Sony Dschx90vb Manual

							Sets  the area  where you are  using the product.1.  MENU   → 
(Setup)  → [Area Setting]  → desired area.
[173] How  to Use
Changing settingsSetup menu
Format
Formats (initializes) the memory card. When you use a memory card  with this product for the
first time, it is recommended that you format the card  using the product for stable
performance of the memory card. Note that formatting  permanently  erases  all  data  on the
memory card, and is unrecoverable. Save valuable data  on a computer,  etc. 1.  MENU  → 
(Setup)  → [Format].
Note
Formatting permanently  erases  all  data  including  even protected images.
[174] How  to Use
Changing settingsSetup menu
File Number
Selects how to assign file numbers to recorded  still  images and MP4 movies. 1.  MENU  → 
(Setup)  → [File Number]  → desired setting.
Menu item details
Series : 
The product will assign numbers to files sequentially up to “9999” without resetting.
Reset:  
The product resets numbers when a file is recorded  in a new folder  and assigns numbers to
files starting with “0001.” 
(When  the recording folder  contains a file, a number one higher than  the largest  number is
assigned.) 
						

							[175] How  to UseChanging settingsSetup menu
Select REC Folder
You can change the folder  on the memory card  where still  images and MP4 movies are  to be
recorded.1.  MENU  → 
(Setup)  → [Select REC Folder]  → desired folder.
Note
You cannot  select the folder  when you select the [Date Form] setting.
[176] How  to Use
Changing settingsSetup menu
New Folder
Creates  a new folder  on the memory card  for recording still  images and MP4 movies.  A new
folder  is created with a folder  number one greater than  the largest  folder  number currently
used.  Images are  recorded  in the newly created folder. A folder  for still  images and a folder
for MP4 movies that have the same  number are  created at the same  time. 1.  MENU  → 
(Setup)  → [New Folder] .
Note
When you insert  a memory card  that was used with other equipment into this product and
shoot  images,  a new folder  may be automatically created.
Up to 4,000  images in total can be stored in one folder. When the folder  capacity is
exceeded, a new folder  may be automatically created.
[177] How  to Use
Changing settingsSetup menu
Folder Name
Still images are  recorded  in a folder  that is automatically created inside the DCIM folder  on 
						

							the memory card. You can change the way folder  names  are  assigned.
1.  MENU  →(Setup)  → [Folder Name]  → desired setting.
Menu item details
Standard Form: 
The folder  name  form is as follows: folder  number + MSDCF. 
Example: 100MSDCF
Date Form:  
The folder  name  form is as follows: folder  number + Y (the last digit)/MM/DD.
Example: 10050405  (Folder number: 100,  date: 04/05/2015)
Note
You cannot  change the [Folder Name]  settings  for movies.
[178] How  to Use
Changing settingsSetup menu
Recover Image DB
If image files were processed on a computer,  problems may occur  in the image database file.
In such cases, the images on the memory card  will not be played  back on this product. If
these  problems happen, repair the file using [Recover  Image DB] .
1 .  MENU   →
(Setup)  → [Recover  Image DB]  → [Enter] .
Note
Use a sufficiently charged battery pack. Low battery power during repairing can cause
damage to data.
[179] How  to Use
Changing settingsSetup menu
Display Media Info.
Displays the recordable time of movies and the number of recordable still  images for the
inserted memory card. 1.  MENU  → 
(Setup)  → [Display Media Info.] . 
						

							[180] How  to UseChanging settingsSetup menu
Version
Displays the version of this product’s software.1.  MENU  → 
(Setup)  → [Version] .
[181] How  to Use
Changing settingsSetup menu
Certification Logo (Overseas model only)
Displays some  of the certification logos for this product. 1.  MENU  →
(Setup)  → [Certification Logo] .
[182] How  to Use
Changing settingsSetup menu
Setting Reset
Resets the product to the default  settings. Even if you perform  [Setting Reset], the recorded
images are  retained. 1.  MENU  → 
(Setup)  → [Setting Reset] → desired setting.
Menu item details
Camera Settings  Reset : 
Initializes the main shooting settings  to the default  settings.
Initialize :  
Initializes all  the settings  to the default  settings.
Note 
						

							Be sure  not to eject the battery pack while resetting.
When you perform  [Initialize], downloaded applications on the product may be uninstalled.
To use these  applications again, re-install them.
[183] How  to Use
Using Wi-Fi functionsConnecting this product and a Smartphone
PlayMemories Mobile
To use [Smart  Remote  Embedded] or [Send to Smartphone], etc., the application PlayMemories Mobile  should  be installed on your  smartphone.
Download  and install the application PlayMemories Mobile  from your  smartphone’s
application store.  If PlayMemories Mobile  is already installed on your  smartphone, be sure  to
update it to the latest version.  
For details on PlayMemories Mobile, refer to the support page (
http://www.sony.net/pmm/ ).
[184] How  to Use
Using Wi-Fi functionsConnecting this product and a Smartphone
Connecting an Android smartphone to this product
1 .  Launch PlayMemories Mobile  on your  smartphone.
2 .  Select the model name  of this product (DIRECT-xxxx: xxxx).
3.  Input the password that is displayed on this product. 
						

