Sony Dschx90vb Manual

							Menu item details
Select  on This Device: 
Selects an image on the product to be transferred to the smartphone.
(1) Select from among [This Image] , [All Images on This Date] or [Multiple Images] .
The options displayed may differ depending on the View Mode  selected on the camera.
(2) If you select [Multiple Images], select the desired images using 
 on the control  wheel,
then  press  MENU  →  [Enter] .
Select  on Smartphone : 
Displays all  images recorded  on the product’s memory card  on the smartphone.
Note
You can only transfer images that are  saved on the cameras memory card.
You can select an image size to be sent to the smartphone from [Original] , [2M]  or [VGA] . 
To change the image size, refer to the following steps. 
For Android  smartphone 
Start PlayMemories Mobile,  and change the image  size by [Settings]  → [Copy Image Size] .
For iPhone/iPad 
Select PlayMemories Mobile  in the setting  menu, and change the image  size by [Copy Image
Size] .
Some images may not be displayed on the smartphone depending on the recording
format.
You cannot  send XAVC S or AVCHD  format movies.
This product shares  the connection information  for [Send to Smartphone] with a device
that has permission to connect. If you want to change the device that is permitted to
connect  to the product, reset the connection information  by following these  steps. MENU
→  [Wireless]  → [SSID/PW  Reset]. After resetting the connection information, you must
register the smartphone again.
When  [Airplane  Mode] is set to [On] , you cannot  connect  this product and the
smartphone. Set  [Airplane  Mode] to [Off].
[190] How  to Use
Using Wi-Fi functionsTransferring images to a Smartphone
Sending images to an Android smartphone (NFC One- 
						

							touch Sharing)
With just one touch, you can connect  this product and an NFC-enabled Android  smartphone,
and send an image displayed on the product screen  directly to the smartphone. For movies,
you can only transfer MP4 movies recorded  with [
File Format]  set to [MP4].
1 .  Activate the NFC function  of the smartphone.
2 .  Display a single image on the product.
3 .  Touch the smartphone to the product.
The product and the smartphone are  connected, and PlayMemories Mobile
automatically launches  on the smartphone, and then  the displayed image is sent to the
smartphone.
Before  you touch  the smartphone, cancel the sleep and lock-screen  functions  of the
smartphone.
The NFC function  is available  only when the  (N mark) is displayed on the
product.
Touch the smartphone to the product for 1-2 seconds until PlayMemories Mobile
launches.
To transfer two or more images,  select MENU  → (Wireless)  → [Send to
Smartphone]  to select images.  After the connection enabled screen  appears, use
NFC to connect  the product and the smartphone.
About “NFC”
NFC is a technology that enables  short-range wireless communication between various
devices, such as mobile  phones or IC tags, etc. NFC makes  data  communication simpler
with just a touch  on the designated touch -point.
NFC (Near  Field Communication) is an international  standard of short-range wireless
communication technology. 
						

							Note
You can select an image size to be sent to the smartphone from [Original], [2M] , or
[VGA] . 
To change the image size, refer to the following steps. 
For Android  smartphone 
Start PlayMemories Mobile,  and change the image  size by [Settings]  → [Copy Image Size] .
If the Image Index  is displayed on the product, you cannot  transfer images using the NFC
function.
If you cannot  make  a connection, perform  the following:
Launch PlayMemories Mobile  on your  smartphone, and then  move  the smartphone slowly  toward
the 
 (N mark) of this product.
If the smartphone is  in a case, remove it.
If the product is  in a case, remove it.
Confirm  that the NFC function  is  activated  on the smartphone.
When  [Airplane  Mode] is set to [On] , you cannot  connect  the product and the
smartphone. Set  [Airplane  Mode] to [Off].
You cannot  send AVCHD  format movies.
You cannot  send XAVC S format movies.
When you save images to a MAC computer using the Wi-Fi function, use “Wireless Auto
Import.”
[191] How  to Use
Using Wi-Fi functionsTransferring images to a computer
Send to Computer
You can transfer images stored in the product to a computer connected to a wireless access
point or wireless broadband router and easily make  backup copies using this operation.
Before  starting this operation,  install PlayMemories Home on your  computer and register the
access point on the product. 1.  Start your  computer.
2 .  MENU  → 
(Wireless )  → [Send to Computer].
Note
Depending on the application settings  of your  computer,  the product will turn off after
saving the images to your  computer.
You can transfer images from the product to only one computer at a time.
If you want to transfer images to another computer,  connect  the product and the computer
via a USB connection and follow the instructions in PlayMemories Home. 
						

