets  the date  and time.
Date Format : 
Selects the date  and time display format.
[172] How  to Use
Changing settingsSetup menu
Area Setting