							The smartphone is connected to the product.
[185] How  to Use
Using Wi-Fi functionsConnecting this product and a Smartphone
Connecting the product to an iPhone or iPad
1 .  Select the model name  of this product (DIRECT-xxxx: xxxx) on the Wi-Fi setting  screen
of your  iPhone or iPad.
2.  Input the password displayed on this product.
The iPhone or iPad  is connected to the product. 
						

							3.  Confirm  that your  iPhone or iPad  was connected to the “SSID” shown on this product.
4.  Return  to the “Home” screen  and launch  PlayMemories Mobile.
[186] How  to UseUsing Wi-Fi functionsConnecting this product and a Smartphone
Calling up an application using [One-touch(NFC)]
You can call  up a desired application from the application menu  of this product by touching
an NFC-enabled Android  smartphone to the product. If the application you call  up has a
feature that works with the smartphone, the product and the smartphone will be connected
via Wi-Fi. To use this function, register the desired application in advance.
1.  MENU  → 
(Wireless)  → [One-touch(NFC)]  → desired application.
2 .  Switch  this product to shooting mode, then  touch  an NFC-enabled smartphone to the 
 (N mark) on the product for 1-2 seconds.
PlayMemories Mobile  launches  on the smartphone, and the application you have
registered  launches  on this product.
Note 
						

							When the product is in playback  mode, the registered  application will not launch  even if
you touch  the smartphone to the product.
When you call  up an application with one touch, even if that application does not work with
a smartphone, PlayMemories Mobile  on smartphone will launch. Exit PlayMemories
Mobile  without performing an operation.  If you do not exit PlayMemories Mobile, the
smartphone stays in standby  connection status.
[Smart  Remote  Embedded] is assigned  to [One-touch(NFC)] as a default  setting.
[187] How  to Use
Using Wi-Fi functionsControlling this product using a Smartphone
Smart Remote Embedded
You can use a smartphone as the remote controller for this product, and shoot  still
images/movies.  The application PlayMemories Mobile  must be installed on your  smartphone. 1.  MENU  → 
 (Application )  → [Application List]  → [Smart  Remote  Embedded] .
2 .  When the product is ready  for the connection, an information  screen  appears on the
product. Connect the smartphone and the product using that information.
Connection setting  methods differ among smartphones.
3.  Check the composition of the image on the smartphone screen, and then  press  the
shutter button (A)  on the smartphone to shoot  an image.
Use button (B) to change settings  such as [EV] , [Self -Timer]  and [Review Check] .
Note
When you record movies using a smartphone as a remote controller, the monitor of the 
						

							product becomes darker. Also, you cannot  use the viewfinder  for movie recording.
This product shares  the connection information  for [Smart  Remote  Embedded] with a
device that has permission to connect. If you want to change the device that is permitted
to connect  to the product, reset the connection information  by following these  steps.
MENU  → 
 (Wireless) → [SSID/PW  Reset]. After resetting the connection information,
you must register the smartphone again.
Depending on future version upgrades,  the operational  procedures  or screen  displays are
subject to change without notice.
[188] How  to Use
Using Wi-Fi functionsControlling this product using a Smartphone
One-touch connection with an NFC-enabled Android
smartphone (NFC One-touch remote)
You can connect  this product and an NFC-enabled Android  smartphone with one touch,
without performing a complex setup  operation. 1.  Activate the NFC function  of the smartphone.
2 .  Switch  this product to shooting mode.
The NFC function  is available  only when the  (N mark) is displayed on the
screen.
3 .  Touch the product to the smartphone.
The smartphone and the product are  connected, and PlayMemories Mobile  launches
on the smartphone.
Touch the smartphone to the product for 1-2 seconds until PlayMemories Mobile
launches. 
						

							About “NFC”
NFC is a technology that enables  short-range wireless communication between various
devices, such as mobile  phones or IC tags, etc. NFC makes  data  communication simpler
with just a touch  on the designated touch -point.
NFC (Near  Field Communication) is an international  standard of short-range wireless
communication technology.
Note
If you cannot  make  a connection, do as the following:
Launch PlayMemories Mobile  on your  smartphone, and then  move  the smartphone slowly  toward
the 
 (N mark) of this product.
If the smartphone is  in a case, remove it.
If the product is  in a case, remove it.
Check whether the NFC function  is  activated  on your  smartphone.
When  [Airplane  Mode] is set to [On] , you cannot  connect  this product and the
smartphone. Set  [Airplane  Mode] to [Off].
If this product and the smartphone are  connected when the product is in playback  mode,
the displayed image is sent to the smartphone.
[189] How  to Use
Using Wi-Fi functionsTransferring images to a Smartphone
Send to Smartphone
You can transfer still  images/movies to a smartphone and view  them.  The application
PlayMemories Mobile  must be installed on your  smartphone. 1.  MENU  → 
 (Wireless )  → [Send to Smartphone]  → desired setting.
If you press  the (Send to Smartphone) button in playback  mode, the setting
screen  for [Send to Smartphone] will appear.
2 .  If the product is ready  for the transfer, the information  screen  appears on the product.
Connect the smartphone and the product using that information.
The setting  method for connecting the smartphone and the product varies depending
on the smartphone.