							When you save images to the MAC computer using Wi-Fi function, use Wireless  Auto
Import.
[192] How  to Use
Using Wi-Fi functionsTransferring images to a TV
View on TV
You can view  images on a network -enabled TV by transferring them from the product without
connecting the product and TV with a cable. For some  TVs, you may need to perform
operations on the TV. For details, refer to the operating instructions supplied with the TV. 1.  MENU  → 
(Wireless)  → [View  on TV]  → desired device to be connected.
2 .  When you want to play back images using slideshow, press  
 on the center of the
control  wheel.
To display the next/previous  image manually, press  the right/left side of the control
wheel.
To change the device to be connected, press  the bottom side of the control  wheel,
then  select [Device list].
Slideshow settings
You can change the slideshow settings  by pressing the bottom side of the control  wheel.
Playback Selection : 
Selects the group of images to be shown.
Folder View(Still) :
Selects from [All]  and [All in Folder] .
Date View :
Selects from [All]  and [All in Date Rng.] .
Interval:  
Selects from [Short]  and [Long].
Effects*:
Select from [On]  and [Off].
Playback Image Size : 
						

							Select from [HD] and [4K].
*The  settings  are  effective  only for BRAVIA TV which is  compatible with the functions.
Note
You can use this function  on a TV that supports DLNA renderer.
You can view  images on a Wi-Fi Direct-enabled TV or network -enabled TV (including
wired network -enabled TVs).
If you connect  TV and this product and do not use Wi-Fi Direct, you need to register your
access point first.
Displaying the images on the TV may take time.
Movies cannot  be shown on a TV via Wi-Fi. Use an HDMI cable (sold separately).
[193] How  to Use
Using Wi-Fi functionsChanging the settings  of Wi-Fi functions
Airplane Mode
When you board an airplane, etc., you can temporarily  disable all  the wireless-related
functions  including  Wi-Fi. 1.  MENU   → 
(Wireless )  → [Airplane  Mode]  → desired  setting.
If you set [Airplane  Mode] to [On] , an airplane mark will be displayed on the screen.
[194] How  to Use
Using Wi-Fi functionsChanging the settings  of Wi-Fi functions
WPS Push
If your  access point has the WPS button, you can register the access point to this product
easily by pushing  the WPS button. 1.  MENU  → 
(Wireless )  → [WPS Push].
2 .  Press the WPS button on the access point you want to register.
Note
[WPS Push] works only if the security  setting  of your  access point is set to WPA or WPA2
and your  access point supports the WPS button method. If the security  setting  is set to
WEP or your  access point does not support the WPS button method, perform  [Access 
						

							Point Set.].
For details about  the available  functions  and settings  of your  access point,  see the access
point operating instructions or contact the administrator of the access point.
A connection may not be enabled depending on the surrounding conditions, such as the
type of wall material or if there is an obstruction or poor  wireless signal between the
product and access point.  If that happens, change the location  of the product or move  the
product closer to the access point.
[195] How  to Use
Using Wi-Fi functionsChanging the settings  of Wi-Fi functions
Access Point Set.
You can register your  access point manually. Before  starting the procedure, check the SSID
name  of the access point,  security  system,  and password. The password may be preset in
some  devices. For details, see the access point operating instructions, or consult the access
point administrator. 1.  MENU  → 
(Wireless )  → [Access  Point Set.] .
2 .  Select the access point you want to register.
When the desired access point  is displayed on the screen:  Select the desired
access point.
When the desired access point  is not displayed on the screen:  Select [Manual
Setting]  and set the access point.
*For the input method, refer to “How to use the keyboard.”
If you select [Manual Setting], input the SSID name  of the access point,  then  select
the security  system.
3 .  Input the password, and select [OK] . 
						

							Access points without themark do not require a password.
4 .  Select [OK] .
How to use the keyboard
When manual character entry is required,  a keyboard is displayed on the screen.
1.  Input  box
The characters you entered are  displayed.
2 .  Switch character  types
Each time you press  
 on the center of the control  wheel, the character type
switches among alphabet letters,  numerals and symbols.
3 .  Keyboard
Each time you press  
 on the center, the character that you enter will be displayed.
For example: If you want to enter “abd”
Select the key for “abc” and press   once to display “a” → select “”((5) Move
cursor) and press  
 → select the key for “abc” and press   twice to display “b” →
select the key for “def” and press  
 once to display “d”.
4 .  Finalize
Finalizes  the entered characters.
5 .  Move cursor
Moves  the cursor in the input box to the right  or left.
6 .  Delete 
						

							Deletes the character preceding the cursor.
7. 
Switches  the next character to a capital or small letter.
8 . 
Enters a space.
To cancel the input,  select [Cancel].
Other setting items
Depending on the status or the setting  method of your  access point,  you may want to set
more items.
WPS PIN : 
Displays the PIN code you enter into the connected device.
Priority  Connection:  
Select [On]  or [Off].
IP  Address  Setting : 
Select [Auto]  or [Manual].
IP  Address : 
If you are  entering the IP  address manually, enter the set address.
Subnet Mask /Default Gateway : 
When you set [IP Address Setting] to [Manual] , enter the IP  address to match your  network
environment.
Note
To give the registered  access point priority, set [Priority Connection] to [On].
[196] How  to Use
Using Wi-Fi functionsChanging the settings  of Wi-Fi functions
Edit Device Name
You can change the device name  under Wi-Fi Direct. 1.  MENU  → 
(Wireless )  → [Edit  Device Name].
2 .  Select the input box, then  input the device name  →  [OK] .
For input method, refer to “How  to use the keyboard.” 
						

							[197] How  to UseUsing Wi-Fi functionsChanging the settings  of Wi-Fi functions
Disp MAC Address
Displays the MAC address of this product.1.  MENU   →
(Wireless )  → [Disp MAC Address] .
[198] How  to Use
Using Wi-Fi functionsChanging the settings  of Wi-Fi functions
SSID/PW Reset
This product shares  the connection information  for [Send to Smartphone] and [Smart
Remote  Embedded] with a device that has permission to connect. If you want to change the
device that is permitted to connect, reset the connection information. 1.  MENU  →
(Wireless )  → [SSID/PW  Reset] →  [OK] .
Note
If you connect  this product to the smartphone after  resetting the connection information,
you must register the smartphone again.
[199] How  to Use
Using Wi-Fi functionsChanging the settings  of Wi-Fi functions
Reset Network Set.
Resets all  the network  settings  to default  settings. 1.  MENU  →
(Wireless) →  [Reset Network Set.] →  [OK] .
[200] How  to Use
Adding applications to the productPlayMemories Camera Apps
PlayMemories Camera Apps 
						

							You can add the desired functions  to this product by connecting to the application download
website 
 (PlayMemories Camera Apps) via the Internet. 
Press MENU → (Application) → [Introduction]  for information  about  the service and
available  countries and regions.
[201] How  to Use
Adding applications to the productPlayMemories Camera Apps
Recommended computer environment
For details on the recommended computer environments  for downloading an application and
adding  functions  to the product, refer to the following URL: 
“PlayMemories Camera Apps” website (
http://www.sony.net/pmca/)
[202] How  to Use
Adding applications to the productInstalling  the applications
Opening a service account
You can open a service account, which is required to download applications. 1.  Access the application download website.
http://www.sony.net/pmca/
2 .  Follow the instructions on the screen  and acquire a service account.
Follow the instructions on the screen  to download the desired application to the
product.
[203] How  to Use
Adding applications to the productInstalling  the applications
Downloading applications
You can download applications using your  computer. 1.  Access the application downloading website.
http://www.sony.net/pmca/